Professional Documents
Culture Documents
Syiham F1008 PT1
Syiham F1008 PT1
Syiham F1008 PT1
REPORT
PRACTICAL TASK 1
This topic covers Numerical Control (NC) operation, CAD, NC, & CAM system, and
geometric modelling. This topic also covers Part construction using CAD and
organization of geometric modelling. This topic covers parameter manipulation for hole,
& milling/lathe process together with the machining codes.
2.0 OBJECTIVES
State the purpose of this report.
1. Inventor part.ipt
2. 2D sketch
3. Line, circle, fillet, trim, mirror.
4. 3D model
5. Extrude
6. Inventor drawing.idw
4.0 PROCEDURE
List the step-by-step instruction drawing tools usage to complete the drawing.
3. Construct the orthographic projection and isometric view of the object given
below
complete with dimensions and hidden lines.
4. Using drawing.idw to construct the front view, top view, side view and the
isometric view and the dimensions.
6. Display the orthographic projection and isometric view of the object given below
complete with dimensions and hidden lines.
5.2 3D DRAWING
Screen capture of your drawing
5.3 ISOMETRIC & ORTHOGRAPHIC PROJECTION
Screen capture of your drawings complete with sufficient dimensions.
6.0. DISCUSSION
Explanation on software features used to develop and complete the drawing. Include the
challenge you faced and how to solve the issue.
1. Student can use the inventor part.ipt to sketch the object and given the
dimensions.
2. Student can use the extrude function to drag the front view to give the isometric
view.
7.0 CONCLUSION
Explain briefly on your work done in this task.
To conclusion, student can use the inventor correctly after done in this task. It because
this task teaches the student how to sketch the drawing and to extrude the object.
Student can practice the equipment in inventor to sketch the object. Inventor can use
easily to give the orthographic and isometric view correctly.
~ END OF REPORT ~