Professional Documents
Culture Documents
10) Daftar Pustaka
10) Daftar Pustaka
Abdulmalek, F, A., & Rajgopal, J., (2007), Analyzing the benefits of lean
manufacturing and value stream mapping via simulation: A process
sector case study, Int. J. Production Economics 107 pp. 223–236
Adnan, M., (1984), Kimia dan Teknologi Pengolahan Air Susu. Andi Offset.
Yogyakarta
Alefari, M., Salonitis, K., and Xu, Y., (2017), The role of Leadership in
Implementing Lean Manufacturing. Manufacturing, Cranfield
University, Cranfield, MK43 0AL, UK.
Arikunto, S., (2010), Prosedur Penelitian Suatu Praktik, Rineka Cipta,
Bandung
Baby, B., Prasanth, N., and Jebadurai, D, S., (2018), Implementation of Lean
Principles to Improve The Operations of A Sales Warehouse in The
Manucaturing Industry. Department of Mechanical Engineering,
Kattankulathur Campus, SRM Institute of Science and Technology,
Kattankulathur 603203, Tamil Nadu, India.
Bhim, S., Garg, S, K., & Sharma, S, K., (2010), Value Stream Mapping:
Literature review and Implications for Indian Industry. Department of
Mechanical Engineering. Galgotias College of Engineering and
Technology. Greater Noida, UP, India.
Chen, L., & Meng, B., (2010), The Application of Value Stream Mapping
Based Lean Production System, International Journal of Business and
Management, Vol.5 No.6
Chris, A, O., (2008). Lessons from a Lean Consultant: Avoiding Lean
Implementation failures on the shop floor. Pearson Education Inc.
Danone, (2009), CUTE Handbook. Industrial Operations. Group
Danone.
Dighe, S, B., & Kakirde, A., (2014), Lean Manufacturing Implementation
Using Value Stream Mapping: A Case Study of Pumps Manufacturing
Company.Department of Mechanical Engineering. Indore.India.
Dixit, A., Dave, V., & Singh, A, P., (2015), Lean Manufacturing: An Approach
for Waste Elimination. Jodhpur Institute of Engineering and
Technology Jodhpur, India.
99
100
Gaspersz, V., (2007). Lean Six Siqma for Manufacturing and Service
Industries. Edisi 1. Gramedia Pusaka Utama. Jakarta.
Gasperz, V., & Fontana, A., (2011), Lean Six sigma for Manufacturing and
Service Industries. Bogor: Vinchristo Publication.
Goriwondo, W, N., Mhlanga, S., & Marecha, A., (2011), Use of The Value
Stream Mapping Tool for Waste Reduction in Manufacturing. Case
Study for Bread Manufacturing in Zimbabwe. Department of Industrial
and Manufacturing Engineering P.O. Box AC 939, Ascot, Bulawayo,
Zimbabwe.
Hartini, S., & Ciptomulyo, U., (2015), The relationship between lean and
sustainable manufacturing on performance: literature review.
Department of Industrial Engineering, Sepuluh Nopember Institute of
Technology, Surabaya 60111, Indonesia.
Hines & Taylor. (2000). Going Lean, Lean Enterprise Research Center.
Cardiff Business School
Http://www.kaizenworld.com/kaizen/value stream mapping.html
Http://www.leanmanufacturingtools.org,tanggal akses: 14 April 2019.
Http://www.sarihusada.co.id; tanggal akses 16 April 2019.
Hong, S, T., Ching, T, N., Jian, C, W., and Pin, C, K., (2016), Case Study on
Lean Manufacturing System Implementation in Batch Printing Industry
Malaysia. Department of Engineering, Universiti Putra Malaysia,
Malaysia.
Huang, Y., & Tomishuka, M., (2017), Production Flow Analysis Through
Environmental Value Stream Mapping: A Case Study of Cover Glass
Manufacturing Facility. Mechanical Systems Control Laboratory,
University of California, Berkeley, USA.
Jeong, B, K., & Yun, T, E., (2016) Improving IT Process Management
Through Value Stream Mapping Approach: A Case Study.
Metropolitan State University of Denver, Denver, CO, United States.
Liker, J, K., (2004), The Toyota Way: 14 Management Principles from the
World’s Greates Manufacturer. McGraw-Hill.
Lopes, R, B., Freitas, F., & Sousa, I., (2015), Application of Lean
Manufacturing Tools in the Food and Beverage Industries. Department
of Economics, Management and Industrial Engineering / CIDMA,
University of Aveiro, Portugal.
101
Sekaran, U., & Bougie, R., (2013), Research Methods for Business: A Skiil
Buillding Approach, Jhon Wiley and Sons Inc, London.
Shoeb, M., (2017), Implementation of Lean Manufacturing System for
Successful Production System in Manufacturing Industries.
Department of Mechanical Engineering, Jamia Millia Islamia New
Delhi, (India).
Sugiyono, (2013), Metode Penelitian Manajamen, Alfabeta, Bandung.
Sundar, R., Balajib, A, N., & Kumar, R, M, S., (2014), A Review on Lean
Manufacturing Implementation Techniques. Department of
Automobile K.L.N. college of Engg, pottaplayam-630611, Tamilnadu.
Venkataraman, K., Ramnath, B, V., Kumar, V, M., and Elanchezhian, C., (2014),
Application of Value Stream Mapping for Reduction of Cycle Time in a
Machining Process. Department of Mechanical Engineering.Chennai.
India.
Womack, J., & Jones, D., (1996), Lean Thinking: Banish Waste and and
Create Wealth in Your Corporation, Free Press. New York.