Professional Documents
Culture Documents
PP MCQ
PP MCQ
PP MCQ
02. What features related to process orders can be used to fulfill Good Manufacturing Practices (GMP)
requirements?
There are 3 correct answers to this question.
a) Availability check
b) Digital signature
c) Resource selection
d) Electronic batch record
e) Approved master recipes
03. When scheduling a routing in the SAP ECC system, which of the following time elements is a
interoperation time?
Please choose the correct answer.
a) Safety time
b) Float before production
c) Processing time
d) Setup time
06. How can you convert planned orders into production orders in an SAP ECC system?
There are 3 correct answers to this question.
a) Automatically, in the planning run (MRP)
b) Set the conversion indicator in Customizing for the planned order.
c) Use mass processing.
d) Use the order progress report.
e) Use background processing.
08. You are using MRP controllers in an SAP ECC system. Which of the following statements
concerning MRP controllers are correct?
There are 2 correct answers to this question.
a) The MRP controller is maintained in production versions.
b) In multilevel single-item planning, materials are selected using the MRP controller.
c) An employee responsible for the planning of materials can be assigned to multiple MRP controllers.
d) The MRP controller is a central selection criterion for evaluating material requirements planning.
09. Where can you define the valid receivers for production order costs?
Please choose the correct answer.
a) In the valuation variant
b) In the production scheduling profile
c) In the settlement profile
d) In the costing variant
10. For which of the following objects can you enter a confirmation?
There are 2 correct answers to this question.
a) Production order
b) Production order operation
c) Trigger Point
d) Work Center
01. How can you limit the number of master data objects to be created when the manufacturing
process is the same for many different products?
02. Which elements are included in the structure of the batch where-used list?
There are 3 correct answers to this question.
a) Purchase orders
b) Planned orders
d) Stock transfers
e) Collective orders
03. You want to procure your material components based on a forecast for the finished material
derived from historical sales. When customers order, you produce the finished product and reserve it
for that particular order.
04. In which ways can you implement confirmations for production orders?
c) Through the SAP Integrated Business Planning (SAP IBP) cloud solution
d) Through automatic process messages using SAP NetWeaver Process Integration (PI)
05. Which of the following are prerequisites for running MRP in a plant?
06. Which of the following options can you use for automatic line loading of planned orders on
available production lines?
a) Planning table
b) Quota arrangement
c) Sequencing
d) Selection method
e) PP/DS heuristics
07. Which object in customizing controls the determination of planned total overhead process costs
for production orders?
a) Cost log
b) Accounting type
c) Costing variant
d) Settlement profile
08. For which planning strategy does the reduction of planned independent requirements always
occur with the goods receipt?
09. What happens when a repetitive manufacturing planned order is assigned to a production line in
the planning table?
There are 2 correct answers to this question.
10. The settings for MRP can be maintained at different levels. If settings have been maintained in
different places, in which sequence does the system search for the MRP settings?
01. Which activity can trigger an automatic availability check for the components of a production
order?
Please choose the correct answer.
a) Material staging
b) Order rescheduling
c) Order release
d) Goods receipt for a missing part
02. During the implementation of SAP ECC material requirements planning, the project team
defines MRP controller numbers in Customizing under the entry "Define MRP Controller" that can be
assigned to the planners responsible for the material.
Which of the following statements are correct concerning these MRP controllers?
There are 2 correct answers to this question.
a) The MRP controller number is a central selection
b) A planner responsible for a material can have multiple MRP controller numbers.
c) In multilevel single-item planning, materials are selected using the MRP controller number.
d) The MRP controller number is assigned using the production version.
03. Which of the following scheduling types can only be used in capacity planning?
Please choose the correct answer.
a) Midpoint
b) Forward
c) Only capacity requirements
d) Backward
04. The company you are advising uses a plant data collection system from company XYZ and would
like to distribute production orders to the terminals on this system and enter feedback using these
terminals.
Which integration possibilities would you recommend so that as little work as possible is required for
the customer to implement this?
Please choose the correct answer.
a) SAP Manufacturing Integration and Intelligence (SAP MII)
b) The plant data collection interface (PP-PDC)
c) Execution Steps (XSteps)
d) The process control system interface PI-PCS
05. The final assembly of a finished product should only be triggered when a customer order
arrives. Which planning strategy for the finished product do you use?
Please choose the correct answer.
a) Planning with make-to-stock (strategy 10)
b) Planning at the assembly level (strategy 70)
c) Planning without final assembly (strategy 50)
d) Planning with final assembly (strategy 40)
06. Which options can you use to convert planned orders into production orders in the
SAP ECC system?
There are 3 correct answers to this question.
a) Mass processing
b) Automatically in the planning run (MRP)
c) Background processing in a program
d) Customizing for the planned order
e) Order progress report
07. You want to use the function "Read PP master data" in the production order. However, while
calling the function you receive an error message. What could be the reason?
Please choose the correct answer.
a) The material availability check has been performed.
b) Goods movements have been posted.
c) The production order has been released.
d) Order papers have been printed.
08. Which statements about the reorganization of planned independent requirements in SAP ECC are
true?
There are 2 correct answers to this question.
a) The reorganization only affects planned independent requirements that lie on a time axis to the
past from a specified key date.
b) The reorganization can be parameterized using a plant-specific reorganization interval.
c) The reorganization only deletes planned independent requirements that have no fixed planned orders
to them.
d) The reorganization is a form of demand adjustment in which non-settled planned independent
requirements for the planning are set to inactive but are not deleted.
09. Which types of objects can be changed with Engineering Change Management (ECM)?
There are 3 correct answers to this question.
a) Task list
b) Work center
c) Production version
d) Bill of material
e) Material master
10. Which BOM selection possibilities are available for opening a production order?
There are 2 correct answers to this question.
a) Manual selection
b) Automatic selection controlled with Customizing settings
c) Selection by BOM number in the material master of the material to be produced
d) Selection using the production scheduling profile
e) Selection using a production version
Q 1 - Which of the following module deals with processes like capacity planning and material planning
and execution of production order, bill of material and goods movement?
A - Plant Maintenance
D - Production Planning
Q 2 - In SAP PP, which of the following object is at the top in an Organization structure?
A - Plant
B - Company Code
C - Sales Organization
D - Storage Location
A - Costing
D-A&B
E - All of the above
A - Material Management
C - Controlling
D - SAP QM
Q 5 - Which of the following movement type is used to transfer Posting to storage location?
A - 301
B - 302
C - 305
D - 311
A - MDL5
B - MDL3
C - MDL1
D - MEL1
Q 7 - In an industry, there is a high product stability, high repetition rate, and product complexity is
low. Which type of manufacturing is suitable for this type of production?
A - Discrete Manufacturing
B - Bulk Manufacturing
C - Repetitive Manufacturing
D - All of these
Q 8 - Goods issue can be cancelled till order status is confirmed CNF in system?
A - True
B - False
Q 9 - Which of the following report is used to collect information about hierarchy of work center of a
shift?
B - Shift Report
D - None of these
Q 10 - Which of the following Transaction can be used confirm a Production Order and for Goods
movement?
A - CO01
B - CO02
C - CO15
D - MD16