Professional Documents
Culture Documents
YKL-APC - SDO.PKE-MII-001 - Mechanical Item Installation R1
YKL-APC - SDO.PKE-MII-001 - Mechanical Item Installation R1
YKL-APC - SDO.PKE-MII-001 - Mechanical Item Installation R1
NOTE
RECEIVING AREA WAREHOUSE AREA
SCALE N.T.S
DATE 18/09/2023 REV 1
DRAWING BY SITI
CHECKED BY TC ER
APPROVED BY HW WONG
PROJECT TITLE
PROPOSED
PKE UNLOADING SYSTEM
120MT/HR
DRAWING NO.
YKL/APC-SDO-PKE/MII/001
DRAWING TITLE
MECHANICAL ITEM INSTALLATION
CODING Item No 20
Description Dust Collecting System NOTE
A DUST COLLECTING
kW 15
SYSTEM Qty 1
Remark:
1. To assembly and install ducting sets using bolts.
2. To install cyclone, fan & bag filter and to be fastened (using bolt) to plinth.
3. Position to suit dust collecting system plinth.
DRAWING NO.
YKL/APC-SDO-PKE/MII/001
DRAWING TITLE
MECHANICAL ITEM INSTALLATION
A
PROJECT NO. PAGE NO.
YKL 01/23 02/10
RECEIVING AREA DRAWING FILE
NOTE
CODING Item No 4
Description Ø24” Palm Kernel Expeller Transfer Screw Conveyor
No 1 below Receiving Hopper
16.5 kW 7.5
Qty 1 1 ADDED DESCRIPTION 18.09.23
Remark: 0 PRELIMINARY 20.03.23
1. To assembly screw conveyor by using bolt and install into position. REV DESCRIPTION DATE
2. To install conveyor cover, chain coupling and motor. CLIENT
3. To install and welding conveyor stand (interval 6m). APICAL GROUP
4. To fabricate at site 1 unit conveyor outlet chute to Item No 6 PT SARI DUMAI OLEO (SDO)
(approx. 400mm x 600mm x 500mm) and install (welding).
DRAWING NO.
YKL/APC-SDO-PKE/MII/001
DRAWING TITLE
MECHANICAL ITEM INSTALLATION
To install conveyor walkway & handrail for Item No 7 & 8.
- Walkway & handrail standard length: 6m PROJECT NO. PAGE NO.
(walkway & handrail to cut & assemble (welding) to suit site condition)
YKL 01/23 03/10
RECEIVING AREA DRAWING FILE
Qty 1
Remark:
1. To assembly screw conveyor by using bolt and install into position.
2. To install conveyor cover, chain coupling and motor.
3. To install and welding conveyor stand (interval 6m).
4. To install (welding) 1 unit conveyor outlet chute (c/w rack & pinion) 1 ADDED DESCRIPTION 18.09.23
and to fabricate extend chute at site (approx. 600mm x 600mm x 0 PRELIMINARY 20.03.23
770mm) and install (welding) to Item No 10. REV DESCRIPTION DATE
5. To fabricate at site 1 unit conveyor outlet chute to Item No 9 CLIENT
(approx. 600mm x 600mm x 1250mm) and install (welding).
APICAL GROUP
PT SARI DUMAI OLEO (SDO)
CODING Item No 6
Description Palm Kernel Expeller Elevator
31.0 kW 22
Qty 2
Copying utilization or handing over to third parties is
Remark: not permitted without the written consent of YKL
1. To assembly and install elevator body, belt, bucket (using Engineering
bolt), drum, motor, sprocket, chain, plummer block & gear
reducer.
2. Elevator position to suit elevator plinth and elevator base YKL ENGINEERING SDN BHD
fully welded to the plinth structure. LOT 663, BATU 10,
3. To fabricate at site 2 units elevator chute to Item No 7 & 8. KAMPUNG PAYA PANJANG,
(approx. 540mm x 730mm x 1540mm) & install (welding). BUKIT PASIR, 84300 MUAR
4. To fabricate at site 2 units safety cover and support JOHOR, WEST MALAYSIA
(approx. 1870mm x 200mm x 500mm) and install (bolt &
SCALE N.T.S
welding). DATE 18/09/2023 REV 1
DRAWING BY SITI
CHECKED BY TC ER
APPROVED BY HW WONG
PROJECT TITLE
CODING Item No 8
PROPOSED
Description Ø24” Palm Kernel Expeller Cross Screw
PKE UNLOADING SYSTEM
Conveyor No 2
9.4 kW 4 120MT/HR
Qty 1
Remark: DRAWING NO.
1. To assembly screw conveyor by using bolt and install into position. YKL/APC-SDO-PKE/MII/001
2. To install conveyor cover, chain coupling and motor.
3. To install and welding conveyor stand (interval 6m).
4. To install (welding) 1 unit conveyor outlet chute (c/w rack & pinion) DRAWING TITLE
and to fabricate extend chute at site (approx. 600mm x 600mm x MECHANICAL ITEM INSTALLATION
770mm) and install (welding) to Item No 10.
5. To fabricate at site 1 unit conveyor outlet chute to Item No 9 B PROJECT NO. PAGE NO.
(approx. 600mm x 600mm x 1250mm) and install (welding).
YKL 01/23 04/10
RECEIVING AREA DRAWING FILE
(VIEW A – A)
NOTE
Discharge Chute
SCALE N.T.S
DATE 18/09/2023 REV 1
DRAWING BY SITI
CHECKED BY TC ER
APPROVED BY HW WONG
CODING Item No 3 PROJECT TITLE
VIBRATING Description Vibrating Feeder PROPOSED
kW 0.65 PKE UNLOADING SYSTEM
FEEDER Qty 8 120MT/HR
Remark:
1. Vibrating Feeder to install below Receiving Hopper chute and DRAWING NO.
to be support to receiving hopper (bolt & welding). YKL/APC-SDO-PKE/MII/001
2. To fabricate at site 8 units discharge chute to Item No 4 & 5
(approx. 920mm x 620mm x 670mm) and install. 1. To install conveyor walkway & handrail for Item No 4 & 5.
- Walkway & handrail standard length: 6m DRAWING TITLE
(walkway & handrail to cut & assemble (welding) to suit site condition) MECHANICAL ITEM INSTALLATION
2. Conveyor and walkway support to fabricate and install at site. Base plate to be
fastened (using bolt) to floor (to suit site condition).
PROJECT NO. PAGE NO.
YKL 01/23 05/10
RECEIVING AREA DRAWING FILE
(VIEW B – B)
1. To install walkway and staircase (staircase base plate bolt to floor) NOTE
2. To install handrail surround receiving pit (handrail bolt to floor)
- Walkway, handrail & staircase standard length: 6m
(walkway, handrail & staircase to cut & assemble (welding) to suit site condition).
Ducting Reducer
Copying utilization or handing over to third parties is
not permitted without the written consent of YKL
Dust Collection Box Engineering
DRAWING NO.
Elevator Pit Elevator Plinth YKL/APC-SDO-PKE/MII/001
NOTE
To install conveyor walkway, staircase and handrail for Item No 9, 10, 11, 12, 13 & 14 Walkway and staircase support to fabricate
- Walkway, handrail & staircase standard length: 6m and install at site (to suit site condition).
(walkway, handrail & staircase to cut & assemble (welding) to suit site condition).
SCALE N.T.S
DATE 18/09/2023 REV 1
C DRAWING BY
CHECKED BY
SITI
TC ER
APPROVED BY HW WONG
PROJECT TITLE
CODING Item No 9 CODING Item No 10
PROPOSED
Description Ø24” Palm Kernel Expeller Transfer Screw Description Ø24” Palm Kernel Expeller Transfer Screw PKE UNLOADING SYSTEM
Conveyor No 1 Conveyor No 2 120MT/HR
26.6 kW 7.5 42.7 kW 11
Qty 1 Qty 1 DRAWING NO.
Remark: Remark: YKL/APC-SDO-PKE/MII/001
1. To assembly screw conveyor by using bolt and install into position. 1. To assembly screw conveyor by using bolt and install into position.
2. To install conveyor cover, chain coupling and motor. 2. To install conveyor cover, chain coupling and motor.
3. To install and welding conveyor stand (interval 6m). 3. To install and welding conveyor stand (interval 6m). DRAWING TITLE
4. To fabricate at site 1 unit conveyor outlet chute to Item No 13 4. To install (welding) 1 unit conveyor outlet chute (c/w rack & pinion) and MECHANICAL ITEM INSTALLATION
(approx. 600mm x 600mm x 1100mm) and install (welding). to fabricate extend chute at site (approx. 600mm x 600mm x 640mm)
and install (welding) to Item No 13.
5. To fabricate at site 1 unit conveyor outlet chute to Item No 11 (approx. PROJECT NO. PAGE NO.
600mm x 600mm x 1100mm) and install (welding).
YKL 01/23 07/10
WAREHOUSE AREA DRAWING FILE
SCALE N.T.S
DATE 18/09/2023 REV 1
DRAWING BY SITI
CHECKED BY TC ER
APPROVED BY HW WONG
PROJECT TITLE
PROPOSED
PKE UNLOADING SYSTEM
120MT/HR
DRAWING NO.
YKL/APC-SDO-PKE/MII/001
DRAWING TITLE
MECHANICAL ITEM INSTALLATION
NOTE
NOTE
CODING Item No 17
CODING Item No 15 Description Hot Spot Detection System
Description Dust Suppression Chute HOT SPOT
DUST kW ~
kW ~ DETECTION Qty 20
SUPPRESSION Qty 38 Remark:
Remark: 1. To install Hot Spot Detection (bolt).
1. To install (bolt & welding) 5 units at Item No 11. 2. Hot Spot Detection position to suit site condition.
2. To install (bolt & welding) 12 units at Item No 12. 1 ADDED DESCRIPTION 18.09.23
2. Support to fabricate and install (welding) at site (to suit site condition).
3. To install (bolt & welding) 5 units at Item No 13. 0 PRELIMINARY 20.03.23
4. To install (bolt & welding) 12 units at Item No 14. REV DESCRIPTION DATE
CLIENT
APICAL GROUP
PT SARI DUMAI OLEO (SDO)
SCALE N.T.S
DATE 18/09/2023 REV 1
DRAWING BY SITI
CHECKED BY TC ER
APPROVED BY HW WONG
PROJECT TITLE
PROPOSED
PKE UNLOADING SYSTEM
120MT/HR
CODING Item No 16
Description Water Spray Pump DRAWING NO.
PUMP kW 5.5 YKL/APC-SDO-PKE/MII/001
Qty 2
Remark:
1. Pump position to suit site condition and fastened (using bolt) to floor/plinth. DRAWING TITLE
2. To lay piping from pump to Item No 9 & Item No 10 (approx. L123m). MECHANICAL ITEM INSTALLATION
(thread & welding)
3. To install valves and fitting.
4. To fabricate and install (welding) pipe support at site (to suit site condition). PROJECT NO. PAGE NO.
YKL 01/23 10/10