Professional Documents
Culture Documents
Apron Concrete Cracks Repair
Apron Concrete Cracks Repair
4. EQUIPMENT
Wire bruhing
Drill
Broom
Putty knife
4. MATERIAL
RHEOMIX 141 liquide is a styrene –butadiène ,co-polymer latex
EMACO R303 powder
Cement
Water
Support cleanning
1. Clean the area of the slab which have hair craks and apply wire brushing to
the cracks.
2. Wet the area with clean water to prevent hot sunny support
3. Mix Rheomix 141 and water by ratio 1:1 at time 3 to 5 minutes by using
electric drill. of
4. Add Emaco R303 and cement to the Rheomix ( 5 liter of Rheomix per
50kg of Emaco or 10liter per 50kg if chemical resistance is needed ) till
reach the needed putty for repair and use also drill.
The mixting quantity not over than 10kg
5. Apply the putty to the cracks. To fill the cracks and in the stickiness 6 mm to
60mm maximum
6. Use broom to have finishing as before on the slab.
7. Make sure that all the cracks are well filled
8. Apply the fresh mixed mortar do not allow any addition water in the ready or
old mixture
9. Clean all the surface of tooling
10. Curing after 24 hour and protect to dry slowly (see notice)
6 quality control
7- safety
All labors to wear their PPE
Safety application
Safety toolings
Cleanning of tooling and all surface in contact whith the matrial and the mixture