Professional Documents
Culture Documents
3122en2211sap Sapt 012 130 Din
3122en2211sap Sapt 012 130 Din
SAP 012108 DIN covers the displacement range 12 Smooth operation over the entire speed range
108 cm3/rev. at a maximum pressure of 400 bar. It is a Long life due to high demands on materials
modern, compact pump which meets the market’s high
demands on flow performance, pressure, efficiency Corrosion free light metalhousing
and small installation dimensions. The pump is either Less heat generation due to better ability to
mounted directly on the power takeoff or on a frame dissipate heat through housing
bracket via an intermediate shaft.
SAPT 090, 130 is an addition to the SAP series that
supports larger flows and pressure up to 300 bar. Ideal
for applications that require both a high flow and a high
working pressure.
1. Type 8. Connections
P Pump S Sunfab standard
PT* Tipper pump
*Only available in 090 and 130 3122EN2211 1.3 - 1
9. Additional
Sunfab Hydraulics AB, Box 1094, SE824 12 Hudiksvall, Sweden.Tel: +46
0 650367 00, Email: sunfab@sunfab.se Web: www.sunfab.com
SAP/SAPT 012-130 DIN
1. Type 8. Connections
P Pump S Sunfab standard
PT* Tipper pump
*Only available in 090 and 130
9. Additional
0
2. Displacement
012 017 025 034 040 047 056 064 084 090* 108 130* 10. Accessories
*Only available as SAPT 00 No accessories available
3. Direction of rotation
R Right
L Left
4. Shaft seal
N Nitrile
V* HNBR
*Can withstand higher temperature, e.g. on engine PTO. Not available for 012034.
5. Mounting flange
DL4 DIN 4h (ISO 7653D)
6. Shaft
L35 DIN 5462 / ISO 14
H35* DIN 5462 / ISO 14 Ø 8.15
*Not available on SAPT 090.
SAP/SAPT 012108 DIN 012 017 025 034 040 047 056 064 084 090* 108 130*
rpm 500 6 9 13 17 21 24 28 32 42 45 54 65
1000 13 17 25 34 41 47 57 64 84 90 108 130
1500 19 26 38 51 62 71 85 95 125 135 162 195
Displacement
cm3/rev 12.6 17.0 25.4 34.2 41.2 47.1 56.7 63.6 83.6 90.0 108.0 130.0
continuous rpm 2300 2300 2300 2300 1900 1900 1900 1900 1600 1500 1600 1500
intermittent 3000 3000 3000 3000 2500 2500 2500 2500 2100 2000 2100 2000
bar 400 400 400 400 400 400 400 400 400 300 400 300
Weight
3122EN2211 1.3 - 2
kg 6.9 6.9 7.1 7.1 9.8 9.8 9.8 9.8 13.9 9.8 13.9 13.9
Sunfab Hydraulics AB, Box 1094, SE824 12 Hudiksvall, Sweden.Tel: +46 650367 00, Email: sunfab@sunfab.se Web: www.sunfab.com
Tareweight torque (M)
SAP/SAPT 012-130 DIN
SAP/SAPT 012108 DIN 012 017 025 034 040 047 056 064 084 090* 108 130*
rpm 500 6 9 13 17 21 24 28 32 42 45 54 65
1000 13 17 25 34 41 47 57 64 84 90 108 130
1500 19 26 38 51 62 71 85 95 125 135 162 195
Displacement
cm3/rev 12.6 17.0 25.4 34.2 41.2 47.1 56.7 63.6 83.6 90.0 108.0 130.0
continuous rpm 2300 2300 2300 2300 1900 1900 1900 1900 1600 1500 1600 1500
intermittent 3000 3000 3000 3000 2500 2500 2500 2500 2100 2000 2100 2000
bar 400 400 400 400 400 400 400 400 400 300 400 300
Weight
kg 6.9 6.9 7.1 7.1 9.8 9.8 9.8 9.8 13.9 9.8 13.9 13.9
Nm 6.7 6.7 7.0 7.0 11.5 11.5 11.5 11.5 18.5 11.5 18.5 18.5
Direction of rotation
*SAPT
3122EN2211 1.3 - 3
Sunfab Hydraulics AB, Box 1094, SE824 12 Hudiksvall, Sweden.Tel: +46 650367 00, Email: sunfab@sunfab.se Web: www.sunfab.com
SAP/SAPT 012-130 DIN
O 13 0.51 (4x)
206 8.12 98 3.86
A
7,5 0.3 97 3.82 q 80 3.15
55 2.16
115 4.52
40°
74 2.93
0.83
21
102 4.03
-0.002
-0.001
G1/2
3.15
100 3.94
-0,060
-0,030
O 80
141 5.54
186 7.31
Center of gravity
L35 DIN 5462 / ISO 14 S0S Left rotation (L) S0S Right rotation (R)
SPLINE 8x32x34,9
A
52 2.03 54 2.11
55 2.17 54 2.11 52 2.03
12
0.46 21,5 0.85 29,5 1.16 29,5 1.16 21,5 0.85
M12
28 1.1
55 2.17
36,8 1.45
12 0.46
M12
O 8,1 0.32
28 1.1
3122EN2211 1.3 - 4
Sunfab Hydraulics AB, Box 1094, SE824 12 Hudiksvall, Sweden.Tel: +46 650367 00, Email: sunfab@sunfab.se Web: www.sunfab.com
SAP/SAPT 012-130 DIN
O 13 0.51 (4x)
235 9.24 98 3.86
A
7,5 0.3 113 4.46 q 80 3.15
61 2.38
115 4.53
40°
84 3.3
0.99
25,2
115 4.54
-0.002
-0.001
3.15
G1/2
-0,060
-0,030
120 4.72
O 80
156 6.15
111 4.35
Center of gravity 213 8.4
L35 DIN 5462 / ISO 14 S0S Left rotation (L) S0S Right rotation (R)
A
SPLINE 8x32x34,9
28 1.1
55 2.17
36,8 1.45
12 0.47
M12
O 8,1 0.32
28 1.1
3122EN2211 1.3 - 5
Sunfab Hydraulics AB, Box 1094, SE824 12 Hudiksvall, Sweden.Tel: +46 650367 00, Email: sunfab@sunfab.se Web: www.sunfab.com
SAP/SAPT 012-130 DIN
O 13 0.51 (4x)
A 264 10.41 98 3.86
7,5 0.3 122 4.82 q 80 3.15
70 2.74
115 4.52
40°
95 3.73
1.14
29
133 5.23
-0.002
-0.001
3.15
G1/2
-0,060
-0,030
O 80
136 5.35
185 7.29
235 9.27
Center of gravity
L35 DIN 5462 / ISO 14 S0S Left rotation (L) S0S Right rotation (R)
A 65 2.57 65 2.57
SPLINE 8x32x34,9
O 58 2.28 G1 G1 2.28
28 1.1
55 2.17
36,8 1.45
12 0.47
M12
O 8,1 0.32
28 1.1
3122EN2211 1.3 - 6
Sunfab Hydraulics AB, Box 1094, SE824 12 Hudiksvall, Sweden.Tel: +46 650367 00, Email: sunfab@sunfab.se Web: www.sunfab.com
SAP/SAPT 012-130 DIN
WARNING!
Sunfab reserves the right to make changes in design and dimensions without notice. Printing and typesetting errors reserved.
© Copyright 2023 Sunfab Hydraulics AB. All Rights Reserved.
3122EN2211 1.3 - 7
Sunfab Hydraulics AB, Box 1094, SE824 12 Hudiksvall, Sweden.Tel: +46 650367 00, Email: sunfab@sunfab.se Web: www.sunfab.com