Professional Documents
Culture Documents
Asgn#4 (SOM)
Asgn#4 (SOM)
Engineering Faculty
Question.1:
A copper rod of length 18 in. is to be twisted by torques T until the angle of rotation between the ends of
the rod is 3°. If the allowable shear strain in the copper is 0.0006rad, what is the maximum permissible
diameter of the rod.
Ans.
dmax = 0.413 in
Question.2:
A plastic bar of diameter d= 50mm is to be twisted by torques T until the angle of rotation between the
ends of the bar is 5°. If the allowable shear strain in the plastic is 0.012 rad, what is the minimum
permissible length of the bar.
Ans.
Lmin = 182mm
1
Kandahar University
Engineering Faculty
Question.3:
Determine the maximum tensile stress and maximum compressive stress due to the load P acting on the
simple beam AB. Data are as follows: P=5.4kN, L=3m, d=1.2m, b=75mm, t=25mm, h=100mm, and
h1=75mm.
Ans.
𝝈𝒄 = 73.2 Mpa
𝝈𝒕 = 43.9 Mpa
Question.4:
A T-beam is subjected to the bending moment of 15kN.m as shown in Fig. Determine the maximum
normal stress in the beam and the orientation of the neutral axis.
Ans.
𝝈𝑩 = 74.2 Mpa
B
𝝈𝑪 = -90 Mpa