Professional Documents
Culture Documents
DIRT BIKE Wooden Toy Plans
DIRT BIKE Wooden Toy Plans
Wide : 90 mm
High : 130 mm
Long : 240 mm
DIRT BIKE
Ready to print PDF
It’s all quick and easy to make
A4
Build it using common tools and Sheet
easy materials to find.
WARNING
COPYRIGHT INFORMATION
Plans and pa erns in this Package For personal use only, the content owner gives non-exclusive buyer permission
to view, download and copy content. buyers must comply with the content owner rules. The content owner has
exclusive rights to the content that is owned in the present and in the future.
1. Use of content for commercial purposes is prohibited, content cannot be resold, re-licensed or sub-licensed,
leased and mass produced.
2. Distribu ng or sharing content for any reason is prohibited. Sharing of content is only permi ed via the official
website link of the content owner h ps://kayunganjuk.com
3. The reuse of content in the form of photo or video files is permi ed by giving credit to the content owner at
h ps://kayunganjuk.com
Notes to Readers:
Due to individual condi ons, tools and skills, we are not responsible for any damage, injury suffered, or loss that
occurs as a result of following the informa on published in this set of plans. Before star ng any instruc ons
carefully review the project. If you have any doubts or ques ons, please con nue to consult with local experts or
authori es.
CONTENT
Cover ....................................................................... 1
Front View
Rear View
For personal use only 3 https://kayunganjuk.com
View
Top View
Bo om View
For personal use only 4 https://kayunganjuk.com
View
Rigth View
Le View
For personal use only 5 https://kayunganjuk.com
Exploded View
4b
4a
4c
3a
4d 3c
3a 3c
3b
9a
9c
2c
9d 9b
2b 7a
7b
2e
7c
2a
2d
1c
1a
5b
1b
5a 2c
9e 2a
5b
8a
2e
2b
2d
6a
6b 8b
6c
IMPORTANT NOTE
1. Before cu ng the material, cover the surface with masking tape or vinyl s ckers, this is to make it easier to s ck
or remove the cut pa ern on the material without leaving glue marks on the material.
2. Make sure the thickness of the material is in accordance with the instruc ons on the cu ng pa ern that we set,
this will greatly affect the construc on and other parts during assembly.
3. Assemble each part using wood glue or PVA glue on the wide part, use a clamp for maximum results, use super
glue or all-purpose liquid glue in small parts.
ALTERNATE DOWELS
In general, we use 5mm diameter food chops cks as a dowel on the wheel and a 3mm diameter toothpick as the
steering wheel.
1c
1a
1b
9c
9d
Step 1 Step 2
Combine parts 1a, 9c and 9d into one sec ons, (see picture). Combine parts 1b and 1c into one sec ons, use wood glue / PVA
glue (see picture) clamp and wait for dry.
2a
2a
2a
2a
Step 3 Step 4
Sanding parts 2a (see picture). Combine parts 2a into one sec ons, use wood glue / PVA glue
(see picture) clamp and wait for dry.
2c
2b
2e
2e
2c
2d
2d
2b
Step 5 Step 6
Combine parts 2b and 2c into one sec ons, use super glue / CA Combine parts 2e and 2d into one sec ons, use super glue / CA
glue (see picture) glue (see picture)
9a
3a
3b
3c
3a
3c
Step 7 Step 8
Combine parts 9a, 3a and 3b into one sec ons, (see picture). Combine parts 3c into one sec ons, use super glue / CA glue
(see picture)
5b
5a
5b
Step 9 Step 10
Combine parts into one sec ons, use super glue / CA glue (see Combine parts 5a and 5b into one sec ons, use super glue / CA
picture) glue (see picture)
4b
4a
4c
4d
Step 11 Step 12
Combine parts into one sec ons, use super glue / CA glue (see Combine parts 4a, 4b and 4c, 4d into one sec ons, use super
picture) glue / CA glue (see picture)
6a
6b
Step 13 6c Step 14
Combine parts 6a, 6b, 6c and 7a, 7b, 7c into one sec ons, use Combine parts into one sec ons, (see picture)
super glue / CA glue (see picture)
9b
9e
Step 15 Step 16
Combine parts 9b and 9e into one sec ons, (see picture) Drill diameter 5mm depth 10mm, (see picture)
8a
8b
Step 17 Step 18
Combine parts into one sec ons, (see picture) Done, good job.
IMPORTANT NOTE
1. Print the cut pa erns that we have set, make sure the print size of the printer is accurate, print as original
documents and do not use a scale, measure the print on each cut pa ern with a ruler, if the size does not match
then adjust the printer se ngs.
2. Use paper glue and paste print cut pa erns on the material according to the thickness we have set, cut follow
the black outline and remove the white area.
2b 2b
4c
2c 2c
4d
2e 2e
4b
5a
material
thick 15mm
hole dia 2mm
2d 2d
3a 3a
dowel dia 2mm
9a
9b
hole dia 2mm 3c
9c
9d
3c hole dia 2mm
9e
1a
1b
1c
6a 7a
6c 7c
8b
material thick 15mm
hole dia 5mm
We are basically ordinary human beings, have the wrong nature and forget.
If you find any errors in this plan set, Please forgive and remind us.
Your cri cisms and sugges ons mean a lot to us, so that we can develop and get be er in the future.
Posi ve benefits to the world community.
Contact us
Email : support@kayunganjuk.com
Website : kayunganjuk.com
Pinterest : id.pinterest.com/kayunganjuk
Instagram : instagram.com/kayunganjuk
Facebook : facebook.com/fbkayunganjuk
Youtube : youtube.com/c/kayunganjuk