Professional Documents
Culture Documents
Fixapoutre Eng 2019
Fixapoutre Eng 2019
FIXAPOUTRE
I PERSONNEL LIFTING I Attachment
PRODUCT OF FRANCE
MANUFACTURED IN FRANCE
CONVENIENCE
FIXAPOUTRE counterweight suspension beams (or
No working height limit
attachment plate) consist of steel tubes that fit into
Adapts to any type of work site (adjustable)
each other in order to adjust the distance between
Fully dismountable the supports and the overhang (reach).
Custom designs available based on specifications
jointly defined with the design department Suspension beams are modular: they can be
equipped with a bracing system, supports can be
extended to be installed over obstacles such as a
MODULARITY parapet wall or ventilation duct.
Wheel on option for FIXAPOUTRE 4.S et 5.S : height under beam = 1260 mm / Weight = 15 kg
FIXAPOUTRE
I PERSONNEL LIFTING I Attachment
PRODUCT OF FRANCE
MANUFACTURED IN FRANCE
PRODUCT FEATURES
Weight (without
Description Position Height under beam Maximum load Maximum torque
counterweight) kg
FIXAPOUTRE
120 MM 500 kg to 1.10 m 99 550 m.kg
2.S
500 kg to 2.00 m
FIXAPOUTRE
120 MM 600 kg to 1.60 m 117 1000 m.kg
3.S
800 kg to 1.10 m
500 kg to 2.00 m
FIXAPOUTRE
1020 MM 600 kg to 1.60 m 136 1000 m.kg
5.S
800 kg to 1.10 m
- It is always best to reduce the rear load by lengthening the beam as much as possible to
minimise the overhang.
- Check that the roof and the suspension beams are able of supporting the loads.
- If necessary, check the permissible loads with the project manager.
- The roof covering must always be protected by means of boards, planks or metal sec-
tions.
- The counter-load must be made using FIXATOR counterweights. To determine the counter-
8 rue du Bois Rinier - P.A. - BP 10041 load value, check the label that is placed on the front element or the manual.
49181 St-Barthélemy-d’Anjou Cedex
FRANCE - Adjust the spacing of the beams to that of the clamps on the platform.
T. : + 33 (0) 241 311 700 - Only hang the platform once the metal beam is fully installed and properly counter-
Fax : + 33 (0) 241 311 705
loaded.
Email : info@fixator.com
- After assembly and before use, it is essential to test the installation in accordance with
www.fixator.com
the regulations in force. Before use, check that the brakes on each wheel are correctly
fastened and that the brace is tightened.
- Conduct regular inspections of the condition of the various elements.