Professional Documents
Culture Documents
110PH80 6140
110PH80 6140
110PH80 6140
PRODUCT SPECIFICATIONS
Journal Angle: 36° Bearing Type: Sealed Journal
Cone Offset: .031” Seal Type: HSN O-Ring
Cutting Structure: Cone Retention: Ball Bearing
Back Row: SRT Leg Protection: Welded hardfacing and carbide inserts
Gage Row: Ovoid Hydraulic Design: 3 Nozzles with Snap Rings
Inner Row: Ovoid Pin Connection: 6 5/8 API Regular
Gage Inserts: 69 Make-up Torque: 28000 – 32000 ft-lbs. (37963 – 43386 Nm)
Total Inserts: 219 Approx. Weight: 190 lbs. (86 kg)
Shirttail Protection
A very generous application of hardmetal applied to the shirttail edge and leading edge of the bit leg.
Hardmetal and tungsten carbide inserts up the leg and below the reservoir provide near gage stabilization
and enhanced performance in directional applications or where hole swelling is a factor.
P.O. Box 540157 Dallas, Texas 75354 Telephone: (972) 242-1160 Fax: (972) 242-8770
(800) 827-3526 www.varelintl.com customerservice@varelintl.com