Professional Documents
Culture Documents
P127 OrderForm - V27 - 022022
P127 OrderForm - V27 - 022022
Our policy is one of continuous development. Accordingly the design of our products may change at any time.
Whilst every effort is made to produce up to date literature, this document should only be regarded as a guide and is intended
for information purposes only.
Its contents do not constitute an offer for sale or advice on the application of any product referred to in it. We cannot be held
responsible for any reliance on any decisions taken on its contents without specific advice.
000000749831359.xls# 26469Internal
Page 1 of 8 04/30/2024
6
Order form MiCOM P127
Ready-to-use configuration
Variant
NOTES :
1)
Only available with Phase 2 Hardware and V11.C , or later, firmware
3)
Not available
4)
Only available with software version V11, or later, firmware
5)
Only available with software version V11.B, or later, firmware
6)
Only available with Phase 2 Hardware with larger LCD
7)
Not available with Auxiliary voltage/Digital input voltage code T
8)
Only available with larger LCD and V14.A , or later, firmware
9)
Only available with additional 2nd rear port (RS485)
10)
For China only. Inquiry out of China, please contact product manager before tendering
04/30/2024 626469Internal
#
Order form configurator MiCOM P127
Ready-to-use configuration
1-3 4 5 6 7 8 9 10 11 12 13 14
Communication
MODBUS / MODBUS (if 2nd RS485 available)
KBUS / COURIER / MODBUS - not available
IEC60870-5-103 / MODBUS (if 2nd RS485 available) 1
DNP3 / MODBUS (if 2nd RS485 available)
04/30/2024 # 626469Internal
Issue : 1 - As at 01/03/07 Derived from P125-6-7 Cortec
Issue : 2 - As at 13/04/07 Master Text logic now excludes Software Version for Phase 1
Issue : 3 - As at 20/04/07 Date Drivers amended to include conditional protocol and language statements & to correct Soft
Issue : 4 - As at 26/06/07 Reconfigured to use phase selected dates & amend software version per CID SBIA-74EHVF, co
Issue : 5 - As at 29/06/07 Retrospective correction of software to V10.D/AD (was V10.G/AG in error).
Issue : 6 - As at 17/07/07 Retrospective re-addition of Voltage Input to Phase 1 Cortec & master Text (was "0" in error).
Issue : 7 - As at 01/08/07 Cortec Phase 2 & Database amended to show revised availability message for Options V & W p
Issue : 8 - As at 20/12/07 SW V11.B phase 2 released as per SBIA-79ZCKA, release includes addition of Turkish languag
Issue : 9 - As at 20/12/07 SW V11.A (EDF C15-400) phase 2 added per email Guilhen dated 22/01/08 - 22/01/08
Issue : 10 - As at 20/12/07 SW V11.A (EDF C15-400) phase 2 made available in all cases EXCEPT those with Aux Voltag
Issue : 11 - As at 20/12/078 Configurator and Master Text lookup array corrected for Software version description (V11A w
Issue : 12 - Worksheet added showing Phase 2 equivalent of any Phase 1 configuration - 23/06/08
Issue : 13 - As at 23/07/08 table added to select software options dependant on version, voltage and language in line with
Issue : 14 - Retrospective change to T option text (was "ac immune") 14/10/08
Issue : 15 - Retrospective change to Master Text lookup array for software version - 27/01/09
Issue : 16 - SBIA-7S6FBV releases Universal Power Supply, Optional Mounting Variants and V11.C software version - 26/
Issue : 17 - Date Drivers and Database corrected for Aux/Digital volts options for Phase 1 - 08/07/09
Issue : 18 - Database corrected to allow hardware options (digit 14) with any available software option for Phase 2 per F T
Issue : 19 - Database corrected per G Giannitelli's verification - 04/08/09
Issue : 20 - Further Database and BOM corrections per G Giannitelli's verification - 19/08/09
Issue : 21 - Database array correctly sorted to apply option corrections per F Taesch's e-mail - 19/08/09
Issue : 22 - Further Database and BOM corrections per G Giannitelli's verification & Macro removed for demostration purp
Issue : 23 - Cosmetic changes to standardise all Px2x Cortecs - 25/09/09
Issue : 24 - CID SBIA-7W8BWW - 30/09/09
Issue : 25 - CID SBIA-85BC9X addition of 2CTs measurement - 30/06/10
Issue : 26 - Auxiliary Voltage rating for Universal Power Supply option, 'Z', amended to 24-250Vdc/48-240Vac as per CBU
Issue : 27 - SW Version V13.A withdrawn as per SBIA-8DPDSD - 15/02/11
Issue : 28 - CID SBIA-8EQDRU : SW V14.A released - 16/03/11
Issue : 29 - Phase 1 removed from configurator, SW availability updated as per rationalisation project - 31/05/11
Issue : 30 - SW versions 10D & 12A reintegrated to cortec under rationalization project - 07/06/11
Issue : 31 - SW V15.A released per SBIA-8MCH3D, V14.A invalidated with IEC103 protocol - 21/10/11
Issue : 32 - Tendering sheet added - 13/02/12
Issue : 33 - SW version V15.B released as per SBIA-8RHJWV - 21/02/12
Issue : 34 - SW version V15.C released as per SBIA-8YNCWZ - 10/10/12
Issue : 35 - As per SBIA-8ZYH6M - SW versions V11.C, V12.A, V14.A & V15.A invalidated for Chinese language option - 0
Issue : 36 - Equipped PCBAs introduced - 13/08/13
Issue : 37 - As per SBIA-99EB8S - SW version V15.A removed from option
Issue : 38 - As per BLII-9AMCR4 - SW version V15.D released along with Comms options 6 & 7 - 03/09/13
Issue : 39 - SW versions (V10.D & V11.C) obsoleted per SBIA-9AYGDB- 10/09/13
Issue : 40 - SW version V10.D released per SBIA-9CTB9P- 06/11/13
Issue : 41 - SW version V15.E released per RKLI-9KA9JE - V15.D withdrawn 09/06/14
Issue : 42 - As per RKLI-9KRAXG - Graphical Display option with SW V15.B &V15.C withdrawn - 13/06/14
Issue : 43 - As per RKLI-9TC5Y2 S/W version 14.A withdrawn from offer - 12/2/15
Issue : 44 - As per RKLI-AK9KE5 S/W version 16.A released - 15/06/17
Issue : 45 - O2 kill reference warning added - 19/11/19
Issue : 46 - Software version 16.B released as per PEP0568774R - 14/01/20
Issue : 47 - Power supply option 'H' and software versions 10.D (AD), 12.A (CA) & 15.C (FC) removed from offer as per Ob
#626469Internal
Master Text
P127BA0Z112GB0
000000749831359.xls# 26469Internal
Page 5 of 8 04/30/2024
6
P127BA0Z112GB0 Quantity
Location
Item Description
E2072078A0 Extension Board A 1 15
E20720814Z I/O Board 4Z 1 7
E517060101 Operator Label 4
E517719101 Screw Pack 1
E517725101 Product Label 4 17
E517837101 Extractor 2
E518326103 Connection Diagram P125-26-27 1
E518327102 30TE Cardboard Box 1
E518414110 Front Membrane assembly Phase 2 1 2, 3, 6, 29
E843992001 Cable Ties 6
EGN0383004 Case and Chassis 1 1, 4, 12
EZB4018118 Self tapping screw 16 10
EA00026928 VCI Bag 1
EZB5017036 Washer 6 13
EZB5321126 Screw M3 X 16 recessed pan head steel 6 9
1
626469Internal
#
1 2 3 4 5 6 7 8 9 10 11 12 13 14
626469Internal
#
double digit in same row
5
6
7
8
9
10
11
12
13
14
15
16
17
0
0
0
0
0
0
0
0
0
0
0
0
0
626469Internal
#