Professional Documents
Culture Documents
Etap BR R1
Etap BR R1
Every electrical engineer wants to learn Power system studies at some point for the
career growth, many are not sure about how to get started with the software. ETAP is a
complex software that needs a thorough understanding of the basics of power system
studies. Our ETAP training will help you learn the ETAP software from the scratch and
to get the most of this software for Power system studies.
Our Training Focus on Seven major topics from Power System Studies
Load Flow Analysis | Short Circuit analysis | Motor Acceleration study
Relay coordination | Arc Flash Studies | Harmonic analysis
Transient Stability
1 Introduction about Power System Analysis Introduction about Load Flow Analysis with IEEE 3002-2 and IEEE 399
Control modes of generator with simulation, capability curve, Modelling and simulation of ZIP Loads, VFD, Wind Turbine Generator, Solar
4
Contingency analysis Inverter
Short circuit currents for various faults, Manual calculation, impact Types of Earthing, SLG Current, Earthing Transformer, Specification
6
of Transformer Winding configuration, Significance of X/R ratio requirements for Cables, CB and VT in resistance grounded Systems
Short Circuit Analysis
Breaking, Making and DC Current, IEC 61363, Maximum and
7 Short circuit study for grid connected systems and islanded systems
Minimum Fault Current
8 Real time challenges and case studies Methods of Limiting Short Circuit Current
Motors, Need of Starters, Starting Torque Requirements, Static and NEMA design, Input requirements of Static and Dynamic MAS studies, Types
9
Dynamic Motor starting study of starters,
Motor Acceleration
Studies
Various Motor starting methods, Star - Delta, Soft Starter, VFD, Case studies, Selection of transformer impedance, Motor starting in islanded
10
LRS systems
18 Impact of Source impedance, Needs of Filters, Passive filter design Case studies, real time projects
Critical Clearing, Three Phase Bolted Faults, Relative Angle, Equal Area
19 Introduction to Transient Stability
Criteria, Swing Equation, Significance of Inertia
Transient Stability
Studies
SMIB System Example, Multi Machine modelling, Modelling of
20 Grid Islanding and Load Shedding, Loss of Load, Loss of Generation
AVR and Governor