Professional Documents
Culture Documents
BFC20903 RPP04 Sem2 20192020
BFC20903 RPP04 Sem2 20192020
BFC20903 RPP04 Sem2 20192020
ENGINEERING
Appendix 2
LECTURE PLAN
3 Name(s) of academic staff Prof. Ir. Dr. Abdul Aziz Bin Abdul Samad; Assoc. Prof. Ts. Dr. Mohd
Haziman Bin Wan Ibrahim; Dr. Shahrul Niza Bin Mokhatar; Dr. Goh
Wan Inn; Dr. Sharifah Salwa Binti Mohd Zuki.
5 Credit Value 3 (3 / 0 / 0)
7 Course Learning Outcome(s) CLO 1: Analyze structural mechanics problems using relevant
method and formula [PLO4 C4]
CLO 2: Produce a project based on the knowledge of structural
mechanics using appropriate tools. [PLO2 P4]
CLO 3: Produce a project based on the knowledge of structural
mechanics using appropriate tools. [PLO5 A3]
Methods
Methods
Outcomes
Course LOs / Program LOs (PLO) KPI
PLO 2
PLO 4
PLO 5
*Indicate the primary causal link between the CLO and PLO by ticking “√” the appropriate box.
10 Content outline of the course/module and the student learning time (SLT) per topic
Guided Learning
Learning (NF2F)
Independent
(F2F)
Total
(NF2F)
Week Course Content CLO
SLT
Practical
Tutorial
Lecture
Others
5. Test 2 1 10 1 2 3
TOTAL 100 25
Percentage Total
Final Assessment CLO (%)
F2F NF2F
SLT
1. Final Examination 1 50 3 6 9
TOTAL 50 9
TOTAL SLT 120
*F2F = face to face, NF2F=Non Face to Face
11 Identify special requirement of
resources to deliver the course
Nil
(e.g., software, nursery,
computer lab, simulation room)
1. Ferdinand P. Beer, E. Russell Johnston, John T. Dewolf, David
12 Main references supporting
F. Mazurek, 6th Edition (Global Edition) Mechanics of Materials,
the course and
McGraw-Hill Boston, MA:, 2012
Additional references 2. Hibbler, R.C., Mechanics of Materials, 9th Edition, Pearson, 2013
supporting the course 3. James M. Gere, Barry J. Goodno ; Mechanics of Materials,
Wadsworth/ Cengage Learning, New York: 2009
4. Ansel C. Ugural ; Mechanics of Materials, Hoboken, NJ: John
FACULTY OF CIVIL AND ENVIRONMENTAL
ENGINEERING
Appendix 2 Wiley, 2008
5. William F. Riley, Leroy D. Sturges and Don H. Morris.;
Mechanics of Materials, Wiley Hoboken, NJ: John, 2007
6. James M. Gere ; Mechanics of materials, Thomson Australia:,
2006
7. Chanson, H. (2004). The Hydraulics of Open Channel Flow: An
Introduction. Amsterdam: Elsevier. [TC175 .C42 2004]
8. Chanson, H. (2004). The Hydraulics of Open Channel Flow: An
Introduction. Amsterdam: Elsevier. [TC175 .C42 2004]
13 Other additional information Nil
14 Course Attendance / 1. Students must attend not less than 80% of the contact hours
Regulations for every course including Compulsory Attendance Course
(Hadir Wajib – HW) and Attendance Only Course (Hadir
Sahaja – HS).
2. Student who does not fulfill (1) of the above is not allowed to
attend further lectures and is not allowed to sit for any further
assessment. Zero mark (0) will be given to student who fails to
comply with (1). As for Compulsory Attendance Course (Hadir
Wajib – HW), student who fails to comply with (1) will be given
Failure Attendance (Hadir Gagal – HG).
3. Student must follow and obey all the University dress rules and
regulations and must discipline themselves to avoid any
disciplinary action.
4. Student must obey safety regulations during the learning and
teaching process.
Name: Dr. Shahrul Niza bin Mokhatar Name: Dr. Ahmad Zurisman Bin Mohd Ali