Professional Documents
Culture Documents
Lithium Battery Equalization Instrument 2-24S 32S 15A 20A 25A Specifications
Lithium Battery Equalization Instrument 2-24S 32S 15A 20A 25A Specifications
, Ltd
Heltec Energy
www.heltec-energy.com
Chengdu Heltec Energy Technology Co., Ltd
1. Introduction
2. Working Principle
www.heltec-energy.com
Chengdu Heltec Energy Technology Co., Ltd
3. Model Selection
Technical
Product Model
Index
HTB-J24S HTB-J24S HTB-J24S HTB-J32S HTB-J32S HTB-J32S
SKU
15A 20A 25A 15A 20A 25A
Applicable
2-24S 2-32S
Strings
Battery
LFP/NCM/LTO
Type
Max
Balance 15A 20A 25A 15A 20A 25A
Current
Balance
Charge balancing
Type
Balance Monomer overvoltage protection: 3.65V
parameters Monomer overvoltage recovery: 3.65V
of lithium Forced equalization voltage: 3.65V
iron Equalization monomer voltage difference: 0.005V
phosphate Proportion of the equalization current: 5%~100%
Monomer overvoltage protection: 4.25V
Balance Monomer overvoltage recovery: 4.2V
parameters Forced equalization voltage: 4.25V
of ternary Equalization start voltage: 4V
lithium Equalization monomer voltage difference: 0.005V
Equalization current ratio: 5%~100%
Size (mm) 360*290*170
Weight
6.5 9.5
(kg)
www.heltec-energy.com
Chengdu Heltec Energy Technology Co., Ltd
4. Product Appearance
www.heltec-energy.com
Chengdu Heltec Energy Technology Co., Ltd
www.heltec-energy.com
Chengdu Heltec Energy Technology Co., Ltd
6. Note
a. Before balancing, please check whether the minimum voltage is lower than the
battery over-discharge voltage. If it is lower than the battery over-discharge
voltage, please charge the battery first. Balance the battery after it is fully charged,
the effect will be better.
b. During charging equalization, the "battery negative pole" on the front panel of the
machine must be connected to the negative pole of the whole battery pack, the
negative pole of the charger is connected to the "charge negative pole" on the
front panel of the machine, and the positive pole of the charger is connected to
the positive pole of the battery. The charging current shall not exceed 25A before
entering the equilibrium state, and the charging current shall not exceed 5A when
reaching equilibrium (lithium iron phosphate 3.45V/ternary lithium 4V). Small
current balance effect will be better.
www.heltec-energy.com