Professional Documents
Culture Documents
TRS 4
TRS 4
RO-TRS-4/1
Fully Automatic Side-Seal Strapper with
actuated Roller Conveyor for Strapping
EXCELLENCE IN STRAPPING SOLUTIONS
RO-TRS-4/1
Standard Features Technical Data
Strap end detection with ejection of the remaining strap Capacity:
Automatic strap loop ejection
approx. 30 bundles/minute
Dispenser with bayonet closure at a conveying speed of 0.6 m/s
Direct current drive of the unit by wear-free direct drives
Wear-free, controlled strap track system Strap Type:
Adjustable roller actuation with frequency controlled 5 - 12 mm PP strap
motor
Adjustable strap distances Strap Coil Dispenser:
PLC control Siemens type S 7 Core Diameter: 200 mm
Touch panel for optic operating instructions, trouble- Core Width: 190 mm
shooting guide, etc.
Electrical Power:
Heat-weld sealing system with electronic temperature
control Mains Voltage: 400 (415, 440),
50/60 Hz, 3PH
Permanent strapping counter 16 A CEE-plug
Dry contact relay for up-stream and down-stream Power Consumption: approx 1.9 kW
systems
Adjustable conveyor table height from 800-900 mm Pneumatic:
Structural coating RAL 5010 gentian blue Mains Pressure: 6 bar
1/4 inch fast clutch
Options Consumption at 25 cycles/minute:
Hold-down device Hold-down device: 130 l/minute
Special conveying height on request Back Stop: 70 l/minute
Special coating according to RAL card
Traffic light warning system including lowstrap
indication
Narrow sealer on request
1000 810 C
Working Width 480 600 A
mm 450 550 650 900 1300 1650
A 450 550 650 900 1300 1650
520
Cycles/minute
B
215
150
approx. 38 35 33 28 27 24
210
03 / 14 Subject to Alterations