Professional Documents
Culture Documents
Ecertificate 2310300554
Ecertificate 2310300554
Page N°: 1/ 3
INSPECTION REPORT
In pursuance to an order for inspection given to us by our:
PRINCIPAL : BITUMEN HORMOZ PARS
GOOD DESCRIPTION : BITUMEN GRADE PG 70-10
(AS PROVIDED BY PRINCIPAL)
AT : ARYA SALAR WAREHOUSE -SHAHID RAJAEE PORT
ON : COMPLEX- BANDAR ABBAS- IRAN
OCTOBER 12TH 2023 TILL OCTOBER 12TH 2023
REQUIRED INSPECTION : TO REPORT PACKING & MARKING, RANDOM SAMPLING OF
THE CARGO, SENDING SAMPLE TO NON SGS LAB, STUFFING
SUPERVISION
We hereby report the followings:
Marking:
Following markings were observed on the body&/or top of drums, randomly inspected:
ALS
Premium Bitumen
Grade PG 70-10
ASIA
Packing:
The commodity was poured in the black appearance steel drums. Each drum has a lid on the top side.
Amongst the dimension checking of drums following figures were obtained:
This document is issued by the Company subject to its General Conditions of Service
Sampling:
Sampling was performed during stuffing the cargo into containers at warehouse, (The number of selected
drums:7 according to ASTM D140M–09, Standard Practice for Sampling Bituminous Materials).
Due to presenting cargo already packed in drums at the time of inspection, we’ve been restricted to take
the increments from top level of drums only.
All drawn samples were mixed well, and 4x1 L. Composite samples were prepared; distributed as follows:
-1x1 L. composite sample was dispatched to non SGS lab seal No.834813
-3x1 L. composite samples were retained by SGS for 90 days with SGS seal Nos.834814, 834815, 834816
& 834817
Analysis:
One composite sample was sent to non-SGS laboratory for the following items to be tested. The following
specification and test method were reported by the lab:
REQUIRED RANGE
DECLARED BY
SPECIFICATION TEST METHOD RESULT PRINCIPAL
MIN. MAX.
FLASH POINT, °C ASTMD92 292 230 --
VISCOSITY @135°C .PA.S ASTMD4402 0.54 -- 3
G*/SIN σ (ORGINAL BINDER) @70°C,KPA ASTMD7175 1.13 1 --
G*/SIN σ (RTFOT) @70°C,KPA ASTMD7175 2.86 2.20 --
ROLLING THIN FILM OVEN TEST, % ASTMD2872 <1 -- ±1
DSR (PAV) @28°C, KPA ASTMD7175 4228 -- 5000
M.VALUE @0°C, (BBR) ASTMD6648 0.31 0.300 --
GREEP STIFFNESS, S, 0°C MPA,(BBR) ASTMD6648 100.2 -- 300
These findings are reported herein for convenience only and SGS has no liability for the subcontracted
results which remain with the lab.
Stuffed containers:
The commodity was stuffed into 2 x 20 Ft. containers under our supervision as following:
No. Container No. QTY. of drums SGS seal Stuffing date
1 FSCU 323297-1 110 Drums C891919 12.10.2023
2 BSIU 329227-0 110 Drums C891920 12.10.2023
The sole function of any seals applied by SGS is to indicate that the material bearing such seals has been
inspected by SGS.
Seals applied by SGS are not intended to secure material, lock the container of such material, or otherwise
provide any security function. SGS does not provide security services and disclaims any liability in this
respect.
This document is issued by the Company subject to its General Conditions of Service
Quantity:
Total stuffed containers : 2 Containers
Total Number of drums : 220 Drums
Note:
-The floor of nominated empty containers was covered by a layer of P-E sheet.
-About 5 ~ 10 % of drums suffered from slight dents on bodies during stuffing operation. (This due to the
loading method performed by the manpower and machine/forklift, which the drums were in the sound
condition in an appearance before stuffing into containers).
SGS Tehran, October 23RD., 2023
23-08340L02,
(MT)
This document is issued by the Company subject to its General Conditions of Service