Professional Documents
Culture Documents
All LP Oval - No Logos
All LP Oval - No Logos
1. Using your Duct Design Calculator, find the equivalent round size for the
rectangular to be converted. If you don’t have a Duct Design Calculator you can
use the following formula to find your round equivalent.
Multiply duct width x duct height then divide by . Find the square root and
multiply that by 2. This will give you your equivalent round size.
2. Using the “Flat Oval Construction” sheet for your desired minor dimension,
find the closest “Equivalent Round” size. Your “Order Size” will be listed in the
column to the right.
Reinforcement Instructions
Reinforcement to be installed in the field along the centerline length of each
duct run. Attach reinforcements to both flat spans along the length of the duct
run at intervals listed in far right column. Reinforcement is typically supplied
cut-to-length with ductwork.
Reinforcement Schedule
C = 1” x ¾” x 20 Gage Zee
D = 1” x ¾” x 18 Gage Zee
E = Use F
F = 1½” x ¾” x 18 Gage Zee
G = 1½” x ¾” x 16 Gage Zee
H = 1½” x ¾” x 11 Gage Zee
I = 2” x 1⅛” x 12 Gage Zee
J = 2” x 1⅛” x 11 Gage Zee
REVISIONS
4
---------Major Dim. -1/8"--------- d
11
�11 vea 1
1 )'7.
11
!11 fie Rod 11
11
On �arger 51ze5-
Vpt1�a(�1]m \ II 1
Minor Di m. - l/8 11 11
11
ln51de-of-Crupler fOG
��ln5tallatiai 11
11
lialvan1zed Met.al 11
-----Flat Span-----
Oval Coupler