Professional Documents
Culture Documents
QRG 1076
QRG 1076
QRG 1076
•
•
CONTACT INFORMATION
www.supermicro.com (Email: support@supermicro.com)
Manuals: http://www.supermicro.com/support/manuals
•
•
PACKAGE C ONTENTS (Applies to single-pack only)
One (1) Supermicro Motherboard
Six (6) Serial ATA Cables (X8DTL-i/-iF)
X8DTL-3/-3F/-i/-iF • Drivers & Utilities: ftp://ftp.supermicro.com • Eight (8) Serial ATA Cables (X8DTL-3/-3F)
QUICK R EFEREN CE GUIDE Rev. 1.00 • Safety: http://www.supermicro.com/about/policies/safety_information.cfm • One (1) IO Back Panel Shield
Motherboard Layout and Features Jumpers, Connectors, and LED Indicators Memory Support
18 16
15 14
12 11
Jumpers This motherboard supports up to 96 GB of Registered (RDIMM) ECC or
13
1 12
1 10 19 VGA COM1
D20 LE2 USB0/1
Jumper Item # Description Default up to 24 GB of Unbuffered (UDIMM) ECC/Non-ECC DDR3 800/1066/1333
W8379 5ADG
MHz 3-channel (per CPU) memory in 6 DIMM slots.
UID FAN6 FAN5 JBT1 29 CMOS Clear Open (Normal)
W83527HG
111
BMC CTRL LAN2 LAN1 13 KB/Mouse JI C1/JI C2
2 2
22 SMB to PCI/PCI-E Slots Open/Open (Disabled)
COM2
WPCM450-R BMC
114 Flash ROM IPMI LAN
Note: For memory optimization, use only DIMM modules that have been validated by
JPL2 JPL1
JPG1 16 VGA Enabled Pins 1-2 (Enabled)
CTRL
LAN
15 17
CTRL
LAN
Supermicro. For the latest memory updates, please refer to our website at http://www.
JWOR
Chip
PHY
JPG1
16
1
JPL1/JPL2 7 LAN1/2 Enable Pins 1-2 (Enabled)
Slot2 PCI 33MHz
17
18
1 19
1 JPS1 35 SAS Enable Pins 1-2 (Enabled) (X8DTL-3/3F)
1
JI2C1
JI2C2
IPMB
JPS2 28 SAS RAID Select Closed (SR RAID Enabled) (X8DTL-3/3F)
USB2/3
120
JWD 19 Watch Dog Pins 1-2 (Reset)
121
DIMM Installation
JWOL
122
USB4/5
13
Connectors
Insert the desired number of DIMMs into the memory slots, starting with P1-
USB6
DIMM1A. For memory to work properly, follow the tables below for memory
COM1, COM2 4, 14 COM1/COM2 Serial Port/Header
125
population order. Refer to the motherboard layout (at left) for the location of
T-SGPIO2
© 2012 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's written
consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed.
BIOS
16
2
I-SATA5 I-Button 37 I-Button for RAID data storage (for X8DTL-3/3F only)
Memory Population for Optimal Performance
IPMB 17 IPMB I2C Header (for an IPMI card) (for X8DTL-iF/3F only)
I-SATA4
127
I-SATA3
Intel For a motherboard with One CPU (CPU1) installed
ICH10R
I-SATA2 (South Bridge) IPMI LAN 3 Dedicated IPMI LAN (X8DTL-3F/iF) (To Populate P1-DIMM slots)
I-SATA1
JPI2C 46 Power Supply SMBbus I2C Header Branch 0 Branch 1 Branch 2
Intel
128 5500
JD1 18 PWR LED/Speaker Header (Pins 4~7: Speaker) 3 DIMMs P1-1A P1-2A P1-3A
JBT1
JPS2
19
2 (North Bridge)
P1-DIMM1A
P1-DIMM2A
P1-DIMM3A
I-SATA0 JF1 38 Front Panel Connector
JL1 33 Chassis Intrusion Header
SAS0
Battery
SAS1 CPU2
JPI2C JOH1 36 Overheat LED Header
SAS2
146 Memory Population for Optimal Performance
130 SAS3 JPW1 42 24-pin ATX PWR, 8-pin Secondary PWR For a motherboard with One CPU (CPU2) installed
JPW3
145
SAS4
JPW2, JPW3 44, 45 8-pin Secondary PWR (To Populate P2-DIMM slots)
SAS5
Branch 0 Branch 1 Branch 2
JWF1 26 DOM (Disk-On-Module) Power Connector
P2-DIMM3A
P2-DIMM2A
P2-DIMM1A
JPW2
SAS6
14
4 3 DIMMs P2-1A P2-2A P2-3A
137 JWOL 21 Wake-On-LAN Header
JPW1
SAS7 LSI SAS1068E
I-Button
10
4 11
4
FAN4 139
LE1 12
4
FAN1
Keyboard/Mouse 1 PS/2 Keyboard and Mouse
FAN3
JF1
134
FAN2
LES2
JOH1
13
JL1
1 4
13
JPS1
LAN1, LAN2 6, 8 G-LAN (RJ45) Ports (Dedicated LAN: X8DTL-iF/3F) Memory Population for Optimal Performance
131 12
3 3 15
3 16
3 138
For a motherboard with Two CPUs installed
= mounting hole Note: Item numbers are listed in counterclockwise order. I-SATA0 ~ I-SATA5 27 (Intel South Bridge) SATA Ports
CPU1 (To populate P1- CPU2 (To populate P2-
SAS 0~7 30 SAS Ports 0~7 (for X8DTL-3/-3F only)
DIMMs) DIMMs)
CPU Installation Heatsink Installation Front Panel Control (JF1) 3-SGPIO-1, 32 Serial General Purpose I/O Headers for SAS (X8DTL-3/3F) Branch 0 Branch 1 Branch 2 Branch 0 Branch 1 Branch 2
3-SGPIO-2
Screw#4 20 19 6 DIMMs P1-1A P1-2A P1-3A P2-1A P2-2A P2-3A
Socket Keys CPU Keys T-SGPIO-1, 25 Serial General Purpose I/O Headers for SATA
Ground NMI
T-SGPIO-2
Screw#1 Screw#2
X X
USB 0/1, 2/3, 4/5, 6 2, 20, 23, 24 Universal Serial Bus (USB) Ports
Vcc
Power LED UID 11 Rear Unit Identify Switch
Back Panel IO Connectors
HDD LED Vcc VGA 5 VGA Connector
X8DTL-3F/iF only
Screw#3 NIC1 LED Vcc
B
NIC2 LED Vcc LED Indicators E A. Keyboard F. COM 1
OH/Fan Fail LED Vcc LED Item# Description State Status B. Mouse G. VGA
C. USB 0 H. GLAN1
Motherboard
PWR Fail LED Vcc D20 13 BMC Heartbeat LED Indicator Blinking BMC Normal
D. USB 1 I. GLAN2
Ground Reset Reset Button LE1 39 Onboard Standby LED Indicator Green System Power On
A D F G H I J E. IPMI LAN UID Button
Ground PWR Power Button LE2 12 Rear UID LED
2 1 C
Mounting Hole LES2 34 SAS Heartbeat LED Blinking SAS Normal
Note: Graphics shown in this quick guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this guide. Note: Refer to Chapter 2 of the User Manual on detailed information on jumpers, connectors, and LED indicators. Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and
CPU/motherboard installation instructions.