Professional Documents
Culture Documents
Technical Spec For Containers
Technical Spec For Containers
Modular construction with Film COIL COATING Hekim Sandwich Panel System ready painted steel on the outside
and inside.
PRODUCTION MODE Standard Containers are manufactured in the dimensions of 2.40X5.98X2.57 m and 3.00x7.00x2,57 m
The approximate weights of the containers are (for type HKA1) 2.40X5,98: 1200 kg, and 3.00x7.00: 1500 kg.
All materials used are TSE certified.
Composed of upper chassis, lower chassis and wall carcasses, made of galvanized roll steel sheet manufactured in the roll forming
LOAD BEARING line. (In readymade wall panel containers, the vertical omega profile is galvanized steel). In special projects, following static
SYSTEM calculations, the profile wall thickness and width may be changed, or industrial profiles and DKP/Galvanized column-beam
reinforcement and welding/screws/bolts may be used.
Roof insulation suitable for ~ 1st climate zone (K: 0.45 W/m² K).
Climate Zone OPTIONAL: For the other cliates zones wall,-roof panel thickness can
be increased.
Total external height 2570 excluding the eyebolt (Including eye bolt 2632 mm)
Net internal height 2350 mm,Turkish style (ground stone) wc is reduced to 2060 mm
Exterior Walls 50 mm thick Hekim Sandwich Wall Panel-cold room panel
0,30 thickness, COIL COATING system ready painted S type galvanized steel,
Refer to S-type roll
Panel Inner and Outer Surface
INTERNAL WALLS http://www.hekimpanel.com/wp-content/uploads/sac-deseni.jpg)
Insulation B1 class eps/ Expanded Polistren, Hekimboard Brand, B1 Fire Class 14-16kg/³
FLOOR COVERING
By the floor coverings of WC Containers, acrylic monolithic Turkish style
Covering for only WC containers (Ground Stone) included, reinforced with glass fiber. Areas except the acrylic
monolithic Turkish style WC covered with TPO membrane PVC covering.
ROOF AND CEILING 0.45 mm thick (TS EN 10143 -/+ 0,004 mm) pre-painted COIL COATING
Panel Outer Surface
COVERING system galvanized corrugated sheet , depth is 34 mm)
Door frames are specially formed and equipped with rubber seals.
Internal doors ( Coil Coating System 1,0-1,2mm 840/1960 mm Mdf-lam Press door (external dimensions),
DOOR JOINERY RAL9002 prepainted galvenized steel sheet door
frame ) Leaf thickness:42 mm
Wet area doors ( Coil Coating System 1,0-1,2mm 620x1960 mm miff-lam (external dimensions), leaf thickness: 42 mm
RAL9002 prepainted galvenized steel sheet door
frame ) In WC groups 18 mm 600*1830 mm. MDFLAM door leaves.
External door locks cylinder lock, internal door locks mortise locks , door
Door lock and handle
handles gold or grey colored metal door handles. TSE CERTIFIED
Window (1mm powder coated steel frame) 970/1200 mm PVC - handles PVC
WINDOW JOINERY
Kitchen-WC-Shower 100 x 100 mm PVC fixed culvert
Normal areas Globe Fixtures – Lighting lamps - lighting luminaires TSE CERTIFIED
Lighting fixtures Wet areas
ELECTRICAL and Globe – IP 44,TSE CERTIFIED
Above external door
TELEPHONE
Electrical Sockets, Switches Surface mounted -TSE CERTFIED
INSTALLATIONS
Surface mounted Leakage Current Protection
1x40A 30 mA over current protection relay monofazed-TSE
CERTIFIED
W automat Fuses -TSE CERTIFIED
Fuses, fuse boxes
PVC Fuse boxes -TSE CERTIFIED
Telephone sockets (available at quantity in compliance with layout plan.) TSE CERTIFIED
Distribution line connections To the thermoplastic switch and telephone boxes, by the Orderer.
Loading and unloading operation should be carried out by connecting equal-distance ropes to the lifting plates, mounted on the
two long sides, with locks.
LIFTING SYSTEM The standard containers are for single-story uses.
Upon request containers can be fabricated with two storeys and interlocked as modualr system.
OPTIONAL: Plus Flatpack System: Special packaging system, that chasis of the container with special joints connected and all
accesories filled between chasis within 55cm thickness. This system takes place especially in the overseas shipments of our
FLATPACK SYSTEM containers in 2,40×6,00 m dimensions. It is possible to send 8-10 flatpacked units thanks to this.
HEBO YAPI SAN ve TIC. AS. reserves the RIGHT TO MAKE ANY AMENDMENTS IN THE TECHNICAL DETAILS.