Professional Documents
Culture Documents
Nitoflor Conductive
Nitoflor Conductive
Uses Properties
Nitoflor Conductive is suitable for use in areas where a static The test results below were determined on laboratory
conductive floor with a resistance between 5x104 and 1x106 specimens and may vary from those obtained under site
ohms is required as a measure to control static electricity, conditions.
such as:
Electrical Properties
Electronic manufacture and assembly Surface resistance : 5x104 to 1x106 ohms
hospital operation theatre (ASTM F150-78)
Bulk resistance
hazardous dust and chemical environments
(DIN 51953) : 5x104 to 1x106 ohms
clean rooms etc. (ASTM F150-78) 5x104 to 1x106 ohms
Charge decay
Advantages (Fed. Spec. 101C : 5000v to zero in less than
Method 4046) 0.1 seconds
Static control - provides static electricity with an effective Body voltage decay : 5000v to zero in 0.4
passage to earth. (Stephen Halperin seconds using conductive
& Associate Ltd.) heel straps or shoes.
Seamless - smooth, hygienic surface which is easily
cleaned, unlike vinyl tiles which are not seamless. Physical properties
Compressive strength
Durable - long term performance, accepts fork lift traffic,
(BS6319) : 60 N/mm²
more durable than vinyl tiles.
Flexural strength
Attractive - wide range of colours enhances working (BS6319) : 40 N/mm²
environment. Tensile strength
Resists most chemical spillage. (BS6319) : 18 N/mm²
Abrasion resistance
Fed. Spec. 141A (CS17
Description
wheel,1000g, 1000cycles) : 97mg weight loss
Nitoflor Conductive is a 2mm thick epoxy resin floor topping Impact resistance
with controlled conductive properties. (BS8204 Pt.1) : 0.2mm indentation
Cure time 20°C 35°C
The system comprises an epoxy primer, conductive epoxy Foot traffic 24 hours 18 hours
undercoat and a 2mm thick epoxy top coat. It is available in Vehicular traffic 48 hours 36 hours
a wide range of attractive colours and provides a highly Reaction to fire : Class B
durable, chemically resistant seamless floor. (ASTM E84/UL723)
(for Flame Spread Index(FSI) and Smoke Development
Technical support Index(SDI))
Fosroc offers a comprehensive technical support service to Chemical properties
specifiers, end users and contractors. It is also able to offer
Nitoflor Conductive provides excellent resistance to a wide
on-site technical assistance, an AutoCAD facility and
range of industrial chemicals.
dedicated specification assistance in locations all over the
world.
Design Criteria
Specification Nitoflor Conductive is designed for application at a nominal
thickness of 2mm. It should be installed where a static
The designated floor areas shall be surfaced with Nitoflor
conductive floor with resistance between 5x104 and 1x106
Conductive, a 2mm thick flow-applied epoxy resin floor
ohms is required.
topping. The topping shall provide a surface and bulk
resistance between 5x104 and 1x106 ohms when tested to Nitoflor Conductive is designed to dissipate static electricity
DIN 51953 and ASTM F150-78 respectively. away from the source to earth.
Nitoflor Conductive
Coverage/Yield
Nitoflor Conductive : 7 to 7.5m² / 15 litre
Nitoflor Conductive U/C : 15-20m²/ 4.5 litre * Denotes the trademark of Fosroc International Limited
Nitoprime 31 : 4-5m²/litre †
See separate data sheet
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the Supply of
Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the user’s responsibility to obtain the latest version.
Head Office
telephone: (+9714) 2039699 fax: (+9714) 2859649 email: agf@fosroc.com
Al Gurg Fosroc Co. LLC
Regional offices
Post Box 657, Dubai Abu Dhabi, Al Gurg Fosroc telephone: 673 1779 fax: 673 1449 email: abudhabi@fosroc.com
Bahrain, YBA Kanoo telephone: 17738200 fax: 17732828 email: bahrain@fosroc.com
United Arab Emirates
Kuwait, Boodai telephone: 4817618 fax: 4832124 email: kuwait@fosroc.com
www.fosroc.com Oman, Al Amana telephone: 24815080 fax: 24817554 email: oman@fosroc.com
UAE/0443/21/E