Professional Documents
Culture Documents
Cad L1
Cad L1
Exercise no. 1
-------------------------------------------------------------------------------------------------------------------------------
This lab reinforces the following skills:
• Introducing: New part
• Sketching
• Inference Lines (Automatic relations)
• Dimensions
• Extrude
-------------------------------------------------------------------------------------------------------------------------------
Create this part using the information and dimensions provided. Sketch and extrude profile to
create this part. Units: millimetres.
1. New part.
Create a new part using part_CAD template.
2. Sketch
Create this sketch on the Front Plane using lines, automatic relations and dimensions.
3. Extrude
Extrude the sketch 80 mm in depth.
3. Extrude
Extrude the sketch 140 mm in depth.
3. Extrude
Extrude the sketch 10 mm in depth.
3. Extrude
Extrude the sketch 200 mm in depth.
3. Extrude
Extrude the sketch 24 mm in depth.
3. Dimensions
Add dimensions to fully define the sketch.
4. Extrude
Extrude the sketch 17 mm in depth.
3. Extrude
Extrude the sketch 62 mm in depth.