Professional Documents
Culture Documents
Cambium PTP 820C 820S PoE Injector Installation Instructions
Cambium PTP 820C 820S PoE Injector Installation Instructions
Cambium PTP 820C 820S PoE Injector Installation Instructions
User Documentation
Installation and operation of the PTP 820 family of PTP links is described in the associated
Technical Descriptions and Installation Guides available for download from:
http://support.cambiumnetworks.com
Download and read the appropriate Technical Description and Installation Guide before deploying
the PoE Injector.
EU declaration of conformity
Hereby, Cambium Networks declares that the PoE Injector is an ancillary product that complies
with the essential requirements and other relevant provisions of Directive 1999/5/EC. The
declaration of conformity may be consulted at:
http://www.cambiumnetworks.com/support/ec-doc
2 Place the cable lug (supplied with the PoE injector kit) between the plain and serrated washers.
2 Connect the cable to the gland assembled with the PoE Injector.
Procedure
Mount the PoE Injector to a wall and tighten using two M6 bolts and anchors supplied with the PoE
Injector.
Caution
For the warranty to be honored, you must install the unit in accordance with the
instructions above.