Professional Documents
Culture Documents
Quantities For Bridge
Quantities For Bridge
Note:
Haulage will not be paid on any item in this Bill and shall be deemed
to be included in the rates and prices entered herein.
31.01(c) Clear from shoulders and drains vegetation and debris, including m2 -
siltation on carriageway, for depth of clearing not exceeding 0.5m.
35.01(b) Fill from borrow in natural gravel material and compact to at least m3 -
93% MDD at AASHTO T.180 compaction, for benching works.
37.02(b) Provide approved gravel material G30, transport, spread, shape and m3 -
compact to 95% MDD at AASHTO T.180 compaction, to form
subbase layer.
38.01 E.O. Item 37.01 for processing and mixing in of lime stabilization m3 -
agent to the road base layer and shoulders at the nominal rate of
3% - 5% by weight of material, as shown on the drawings.
Page 1
The El Niño Emergency Road Repairs Project - Component C:
Payment
Descr iption Unit Quantity Rate Amount (UGS.)
Item
Note:
For the following items 14.01 and 14.03,
Tenderers are free to price for either the cost
of renting or constructing suitable approved
accommodation.
Rates for construction shall be for the full
inclusive cost of complying with the details
shown on the drawings and as described in
the Specifications for Office and Housing as
appropriate.
Ownership of constructed buildings ,
furniture and equipment shall revert to the
contractor.
All rental accommodation, which should be
to a similar standard and equipped and
furnished as for constructed accommodation,
shall be subject to the approval of the Project
Manager.
Tenderers should indicate whether the rate
inserted is for construction or rental by
circling and/or deleting as appropriate
against each item.
Page 2
The El Niño Emergency Road Repairs Project - Component C:
Page 3
Dimension Members Area (m2) unit
Description
width/ diameter
Length (m) (m) Height (m)
6000 STRUCTURES
(b) Extra Over Item 61.02 (a) for excavation in 'Hard' material
irrespective of depth (Provisional)
Abutment
Pier
Total -
(b) Crushed Stone for aburtment foundation 12.12 8.00 0.40 2 193.92 77.57
Crushed Stone for pile foundation 12.12 7.50 0.40 2 181.8 72.72
(c ) Basal ground reinforcement - NeoWeb Geocells ( 100mm) -
(d) Biaxial geogrid for base improvement -
(b) Class 30/20 for fill, pile caps, piers, abutments, approach slab and return walls
Abutment Footing 10.120 8.000 1.200 2 194.30
Slantng 10.500 0.250 2.100 2 11.03
Approach slab receiver 10.120 3.000 0.250 2 15.18
Abutment Cheek wall 10.120 0.750 1.000 4 30.36
return wall 6.000 0.750 9.800 4 176.40
66.06 a) Form 25mm expansion joint at each abutment as shown on the drawings. Fill with water resistant preformed compressible joint filler.
20.240
66.08 (a) Sealing of joints with 25mm wide by 50mm deep cold-poured polysulphide sealant
20.240
66.21 (b) Provide weep holes dia 75 mm in concrete walls for abutments and wing walls as specified
20
66.23 Provide Filter fabric Terram T1000 or equal or similar approved
Abutment back 16.12 4.5 2 145.1
Foundation Improvement 56.48 31 4 7003.5
Total 7506.0
66.23 Porous filter material behind abutments and wing walls as specicified.
Abutment back 16.12 0.3 4.5 2 43.52
Total 46.00
69.03 Waterproofing to structures:-Provide two coats of bituminous paint or Xypex concentrate as approved
Abutment Footing 32.24 1.00 2 64.48
Abutment Wall Rear Face 20.24 9.00 2 364.32
Abutment Wall Front Face 20.24 9.00 2 364.32
Abutment Wingwall Rear 20.24 4.50 4 364.32
Abutment Wingwall Rear 20.24 4.50 4 364.32
Abutment Wingwall front 20.24 4.50 4 364.32
Pier Footing 56.24 1.00 2 112.48
Pier Wall 28.34 9.00 2 510.12
2885.00
Move and set-up piling rig (CFA) at each pile position in a vertical
direction.
width/ diameter
Length (m) (m) Height (m)
6000 STRUCTURES
(b) Crushed Stone for aburtment foundation 12.12 8.00 0.40 2 193.92 77.57
Crushed Stone for pile foundation 12.12 7.50 0.40 2 181.8 72.72
(c ) Basal ground reinforcement - NeoWeb Geocells ( 100mm) -
(d) Biaxial geogrid for base improvement -
(b) Class 30/20 for fill, pile caps, piers, abutments, approach slab and return walls
Abutment Footing 10.120 8.000 1.200 2 194.30
Slantng 10.500 0.250 2.100 2 11.03
Approach slab receiver 10.120 3.000 0.250 2 15.18
Abutment Cheek wall 10.120 0.750 1.000 4 30.36
return wall 6.000 0.750 9.800 4 176.40
66.06 a) Form 25mm expansion joint at each abutment as shown on the drawings. Fill with water resistant preformed compressible joint filler.
20.240
66.08 (a) Sealing of joints with 25mm wide by 50mm deep cold-poured polysulphide sealant
20.240
66.21 (b) Provide weep holes dia 75 mm in concrete walls for abutments and wing walls as specified
20
66.23 Provide Filter fabric Terram T1000 or equal or similar approved
Abutment back 16.12 4.5 2 145.1
Foundation Improvement 56.48 31 4 7003.5
Total 7506.0
66.23 Porous filter material behind abutments and wing walls as specicified.
Abutment back 16.12 0.3 4.5 2 43.52
Total 46.00
69.03 Waterproofing to structures:-Provide two coats of bituminous paint or Xypex concentrate as approved
Abutment Footing 32.24 1.00 2 64.48
Abutment Wall Rear Face 20.24 9.00 2 364.32
Abutment Wall Front Face 20.24 9.00 2 364.32
Abutment Wingwall Rear 20.24 4.50 4 364.32
Abutment Wingwall Rear 20.24 4.50 4 364.32
Abutment Wingwall front 20.24 4.50 4 364.32
Pier Footing 56.24 1.00 1 56.24
Pier Wall 28.34 9.00 1 255.06
2527.00
Move and set-up piling rig (CFA) at each pile position in a vertical
direction.
width/ diameter
Length (m) (m) Height (m)
6000 STRUCTURES
(b) Crushed Stone for aburtment foundation 12.12 8.00 0.40 2 193.92 77.57
Crushed Stone for pile foundation 12.12 7.50 0.40 2 181.8 72.72
Basal ground reinforcement - NeoWeb Geocells ( 100mm)
(c )
-
(d) Biaxial geogrid for base improvement -
(b) Class 30/20 for fill, pile caps, piers, abutments, approach slab and return walls
Abutment Footing 10.120 8.000 1.200 2 194.30
Slantng 10.500 0.250 2.100 2 11.03
Approach slab receiver 10.120 3.000 0.250 2 15.18
Abutment Cheek wall 10.120 0.750 1.000 4 30.36
return wall 6.000 0.750 9.800 4 176.40
66.06 a) Form 25mm expansion joint at each abutment as shown on the drawings. Fill with water resistant preformed compressible joint filler.
20.240
66.08 (a) Sealing of joints with 25mm wide by 50mm deep cold-poured polysulphide sealant
20.240
66.21 (b) Provide weep holes dia 75 mm in concrete walls for abutments and wing walls as specified
20
66.23 Provide Filter fabric Terram T1000 or equal or similar approved
Abutment back 16.12 4.5 2 145.1
Foundation Improvement 56.48 31 2 3501.8
Total 3829.0
66.23 Porous filter material behind abutments and wing walls as specicified.
Abutment back 16.12 0.3 4.5 2 43.52
Total 46.00
69.03 Waterproofing to structures:-Provide two coats of bituminous paint or Xypex concentrate as approved
Abutment Footing 32.24 1.00 2 64.48
Abutment Wall Rear Face 20.24 9.00 2 364.32
Abutment Wall Front Face 20.24 9.00 2 364.32
Abutment Wingwall Rear 20.24 4.50 4 364.32
Abutment Wingwall Rear 20.24 4.50 4 364.32
Abutment Wingwall front 20.24 4.50 4 364.32
Pier Footing 0.00
Pier Wall 0.00
2169.00
Move and set-up piling rig (CFA) at each pile position in a vertical
direction.
width/ diameter
Length (m) (m) Height (m)
6000 STRUCTURES
(b) Crushed Stone for aburtment foundation 12.12 8.00 0.40 2 193.92 77.57
Crushed Stone for pile foundation 12.12 7.50 0.40 2 181.8 72.72
(c ) Basal ground reinforcement - NeoWeb Geocells ( 100mm) -
(d) Biaxial geogrid for base improvement -
(b) Class 30/20 for fill, pile caps, piers, abutments, approach slab and return walls
Abutment Footing 10.120 8.000 1.200 2 194.30
Slantng 10.500 0.250 2.100 2 11.03
Approach slab receiver 10.120 3.000 0.250 2 15.18
Abutment Cheek wall 10.120 0.750 1.000 4 30.36
return wall 6.000 0.750 9.800 4 176.40
66.06 a) Form 25mm expansion joint at each abutment as shown on the drawings. Fill with water resistant preformed compressible joint filler.
20.240
66.08 (a) Sealing of joints with 25mm wide by 50mm deep cold-poured polysulphide sealant
20.240
66.21 (b) Provide weep holes dia 75 mm in concrete walls for abutments and wing walls as specified
20
66.23 Provide Filter fabric Terram T1000 or equal or similar approved
Abutment back 16.12 4.5 2 145.1
Foundation Improvement 56.48 31 2 3501.8
Total 3829.0
66.23 Porous filter material behind abutments and wing walls as specicified.
Abutment back 16.12 0.3 4.5 2 43.52
Total 46.00
69.03 Waterproofing to structures:-Provide two coats of bituminous paint or Xypex concentrate as approved
Abutment Footing 32.24 1.00 2 64.48
Abutment Wall Rear Face 20.24 9.00 2 364.32
Abutment Wall Front Face 20.24 9.00 2 364.32
Abutment Wingwall Rear 20.24 4.50 4 364.32
Abutment Wingwall Rear 20.24 4.50 4 364.32
Abutment Wingwall front 20.24 4.50 4 364.32
Pier Footing 0.00
Pier Wall 0.00
2169.00
Move and set-up piling rig (CFA) at each pile position in a vertical
direction.