Professional Documents
Culture Documents
JDIcon Plus T Product Catalogue
JDIcon Plus T Product Catalogue
conical connection
Made in Italy
PRODUCT FEATURES
5 degree internal
conical connection Narrow coronal diameter
(Morse Taper connection) for limited crestal width
Deep threads
with cutting edges at the apex
WIDEST
IMPLANT TIP ABUTMENT PLATFORM BEVEL THREAD LENGTH
DIAMETER DIAMETER INFERFACE DIAMETER DIAMETER DIAMETER 18 mm
WIDEST THREAD
DIAMETER
BEVEL
DIAMETER
Ø 3,5 1,6 3,1 3,4 3,8 4,0 10 11,5 13 15 mm PLATFORM
DIAMETER
13 mm
11,5 mm
Ø 4,0 1,75 3,1 3,6 4,0 4,4 8,5 10 11,5 13
10 mm
IMPLANT LENGTH
8 mm
Ø 4,5 1,75 3,1 3,6 4,0 4,9 8,5 10 11,5 13 6 mm
0 mm
Ø 6,0 3,0 3,1 5,0 5,5 6,4 8,5 10 11,5 TIP
DIAMETER
IMPLANT
Note: all measurements in mm DIAMETER
Implants:
IM37100-0 JDIcon Plus Ø 3.5 L 10
IM37115-0 JDIcon Plus Ø 3.5 L 11.5
IM37130-0 JDIcon Plus Ø 3.5 L 13
Note: All the prosthetic components are the same as JDIcon Plus implant line
DRILLING PROTOCOLS
It is recommended to adhere to the indications of the following drilling sequence to ensure optimal primary stability of the implants.
JDentalCare, the JDentalCare logo and other trademarks mentioned in this document are, excluding specifically mentioned exceptions, trademarks property of JDentalCare.
The images of the products represented in this brochure are not necessarily to scale.
Note: Not all products manufactured by JDentalCare and represented in this brochure have been regulatory cleared/released for sale in all countries and/or have been licensed in accordance with FDA Rules and Regulations.
For more information about current product assortment and availability, please contact your local JDentalCare distributor. For prescription only.
Caution: Federal (US) law restricts this device to sale by or on the other for a licensed dentist.
See instructions for use for more information such as indications, warnings, precaution and contraindications. REV.03 of 2024-03-19