Professional Documents
Culture Documents
Quick Print
Quick Print
-------------------------------------------------------------------------------------------
Item : Unknown Doc No. : Unknown
Client : Portobello - RMF Engineering Ltd Page : 1
-------------------------------------------------------------------------------------------
Title : 3
Design data
===========
Units - N mm degrees C
Construction category - 1
Type - 2:1 Ellipsoidal head
Pressure input - Design pressure
Design pressure MPa 1.000
Design temp deg.C 0.000
Corrosion: int mm 0.000
Corrosion: ext mm 0.000
PED test pressure - No
Check test case - No
Material spec - SA240
Head data
=========
Diameter: OD-ID-NB - Internal
Inside diameter mm 500.000
New thickness mm 5.000
Tolerance - Absolute
Thinning mm 0.000
Straight flange - Yes
Straight flange length mm 20.000
-------------------------------------------------------------------------------------------
Finglow Software : PD 5500 02 May 24 By SA
Output data
===========
Material SG - 7.800
Head weight kg 11.705
Head volume m3 0.020
Test pressure pt: shop MPa 1.250
Test pressure pt: site MPa 1.250
Miscellaneous data
==================
Ratio p/f (xE3) - 3.788
Diameter D mm 510.000
Head height he mm 130.000
Ratio he/D - 0.255
Ratio e/D (xE3) - 2.381
Thickness e mm 1.214
Factor - 1.770
Mean dia Deff mm 901.607
Pres thk eps mm 0.854
Straight flange min reqd thk mm 0.949
Min length mm 25.249
Min reqd thk e mm 1.214
Thickness ea mm 5.000
Material data
=============
Material spec - SA240
Min tensile strength MPa 621.0
Yield: ATM MPa 448.0
Design strength: ATM MPa 264.0
Design strength: DT MPa 264.0
Source: PD5500 Table Du.2.3.2 S31803
Product form: Plate
Matl No: S31803
Group: 10.100
Warnings data
=============
Low temperature
Acceptable calculation
Warnings
-------------------------------------------------------------------------------------------
Finglow Software : PD 5500 02 May 24 By SA