Professional Documents
Culture Documents
Start Logic MkVI
Start Logic MkVI
Jeremiah Mokhomo:
1. If the Button is pressed for the first
time then the vehicle will be turned on.
2. If the button is pressed while the light
is flashing then a CAN signal will be send
and the engine will crank automaticaly.
3. If the Button is held down continously,
then the engine will crank for the
duration that you hold the button.
SAE J1939
SSM (Ignition
1. on) CCU-2
Jeremiah Mokhomo:
Ignition solenoid The CCU will check the following before
sending the start signal to the ADM
1. CCU, MDU and MMU software must
be the same ( as from 3.10 software)
2. TCU in Neutral
3. Starter prevention options
a. Seat belt
2. CCU-2 b. fleetmatic
c. Onboard Weighing
SAE J1939 d. Vehicle Service
DC CAN e. Transmission Service
MR ADM J3-E2 f. Pressing Service Brake
PIN 12