Professional Documents
Culture Documents
Brochure Electrolux w4250s
Brochure Electrolux w4250s
Washer extractors
W4250S
Features and benefits
• Clarus Control® with:
– Fully programmable microprocessor
– All relevant wash parameters can be programmed
– Programming from key pad or downloading via memory card
• Frequency-controlled motor with fixed wash and extraction
speeds ensures smooth action in the wash and extraction
sequence
• Good dewatering ability due to higher G-force compared with a
traditional solid mount machine
• Solid mount construction with robust frame in galvanized steel
• Extremely low water and energy consumption – see table below
• Four compartment soap box for manual dosing of powder or
liquid detergent
• Large door opening for easy loading/unloading
• Stainless and galvanized steel in all vital parts for high degree of
rust protection
• SuperBalanceTM guarantees the correct extraction force
Main options
• Stainless steel front panel
• Stainless steel side panel
Images shown are a representation of the product only and
• Dual drain valves for water re-use variations may occur.
8 7
Floor requirements
5281
Frequency of the dynamic force Hz 11.7
Front
Floor load at max extraction kN 3.8 ± 5.9
Sound levels
Sound pressure level* B
Wash dB(A) 70
Extraction dB(A) 88
Heat emission
% of installed power, max 5
Shipping data**
Weight net, kg 287
crated, kg 302
Shipping volume m3 1.51
Accessories
Water re-use tank (Clarus Control) x 5
B Depth 955
Right side
C Height 1410
D 470
E 990
F 1120
G 45
H 1330 O
I 160
K 1290 N L 3
L 245 I 2 9
G
M 1125
N 325 6
4
O 335
P 100 1
R 265
1 Electrical connection 6 Liquid supply connections
2 Cold water 7 Control panel H
3 Hot water 8 Soap box K
4 Steam connection 9 Connections for water re-use F M
5 Drain 10 Door opening ø 435 mm
Front and side panels in light grey with ”Blue Wave” on front panel (RAL 260 70 05, 250 60 30)
* A-weighted emmission sound pressure level at workingstations.
We reserve the right to alter specifications without notice.
Rear side
Art. No. 438919524EN/2020.08.18