Professional Documents
Culture Documents
BT2000SM User Manual 220V
BT2000SM User Manual 220V
Thank you for purchasing CTECHi portable power station. Please read the instruction manual
carefully before use.
This product can supply power to your electronic products when emergency power is needed
during outages, travel, outdoor operation, etc. This power supply supports 220V AC, USB/PD
output and 24V car charger cigarette lighter output. It can supply power for electrical appliances
with power within 2000W. Can supply power for electric kettles, induction cookers, electric drills,
LCD desktop computers, televisions, small rice cookers, electric fans, notebooks, stereos,
projectors, printers, tablet computers, mobile phones, cameras and lighting lamps,etc.
Super fast-charging technology: Only take about 2h for full charging.
A: The pictures and specification in this manual are for reference only.
B: This product can not replace the standard AC power supply of household appliances or digital
products.
C: The actual AC socket and voltage will vary according to the customer’s country and region.
D: This product uses an air-cooled system to dissipate heat. Please do not block the air inlet and
outlet of the air-cooled system when using this product.
Product Diagram
7 DC Switch Button
1
Charge this product
Note: For safety reasons, this product is designed with 55°C high temperature and 0°C low
temperature charging protection. When the product is discharged at the maximum power, the
internal battery temperature of the product may be higher than 55 degrees, and the battery
must be charged after cooling down. When the product has a low battery, the last battery
indicator flashes. When the product is exhausted, all the battery indicators are off and the
product automatically shuts down.
Fuse device
Solar input interface(optional)
Use the pin-head charging cable that matches this product to charge the device, and the mains
input power is 1000W super fast charging. This product is plug-and-charge and the device is
automatically turned on. After charging is turned on, the AC power indicator is always on, and the
power indicator flashes from the current power display to the full power to indicate that the
device is charging normally. When all the power indicators stop flashing and When it stays on, it
means the product is fully charged. After the product is fully charged, please unplug the power
cord in time and click the AC switch to turn off the AC output.
2
3. Solar charge for this product (optional function)
Solar charging
The Max input power is 500W
Note: The open circuit voltage of solar charging is 30V~40V, the open circuit voltage must be lower
than 40V, and the maximum input power of solar energy is 500W.
A. Put the solar panel in a place where it can be directly exposed to strong enough light, and adjust
the appropriate angle to provide charging efficiency.
B. Connect the output port of the solar panel to the input port of the product to charge. The battery
indicator flashes to indicate normal charging. When all battery indicators stop flashing and remain on,
it indicates that the product is fully charged. After the product is fully charged, please unplug the solar
charging port in time.
Reminder: The actual charging efficiency of solar energy will vary greatly due to weather, ambient
temperature, sunlight intensity, the angle of the solar panel facing the sun, and other factors. The
actual charging efficiency shall prevail.
MPPT technology
This product has built-in MPPT (Maximum Power Point Tracking) technology, which
can be charged efficiently through solar panels. MPPT technology is designed for use
in wind turbines and photovoltaic (PV) solar systems to maximize power extraction
under all conditions. Through the MPPT technology, the product can compare the
output voltage of the solar panel and the battery voltage in real time, and then
intelligently identify the best power output for charging to maximize the battery
charging efficiency.
How to use
1. Switch/button function
DC output indicator
Electric Quantity Indicator DC Switch button
AC Switch button
AC output indicator
3
AC Switch
Long press the AC Power button for 2 seconds, the AC indicator blue light will turn on, and then the
battery indicator blue light will turn on, that is, the AC output of the power supply has been turned on;
click the AC Power button and the AC indicator will turn off to stop the AC output. The host
automatically detects that the AC output power is less than 3W and greater than 10 minutes(when
there is no AC output0, the AC function will be intelligently turned off.
DC Switch
Long press the DC Power button for 2 seconds, the blue light of the DC indicator lights up, and then
the blue light of the power indicator lights up, that is, the DC output of the power supply has been
turned on; click the DC Power button and the DC indicator light is off to stop the DC output.
Note: When any switch of AC Power and DC Power is turned on, the blue power indicator will be
turned on, when AC Power and DC Power are turned off at the same time, the power indicator will go
out.
2. AC Output Function
220V device
The rated output power of the AC port of this product is 2000W, and the electrical
power connected to the output end must be less than or equal to the rated power.
hint:
A When the output power of the external electrical appliance is greater than the
rated power of the product, the machine will appear overload protection. At this
time, you should unplug the AC output device and restart the AC function of the
product.
B When a short circuit occurs in an external electrical appliance, the machine will
have short circuit protection. At this time, you should unplug the AC output device
and restart the AC function of the product.
4
3. UPS function
1000W mains
super fast charging
AC 220V output
This product supports UPS function and can be used while charging. When charging
suddenly stops during charging (such as sudden power failure), the output port will
not stop output to ensure the normal power supply of the product. When using the
UPS function, when the output power is greater than the rated power of this product,
the safety(fuse) device will play a protective role.
When using the UPS function, the maximum input power is 2200W, and the
maximum input power is equal to the sum of the AC output power and the charging
power of this product. For example, if the AC output power is 1850W, the charging
power for this product is 2200W-1850W=350W.
UPS switching time ≤ 15 milliseconds!
4. USB/PD output
DC output switch
Tip: If two USB-A ports are used at the same time, the total maximum power output
is 12W. If two QC3.0 ports are used at the same time, the total maximum power is
24W output.
5
5. DC cigarette lighter output
Tips: When the output power of the external electrical appliance is greater than the
rated power of this product, the cigarette lighter will activate the PTC self-protection
function, and the PTC will automatically heat up. After the temperature drops, the
car charger cigarette lighter can return to normal use.
A. When the output power of the external electrical appliance is greater than the
rated power of the cigarette lighter, the machine will have overload protection. At
this time, the output device of the cigarette lighter should be unplugged, and the
fault will be resolved.
B. When there is a short circuit in the external electrical appliances, the machine will
have short circuit protection. At this time, the output device of the cigarette lighter
should be unplugged, and the fault will be resolved.
C. The output interface of the 24V cigarette lighter is turned on by default.
Product Features
1. This product adopts self-developed super fast charging technology, which can fully
charge the product in 2 hours and increase the charging time.
2. Integrating AC, USB-A, QC3.0, USB-C, 24V DC output in one, the BT series of
innovative products have AC output of 300W~3000W power and sine wave for
selection. Meet users' different capacity needs and various outdoor scenarios.
3. Use automotive grade lithium iron phosphate batteries with high energy efficiency,
high safety, and low energy consumption.
4. High-power, large-capacity design, long battery life, equipped with fast charging
equipment, fast charging time.
5. Multiple intelligent safety protection design, regardless of charging, discharging,
standby, can easily deal with abnormal conditions such as overcharge, overload,
overcurrent, overvoltage, short circuit, overtemperature, etc.
6. The product is surrounded by metal, which is strong, wear-resistant and
corrosion-resistant, and is compact and convenient for outdoor travel.
7. 220V AC output, USB output and DC output, can charge multiple devices at the
same time.
6
8. It can be used for household appliances, office appliances, power tools, etc. BMS
power management program and fuel gauge display, high accuracy, easy to use and
easy to identify.
Application scenarios
1. As an uninterruptible power supply for outdoor work/office use, it can be connected to consumer
digital devices such as notebooks, tablets, and mobile phones.
2. Outdoor electricity for outdoor photography, RV, and off-road enthusiasts, outdoor electricity for
professional photography and recording equipment.
3. Electricity for outdoor markets, stalls, live broadcasts, lighting, oxygen production equipment,
drones and other equipment.
4. Emergency electricity use in mines, oil fields, geological prospecting, geological disaster rescue, etc.
5. Emergency power supply for medical equipment, small and micro emergency monitoring
equipment, and oxygen generating equipment for anesthesia.
6. Electricity for outdoor operations such as agriculture, animal husbandry, fishery, etc., and
emergency electricity for operations such as construction and decoration.
7. More power scenarios and equipment are waiting for you to expand and use.
7
Charging and
UPS function, charging and discharging function
discharging method
UPS switching time ≤15 milliseconds
Mains charging
Mains charging: three-pin interface
interface (input)
Solar charging Solar charging: XT60 interface / solar maximum input power 500W
interface (input) (optional)
Product weight 19KG 26KG
Product Size 370×220×233mm 370×220×283mm
Package Size 510×300×315mm 510×300×365mm
Charging temperature
0~45℃
Discharge
temperature -10~45℃
Storage temperature
-20~45℃
Cycle life More than 80% of remaining capacity after 2000+ cycles
Idle life It is recommended to charge the product every 3 months
Precautions
1. Do not short-circuit the product connection. To avoid short circuits, keep away from all metal
objects.
2. Do not heat this product or place it in fire, water or other liquids. Keep away from high temperature
environment. Do not expose the product to direct sunlight.
8
Disposal and recycling
This product should not be disposed of together with domestic waste. Please dispose of or
recycle this product and its battery in accordance with local regulations.
Packing list
Portable emergency energy storage power supply×1
Power charging cable×1
User Manual×1
Warranty card×1