Professional Documents
Culture Documents
Washing Machine IQ300 Instruction Manual
Washing Machine IQ300 Instruction Manual
Your washing machine Preparation Before washing for the first time
Wash once without any laundry –> page 9. Washing Removing the washing Individual settings Important information
Open the washing machine door and remove the washing.
Congratulations ä you have opted for a modern, high-quality
domestic appliance manufactured by Siemens. The washing
ʋ For domestic use only
ʋ For washing machine-washable fabrics and hand-wash-
Correct installation according to the
separate Installation instructions.
Sorting and loading laundry If (without final spin) is active: Turn the programme
selector to C Empty or select the spin speed. ʑ Spin speed in rpm/ without final spin –> model-dependent
Before and while the selected programme is running, the spin speed or (without final spin,
Protecting the laundry and the machine
– Empty pockets.
machine is distinguished by its economical water- and energy able wool in detergent solution Follow the manufacturer's care information. Select Start/Pause. – Look out for metal items (paperclips, etc.).
consumption. laundry soaks in the last rinsing water) can be set. The effects depend on the programme
ʋ To be operated with cold drinking water and commer- According to the information on the care labels. progress. – Wash delicates in a laundry bag (tights, curtains, underwired bras).
Each machine that leaves our factory has been inspected thoroughly cially available detergents and care products which are Check the machine According to type, colour, soiling and temperature.
Detergent drawer with
– Remove any foreign objects - risk of rusting.
The maximum selectable spin speed depends on the model and on which programme is – Fasten zips, do up any buttons.
to ensure that it functions properly and is in perfect condition. suitable for use in washing machines Do not exceed the maximum load –> page 7. – Leave the washing machine door and detergent
– Never use a damaged machine. compartments I, II, ~ drawer open so that any residual water can currently selected. – Brush sand out of pockets and collars.
.
ʑ
– Inform the after-sales service. Observe the important information –> page 6. – Remove curtain fittings or place in the laundry bag.
Further information: www.siemens-home.com – Do not leave children unattended near the Insert large and small items of laundry.
evaporate. Additional functions –> and overview of programmes, see page 7
Drum Laundry with varying degrees of soiling
washing machine. Close the washing machine door. Take care not to trap items of laundry Turning the tap off ispeedPerfect For washing in a shorter time with a washing outcome comparable to
– The washing machine is not to be used by Connect the mains plug between the washing machine door and the rubber seal. Control panel that of the standard programme. Maximum load –> Overview of Wash new items of clothing separately.
Environmentally friendly waste disposal children or persons not familiar with the programmes, page 7.
Make sure your hands are dry. Not required for Aqua-Stop models –> refer to installation light Do not prewash. If required, choose the additional function
All packaging must be disposed of in accordance with operating instructions. Add detergent and care products i speedPerfect.
Take hold of the plug only. Washing machine instructions j ecoPerfect For saving energy with a washing performance comparable to that of
environmental guidelines. – Keep pets away from the washing machine. the standard programme.
door Pretreat any stains as necessary.
This appliance is certified in accordance with European Directive Measure accordingly:
Amount of laundry, soiling, water hardness (ask your water supply
Switching off (Easy-iron) Special spin sequence with subsequent fluffing. More gentle final spin intense Do not load as much laundry.
2002/96/EEC on waste electrical and electronic equipment
(WEEE).
Turn the tap on company) and manufacturer's instructions. Turn the programme selector to Off. - residual moisture in the laundry slightly increased. Choose a programme with Prewash.
This directive provides the framework for the EU-wide collection and Pour liquid detergent into the appropriate dispenser and place in the drum. ?c(Aqua Plus) Increased water level and additional rinse cycle, extended washing Soaking Load laundry of the same colour
reuse of used appliances. time. For areas with very soft water or for further enhancing the spin Pour soaking agent/detergent into compartment II in accordance with the manufacturer's
result. instructions. Turn the programme selector to cCottons cold and select Start/Pause.
Compartment II: detergent for the main wash, water softener,
bleach, stain remover Dilute viscous fabric softener and fabric conditioner with water.
ʑ Start/Pause
For starting or interrupting the programme.
After approx. 10 minutes, press Start/Pause, to pause the programme. Once the required
soaking time has elapsed, press Start/Pause, again to continue the programme, or select
a different programme.
Contents Page Compartment ~c: fabric softener, starch
This prevents blockages.
ʑ Signal Starching Laundry must not be treated with fabric softener
ʋ Intended use .......................................................................................1 Compartment I: detergent for prewash 1000 1000
1. Activate the Starching is possible in all wash programmes if liquid starch is used. Pour starch into the
ʋ Programmes .......................................................................................1 setting mode for
900 900
fabric softener compartment in accordance with the manufacturer's instructions ~ (rinse first
800 800
ʋ Setting and adjusting the programme ...........................................3 Setting and adjusting a programme signal volume
(*model-dependent)
1 if necessary).
600 600
ʋ Washing ...........................................................................................3/4 ccc ccc
ʋ After washing ......................................................................................4 Programmes Additional functions and spin Programme has ended when... Dyeing/bleaching
ʋ Individual settings ..........................................................................5/6 Detailed overview of programmes –> page 7. speeds –> Individual settings,
... Start/Pause flashes and the b indicator light comes
Set to 1 step Press and + 1 step Release Dye should only be used in normal household quantities. Salt may damage stainless steel.
ʋ Important information ....................................................................... 6 The spin speed can be selected individually, irrespective of Programme selector Status Spin Additional Start/ page 5. Option: hold Always follow the dye manufacturer's instructions. Do not use the washing machine for
on.
ʋ Overview of programmes ................................................................7 the selected programme and programme progress. indicator speed* functions Pause bleaching clothes.
Visually *Short signal - function on.
ʋ Safety instructions .............................................................................8 direct
ʋ Consumption values .........................................................................8 cCottons Hard-wearing fabrics Interrupting the programme impaired mode*
ON-OFF
Long signal - function off.
ʋ Care .....................................................................................................9 + Prewash Hard-wearing fabrics, prewash at 30 °C Programmes at high temperatures:
ʋ Information on the indicator lights ..................................................9
ʋ Maintenance .................................................................................... 10
Mix Different types of laundry
3 – Cool washing: Select Rinse/ cSpin.
– Select Start/Pause. ON-OFF Set to
ʋ What to do if... .................................................................................. 11 @ Super 15’
2Rinse/ cSpin
Short programme
Laundry washed by hand,
Select Start/Pause 2 Programmes at lower temperatures:
– Rinse/ cSpin (deactivate ?c(Aqua Plus) button) or 2. Setting the
Button signals
1000
Information signals
1000
?c(Aqua Plus) button activated; select C Empty. 900 900
Service flap volume for... 800 800
if only using the spin cycle, deactivate – Select Start/Pause. 600 600
the button ccc
Protection of the environment/Conservation tips
– Always fill the washing machine with a maximum amount of C Empty Drain rinsing water for c(without final
laundry for the relevant programme. spin) Changing the programme, if ... 1 step Setting the 1 step Setting the Set to
– Wash normally soiled laundry without a prewash. Programme selector b End All buttons are sensitive and volume** volume**
/ ÿ Wool Hand/machine-washable wool for switching the need only to be touched ... you have selected the wrong programme by mistake:
– Instead of Cottons 90 °C, choose the programme Spin ** you may need to select the function several times.
Delicate/ Silk machine on and off lightly. – Reselect the programme.
Cottons 60 °C with the additional function j ecoPerfect. Delicate washable fabrics
and for selecting the Rinse If you press and hold the spin – Select Start/Pause. The new programme starts from
Comparable cleaning result with significantly lower energy I Easy-Care Easy-care fabrics programme. Can be
consumption. þ Wash speed button, the appliance the beginning.
– Measure the detergent according to the manufacturer's
turned in either
direction.
automatically cycles through
the setting options.
Washing
instructions and water hardness.
– If the laundry is then dried in the tumble dryer, select the spin
speed according to the instructions of the dryer manufacturer.
1 2 3 4 5 6
Carl-Wery-Str. 34
dry. Longer programme breaks (fabrics rest in the detergent solu-
with the washing machine and act accordingly. Do not load any laundry into the machine. Turn on the tap. Turn the programme selector to Off and disconnect the mains plug. – Tighten the screw connection of the supply hose.
ʑ
– Retain the documents for subsequent use. Add the following to compartment II: No water supply. – Start/Pause not selected?
1. Open and remove the service flap.
Risk of electric shock – Never pull the cable to disconnect the mains plug. – approx. 1 litre water Detergent not dispensed. – Tap not turned on?
different types of laundry can be washed together
– Never insert/disconnect the mains plug with damp hands. – detergent (dosage according to the manufacturer's instructions for light soiling and the – Filter blocked? Clean the filter –> page 10.
Programmes without prewash - add detergent to compartment II, programmes with prewash - distribute the detergent between compartments I and II.
the programme, turn the programme selector to Off. from the housing. Remove the container.
cannot be opened. – (without final spin) selected? –> page 3, 4.
Additional functions; information
– Sever the mains cable and discard along with the plug. Remove the sealing cap, allow the detergent solution to flow out.
Machine housing, control panel
– Destroy the lock on the washing machine door. This will prevent Replace the sealing cap and place the drainage hose in the retainer.
ʑ Programme does not – Start/Pause selected?
suitable for lightly soiled laundry
children from locking themselves in and risking their lives. – Wipe with a soft, damp cloth. start. – Washing machine door closed?
No spin between rinse cycles
ʑ
– Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners). 2* For models without a drainage hose: Carefully unscrew the pump cover until the
WM10E161HK ...
WM08E161HK
Danger of suffocation – Keep packaging, film and packaging parts out of the reach of Detergent solution is not – (without final spin) selected? –> page 3, 4.
– Remove detergent and cleaning agent residue immediately. detergent solution begins to flow out. When the service flap is half full, close the pump cover drained.
children. and empty the service flap. Repeat the above steps until all the detergent solution has – Clean the detergent solution pump –> page 10. Observe the safety
– Do not clean with a jet of water. – Clean the waste pipe and/or drainage hose. instructions on
Risk of poisoning – Keep detergents and care products out of the reach of children. completely drained out.
2Rinse/ cSpin, C Empty
page 8.
Risk of explosion – Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover/cleaning solvent may cause an
Cleaning the detergent drawer...
...if it contains detergent or fabric softener residues.
3. Carefully unscrew the pump cover (residual water).
ʑ Water not visible in the –
drum.
Not a fault - water below the visible area.
2. To remove the insert: press the insert upwards from below with your 4. Clean the interior, pump cover thread and pump housing (the impeller in the detergent Laundry wet/too damp. Distribute small and large items of laundry evenly inside the drum.
Risk of injury – The washing machine door can become very hot. finger. solution pump must rotate).
3. Clean the detergent dispenser tray and insert with water and a brush and – (Easy-iron) selected –> page 5.
Handä or machine-washable fabrics made of wool or
Hard-wearing fabrics, heat-resistant fabrics made of
– Be careful when draining hot detergent solution. 5. Replace the pump cover and screw it in place tightly.
dry it. – Too low a speed selected? –> page 5.
satin, synthetic fibres or blended fabrics (e.g. cur-
Easy-care fabrics made of cotton, linen, synthetic
– Do not climb onto the washing machine. 6. Place the service flap back on and close.
For delicate, washable fabrics, e.g. made of silk,
Drum Turn the programme selector to Off and disconnect the mains plug.
Consumption values washing machine. standard detergent.
fibres or blended fabrics
ʑ
Leave the washing machine door open so that the drum can dry out. 1. Loosen the hose clamp, carefully remove the drainage hose (residual water). þü(Wash) display lamp – Too much detergent used? Mix 1 tablespoon of fabric softener
Rust stains - use chlorine-free cleaning agent, not steel wool.
0811 / 9000697726
Electricity con- Programme 2. Clean the drainage hose and siphon connecting piece. flashes. Foam may with ½ litre of water and pour into dispenser II (not for outdoor
Programme Additional function Load Water**
sumption** duration** 3. Reattach the drainage hose and secure the connection with the hose clamp. be coming out of the and down-filled textiles!).
Type of laundry
detergent drawer. – Reduce the detergent dosage for the next wash cycle.
cCottons 40 °C 7 kg 0.69 kWh 60 l 2:36 h Descale the appliance according to the descaler manufacturer's instructions. This should not Filter in the water supply
ʑ Intense noise formation, – Are the appliance feet fixed?
Overview of programmes
cCottons 60 °C 7 kg 1.33 kWh 60 l 2:39 h be necessary if the correct dosage of detergent is used. Risk of electric shock. vibrations and “walking” Secure the appliance feet –> Installation instructions.
tains)
Do not immerse the HydroSafe safety device in water (contains an electric valve).
cCottons 60 ºC jecoPerfect* 7 kg 1.05 kWh 51 l 3:08 h during the spin cycle. – Transportation safety devices removed?
* Reduced load for additional i speedPerfect function
machine
3 kg
2 kg
I Easy-Care 40 °C A signal sounds and indicator lights for the spin speed flash:
ʑ
max.
3 kg 0.55 kWh 55 l 1:37 h 1. Turn off the tap. Noises during spin and – Clean detergent-solution pump –> page 10.
Mix 40 °C 3 kg 0.48 kWh 32 l 1:03 h ¤ Close the washing ¤ Detergent solution pump ¤ Open the tap completely, 2. Select any programme (except for 2Rinse/ cSpin// C Empty). drain cycles.
¤ machine door properly; ¤ blocked; Clean the
ʑ
supply hose kinked or
cold, 40, 60, 90 °C
¤ 3. Select Start/Pause. Let the programme run for approximately 40 seconds. The indicator lights do – Power cut?
/ ÿ Wool cold 2 kg 0.10 kWh 39 l 0:40 h laundry may be caught. detergent solution pump trapped;
¤ ¤ –> page 10. ¤ 4. Turn the programme selector to Off. Disconnect the mains plug. not function during – Fuses tripped? Reset/change the fuse. Instruction manual en
cold, 40, 60 °C
30 °C
40 °C
hose at the siphon Disconnect the hose from the tap. longer than usual. imbalance by repeatedly distributing the laundry.
cold
ture, type and amount of washing and degree of soiling, utillised detergent, fluctuations in the mains voltage and selected additional –> page 10. – Not a fault - foam detection system active - adds an additional
°C
Remove the hose on the rear of the appliance, instructions before operating the washing machine.
I Easy-Care
@ Super 15’
programmes
Programmes
/ ÿ Wool
Additional
7 8 9 10 11
1 2
3 4
ON-OFF Set to
Button signals Information signals
2. Setting the 1000 1000
900 900
volume for... 800 800
600 600
ccc
5 6
Carl-Wery-Str. 34
dry. Longer programme breaks (fabrics rest in the detergent solu-
– Read the instruction manual and installation instructions and all other information enclosed
–> refer to the table of consumption values on page 8 and notes on page 6.
– Sever the mains cable and discard along with the plug.
– Destroy the lock on the washing machine door. This will prevent
suitable for lightly soiled laundry
WM10E161HK ...
WM08E161HK
Danger of suffocation – Keep packaging, film and packaging parts out of the reach of
children.
Risk of poisoning – Keep detergents and care products out of the reach of children.
2Rinse/ cSpin, C Empty
Risk of injury – The washing machine door can become very hot.
Handä or machine-washable fabrics made of wool or
Hard-wearing fabrics, heat-resistant fabrics made of
Consumption values
fibres or blended fabrics
0811 / 9000697726
containing wool
cotton or linen
3 kg
2 kg
I Easy-Care 40 °C
max.
* Programme setting with maximum spin speed for testing according to or in accordance with IEC 60 456.
** The values deviate from the indicated values depending on water pressure, water hardness, water inlet temperature, room tempera-
30 °C
40 °C
40 °C
cold
ture, type and amount of washing and degree of soiling, utillised detergent, fluctuations in the mains voltage and selected additional
°C
functions.
Delicate/Silk
I Easy-Care
+ Prewash
cCottons
@ Super 15’
programmes
Programmes
Mix
/ ÿ Wool
Additional
7 8
9 10
ʑ No water supply.
Detergent not dispensed. –
– Start/Pause not selected?
Tap not turned on?
– Filter blocked? Clean the filter –> page 10.
– Supply hose kinked or trapped?
ʑ Unsatisfactory spin
result.
– Not a fault - the unbalanced-load detection system has cancelled
the spin cycle because of uneven distribution of the laundry.
Laundry wet/too damp. Distribute small and large items of laundry evenly inside the drum.
– (Easy-iron) selected –> page 5.
– Too low a speed selected? –> page 5.
ʑ Programme sequence
longer than usual.
– Not a fault - unbalanced load detection system adjusts
imbalance by repeatedly distributing the laundry.
– Not a fault - foam detection system active - adds an additional
rinse cycle.
ʑ Detergent residues on
the laundry.
– Occasionally, phosphate-free detergents contain water-insoluble
residues. Read these instructions and the separate installation
instructions before operating the washing machine.
– Select Rinse/ cSpin or brush out the laundry after washing.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
– Turn the programme selector to Off and remove the mains plug from the socket.
– Turn off the water supply and call the after-sales service –> Installation instructions.
11