Professional Documents
Culture Documents
17.52mm glass-LL0.89kN
17.52mm glass-LL0.89kN
17.52mm glass-LL0.89kN
Geometry:
Supports:
Edge supports:
from-to kind of supports
1 2 w,u,v,phi,theta: fixed (all d.o.f supported and clamped)
Spring supports:
----- position ---- ------------ rigidity ---------
Package layer x y z Cx Cy Cz
mm mm mm N/mm N/mm N/mm
1 1 0.00 0.00 0.00 1.00000e+000 1.00000e+000 0.00000e+000
1 1 1500.00 0.00 0.00 0.00000e+000 1.00000e+000 0.00000e+000
Layers:
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: 1844-2 Balustrade 17.52mm -LL0.89kN 5/3/2023 Page: 2
Mechanical properties:
Package layer e-mod. poiss thickn. density alpha t dT prestressing
N/mm² - mm kg/m³ 1/K K N/mm²
1 3 70000.00 0.23 8.00 2550.00 1.0000e-005 0.00 88.00
1 2 1.80 0.48 1.52 1070.00 8.0000e-005 0.00 0.00
1 1 70000.00 0.23 8.00 2550.00 1.0000e-005 0.00 88.00
Loads:
Concentrated loads:
Package x y Fx Fy Fz lx ly
mm mm N N N mm mm
1 750.00 1100.00 0.00 0.00 890.00 100.00 100.00
Face loads:
(constant distributed):
Package pressure
N/mm²
1 0.00000e+000
Dead weight:
Direction vector of gravity acceleration [9.81 m/s²]:
Vx Vy Vz
0.00000 -1.00000 0.00000
Calculation approaches:
Calculation results:
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.