Professional Documents
Culture Documents
Drawing1 1d89425c0
Drawing1 1d89425c0
Drawing1 1d89425c0
Regenerating model.
Command:
Command:
Command:
Command: L
LINE
Specify first point: <Snap on>
Specify next point or [Undo]: 2.5
Command: O
OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <Through>: <Snap off> 1
Command: DIMSTYLE
Command: *Cancel*
Command: L
LINE
Specify first point: 10
Command: L
LINE
Specify first point: <Snap on>
Specify next point or [Undo]: 2500
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 250
Command: O
OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <1.0000>: 2.54
*Invalid selection*
Expects a point or Exit
Command: F
FILLET
Current settings: Mode = TRIM, Radius = 0.0000
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select first object or [Undo/Polyline/Radius/Trim/Multiple]:
Select second object or shift-select to apply corner or [Radius]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 100
Command: O
OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <2.5400>:
Command:
Command:
Command: _pasteclip Specify insertion point:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command:
Command: _copybase
Specify base point: 2 found
Command:
Command:
Command: _copybase
Specify base point: 2 found
Command:
Command:
Command: _pasteclip Specify insertion point:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: *Cancel*
Command: L
LINE
Specify first point:
Command: O
OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <2.5400>: 1.27
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
LINE
Command:
LINE
Command:
LINE
Command: L
LINE
Specify first point: <Snap on>
Specify next point or [Undo]: 250
Command: O
OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <1.2700>:
Command: O
OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <1.2700>: 5.8
Command: O
OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <5.8000>: 5.08
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 5.08
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 50
Command:
Command:
Command: _pasteclip Specify insertion point:
Command: *Cancel*
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase/Undo]:
Specify next fence point or [Undo]:
Specify next fence point or [Undo]:
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 5.08
Command:
Command:
Command: _pasteclip Specify insertion point:
Command: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 50
Command:
Command:
Command: _pasteclip Specify insertion point:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: RO
ROTATE
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
4 found
Command:
Command:
Command: _pasteclip Specify insertion point:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: RO
ROTATE
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
4 found
Invalid point.
Command: _u ROTATE
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: RO
ROTATE
Current positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0
4 found
Command: L
LINE
Specify first point:
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 2.54
Command:
Command:
Command: _pasteclip Specify insertion point: *Cancel*
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:*Cancel*
Command:
Command:
Command: _copybase
Specify base point: 3 found
Command:
Command:
Command: _pasteclip Specify insertion point:
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase/Undo]:
Specify next fence point or [Undo]:
Specify next fence point or [Undo]:
*Invalid selection*
Expects a point or Fence/cuTting edges/Crossing/mOde/Project
*Invalid selection*
Expects a point or Fence/cuTting edges/Crossing/mOde/Project
*Invalid selection*
Expects a point or Fence/cuTting edges/Crossing/mOde/Project
*Invalid selection*
Expects a point or Fence/cuTting edges/Crossing/mOde/Project
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]: _u
*Invalid selection*
Expects a point or Fence/cuTting edges/Crossing/mOde/Project
*Invalid selection*
Expects a point or Fence/cuTting edges/Crossing/mOde/Project
*Invalid selection*
Expects a point or Fence/cuTting edges/Crossing/mOde/Project
*Invalid selection*
Expects a point or Fence/cuTting edges/Crossing/mOde/Project
*Invalid selection*
Expects a point or Fence/cuTting edges/Crossing/mOde/Project
*Invalid selection*
Expects a point or Fence/cuTting edges/Crossing/mOde/Project
Command: _u TRIM
Command: _u LINE
Command: _u INTELLIPAN
Command: _u PASTECLIP GROUP
Command: _u COPYBASE
Command: _u Grip Edit
Command: _u COPYCLIP GROUP
Command: _u INTELLIPAN
Command: _u PASTECLIP GROUP
Command: _u INTELLIPAN
Command: _u COPYBASE GROUP
Command: _u INTELLIZOOM INTELLIPAN INTELLIZOOM INTELLIZOOM
Command: _u
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]:
Specify next point or [Close/Undo]: *Cancel*
Command: _u INTELLIPAN INTELLIZOOM
Command: _u LINE
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase/Undo]:
Specify next fence point or [Undo]:
Specify next fence point or [Undo]:
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 5.08
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
LINE
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase/Undo]:
Specify next fence point or [Undo]:
Specify next fence point or [Undo]:
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase/Undo]:
Specify next fence point or [Undo]:
Specify next fence point or [Undo]:
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
LINE
Command: O
OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <5.0800>: 2.54
Command: O
OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <2.5400>: 5.08
Command: L
LINE
Specify first point: _mid of *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
Automatic save to C:\Users\PALAFO~1\AppData\Local\Temp\Drawing1_1_4940_586c2480.sv$
...
Command:
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Command: L
LINE
Specify first point:
Specify next point or [Undo]: *Cancel*
Command: EX
EXTEND
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to extend or shift-select to trim or
[Boundary edges/Crossing/mOde/Project]:
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Command: EX
EXTEND
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to extend or shift-select to trim or
[Boundary edges/Crossing/mOde/Project]:
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point: _mid of
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: O
OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <5.0800>: 2.54
Command:
Command:
Command: _pasteclip Specify insertion point:
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase/Undo]:
Specify next fence point or [Undo]:
Specify next fence point or [Undo]:
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase/Undo]:
Specify next fence point or [Undo]:
Specify next fence point or [Undo]:
Command: L
LINE
Specify first point: *Cancel*
Command: O
OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <2.5400>: *Cancel*
Command: O
OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <2.5400>:
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Command: DIM
Command:
Command: *Cancel*
Command:
Command:
Command: _STYLE
Command:
Command:
Command: _DIMSTYLE
Command:
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _DIMSTYLE
Command: DIM
Command: DIM
Enter layer name or select object to specify layer to place dimensions or . for use
current [?/eXit] <"Use Current">:*Cancel*
Command:
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 100
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _ai_selall Selecting objects...done.
Command: L
LINE
Specify first point:
Specify next point or [Undo]: *Cancel*
Command: _u INTELLIZOOM
Command:
Command: _.erase 1 found
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase/Undo]:
Specify next fence point or [Undo]:
Specify next fence point or [Undo]:
Command: DIM
Command: DIM
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase/Undo]:
Specify next fence point or [Undo]:
Specify next fence point or [Undo]:
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase/Undo]:
Specify next fence point or [Undo]:
Specify next fence point or [Undo]:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: D
DIMSTYLE
Command: DIM
Select objects or specify first extension line origin or
[Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify first extension line origin or
[Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify second extension line origin or [Undo]:
Specify dimension line location or second line for angle [Mtext/Text/text
aNgle/Undo]:
Select objects or specify first extension line origin or
[Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify first extension line origin or
[Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify second extension line origin or [Undo]:
Specify dimension line location or second line for angle [Mtext/Text/text
aNgle/Undo]:
Select objects or specify first extension line origin or
[Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify first extension line origin or
[Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify second extension line origin or [Undo]:
Specify dimension line location or second line for angle [Mtext/Text/text
aNgle/Undo]:
Select objects or specify first extension line origin or
[Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Select objects or specify first extension line origin or
[Angular/Baseline/Continue/Ordinate/aliGn/Distribute/Layer/Undo]:
Specify second extension line origin or [Undo]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _pasteclip Specify insertion point: *Cancel*
Command:
Command:
Command: _pasteclip Specify insertion point:
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 220
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase/Undo]:
Specify next fence point or [Undo]:
Specify next fence point or [Undo]:
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase/Undo]:
Specify next fence point or [Undo]:
Specify next fence point or [Undo]:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: L
LINE
Specify first point: _mid of
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: O
OFFSET
Current settings: Erase source=No Layer=Source OFFSETGAPTYPE=0
Specify offset distance or [Through/Erase/Layer] <2.5400>: 1.27
Command: TR
TRIM
Current settings: Projection=UCS, Edge=None, Mode=Quick
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase]:
Select object to trim or shift-select to extend or
[cuTting edges/Crossing/mOde/Project/eRase/Undo]:
Specify next fence point or [Undo]:
Specify next fence point or [Undo]:
Command:
Command:
Command: _mtext
Current text style: "Standard" Text height: 0.2000 Annotative: No
Specify first corner: *Cancel*
Command:
Automatic save to C:\Users\PALAFO~1\AppData\Local\Temp\Drawing1_1_4940_586c2480.sv$
...
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: 297
Command: *Cancel*
Command:
Command:
Command: _pasteclip Specify insertion point: *Cancel*
Command:
Command:
Command: _pasteblock Specify insertion point:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: SC
SCALE 1 found
Invalid point.
Invalid point.
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: <Ortho off>
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: <Polar on>
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*
Command: _u
Command: _u INTELLIPAN INTELLIZOOM INTELLIPAN INTELLIZOOM INTELLIZOOM
Command: _u Grip Edit
Command: _u Grip Edit
Command: _u SCALE
Command: <Polar on>
Command: <Ortho on>
Command: <Polar on>
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: SC
SCALE 1 found
Command: _u SCALE
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: SC
SCALE 1 found
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: *Cancel*
Command: _u INTELLIZOOM
Command: _u Grip Edit
Command: _u SCALE
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: SC
SCALE 1 found
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command:
Command: _copyclip 76 found
Command: *Cancel*
Command:
Command:
Command: _pasteblock Specify insertion point:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
PASTEBLOCK
Specify insertion point:
Command: _u PASTEBLOCK
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: SC
SCALE 1 found
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*
Command: *Cancel*
Command: L
LINE
Specify first point: _mid of
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]: *Cancel*
Command: L
LINE
Specify first point:
Command: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command: TABLE
Command: tablr
Unknown command "TABLR". Press F1 for help.
Command: *Cancel*
Command: TABLE
Command:
Command: _u
Command: _u TABLEDIT
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*
Command: _u TABLEDIT
Command: TABLE
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command: Specify opposite corner:
Command:
Command:
Command: _u TABLEDIT
Command: Specify opposite corner:
Command:
Command:
Command:
Command:
Command:
Command:
Command:
Command: Specify opposite corner:
Command:
Command:
Command:
Command: _copyclip 2 found
Command: *Cancel*
Command:
Command:
Command: _pasteclip Specify insertion point:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: *Cancel*
Command:
Command:
Command: _pasteblock Specify insertion point:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: SC
SCALE 1 found
Command: _u SCALE
Command: _u SCALE
Command: L
LINE
Specify first point: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: 99
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: _mid of
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: <Ortho on>
Command: _u Grip Edit
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: <Ortho on>
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]: _.ISODRAFT
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: SC
SCALE 1 found
Invalid point.
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _mtext
Current text style: "Standard" Text height: 0.2000 Annotative: No
Specify first corner:
Specify opposite corner or [Height/Justify/Line
spacing/Rotation/Style/Width/Columns]:
Command:
Command:
Command:
Command: _mtedit
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
Command:
Command:
Command: _mtedit
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: _u GROUP
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: *Cancel*
Command:
Command: _u INTELLIZOOM
Command:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _pasteblock Specify insertion point:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: UN
UNITS
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: UNGROUP
Command:
Command:
Command:
Command: _bedit
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: _.erase 1 found
Command: T
MTEXT
Current text style: "Standard" Text height: 0.2000 Annotative: No
Specify first corner:
Specify opposite corner or [Height/Justify/Line
spacing/Rotation/Style/Width/Columns]:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: L
LINE
Specify first point: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: _u Grip Edit
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _pasteblock Specify insertion point:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: SC
SCALE 1 found
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: SC
SCALE 1 found
Specify base point:
Specify scale factor or [Copy/Reference]:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command:
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command: *Cancel*
Command:
Command:
Command: _DIMSTYLE
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: *Cancel*
Command:
Command: *Cancel*
Command: L
LINE
Specify first point:
Specify next point or [Undo]:
Specify next point or [Undo]: *Cancel*
Command:
LINE
Command: *Cancel*
Command:
Command:
Command: _pasteblock Specify insertion point:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: SC
SCALE 1 found
Command:
Command: _.erase 1 found
Command: *Cancel*
Command:
Command:
Command: _pasteblock Specify insertion point:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: SC
SCALE 1 found
Plotting viewport 2.
Command:
Command:
Command: _.erase 2 found
Command: *Cancel*
Command:
Command:
Command: _pasteblock Specify insertion point:
Command: Specify opposite corner or [Fence/WPolygon/CPolygon]:
Command: SC
SCALE 1 found
** STRETCH **
Specify stretch point or [Base point/Copy/Undo/eXit]:
Command: *Cancel*
Command:
Command:
Command: _plot
Specify window for printing
Specify first corner: *Cancel*
Plotting viewport 2.
*Invalid*
Command:
Command:
Command: _QSAVE
Command:
Command:
Command: _QSAVE