Professional Documents
Culture Documents
Eru NRMM 102
Eru NRMM 102
compliance statement
C175 D5e
50 Hz Diesel generator set
Compliance information:
The engine used in this generator set complies with EU NRMM Stage IIIA regulations for non-road engine tested in
accordance with directive 97/68/EC as amended when tested per ISO 8178 D2.
Engine information:
Model: QSB7-G5 Bore: 4.21 in. (107 mm)
Engine nameplate HP: 221 Stroke: 4.88 in. (124 mm)
Type: 4 cycle, in-line, 6 cylinder diesel Displacement: 408 cu. in. (7 liters)
Aspiration: Turbocharged and charge Compression ratio: 17.2:1
air-cooled
Emission control device: Exhaust stack diameter:
Test methods and conditions: Tests to demonstrate compliance with the regulated levels shown above were conducted per
97/68/EC (ref. ISO8178-1) and weighted at load points prescribed in 97/68/EC Annex 3, “test procedures”.(ref.ISO8178-4,D2).
Fuel specifications: 52-54 cetane number, 0.03 Max. Wt.% sulfur, as referenced by directive 97/68/EC.
Reference: 25°C (77°F) air inlet temperature, 40°C (104°F) fuel inlet temperature, 100 kPa (29.53 in Hg). Barometric
pressure, 10.7 g/kg (75 grains H2O/lb) of dry air; Humidity (required for NOx correction), intake restriction set to a maximum
allowable limit for clean filter; Exhaust back pressure set to a maximum allowable limit.
Cummins Inc. Data and specification subject to change without notice ERU-NRMM-102
(10/17)