Professional Documents
Culture Documents
Procedure Install Injector Engine Sullair C4
Procedure Install Injector Engine Sullair C4
Installation Procedure
NOTICEPSP
202 0002-
Keep all parts clean from contaminants.
3
life.
23: / 0 B A
4 1 / 2 B 5
KE :54+ 4 2
N R 0
©2 624 8:00
0
Cat 3 C 2 9
e r
Con pilla terpi a
fide r: llar
ntia Inc
lG .
ree
Illustration 1
n g01320782
1. Ensure that the seat for the fuel injector in the cylinder head and the fuel injector is clean and free from damage.
2. On installing original fuel injector (1), install a new O-ring seal (5) and a sealing washer (6) to the fuel injector.
On a new fuel injector, ensure that O-ring seal (5) and sealing washer (6) are not damaged and are in place.
3. Position clamp (4) onto fuel injector (1). Install fuel injector (1) into the cylinder head.
Note: Alignment Pin (7) must be located opposite clamp (4).
6. Remove plugs from hose assemblies (2). Remove cap from fuel injector (1).
End By:
a. Install the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines - Install".
PSP-0002BAB5
2023/01/22
23:43:13+08:00
i02762568
© 2023 Caterpillar Inc.
Caterpillar:
Confidential Green