Professional Documents
Culture Documents
iRIS4 Quick User Guideline TestDisable EN-1
iRIS4 Quick User Guideline TestDisable EN-1
iRIS4 Quick User Guideline TestDisable EN-1
NOTE: The DISABLE Messages for events are with high priority but they are not displayed
Zone TEST automatically from the panel!
NOTE: The Messages for running tests in the system are with the lowest priority and they Indication for DISABLEMENT
are not displayed automatically from the panel!
Active Test Indication Messages for Zones in Test Number of Zone in Test
0
1 Tue 13.Jul.2021 08:15:44 Alarms
Zone in Test, Zone 002
0
13.07. Faults
13:22 2021 Evacuate RESET
2 Tue 13.Jul.2021 08:35:32 1
0 Disable
Alarms Zone in Test, Zone 055
Select the zones for testing. To test all zone numbers, press the “Select all” button. The zone is
Zone Status Enabled Disabled Apply
Press Up/Down buttons to review the rest zone numbers. Press “Test” to start. disabled.
Test Select all Stop Test Select all Stop
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
Button sequence for OUTPUTS DISABLE:
13.07. 11 12 13 14 15 16 17 18 19 20 13.07. 11 12 13 14 15 16 17 18 19 20
Choose an output to disable: Sounder;
13:22 13:22
2021 2021
Disable
Fire Brigade; Fire Protection;
21 22 23 24 25 26 27 28 29 30 21 22 23 24 25 26 27 28 29 30 Outputs
0
Alarms
0
Alarms
Fault Output; Relay 1-4.
31 32 33 34 35 36 37 38 39 40 31 32 33 34 35 36 37 38 39 40
0 0
Faults 41 42 43 44 45 46 47 48 49 50 Faults 41 42 43 44 45 46 47 48 49 50
0 3 The output is
Warnings 51 52 53 54 55 56 57 58 59 60 Test 51 52 53 54 55 56 57 58 59 60 Enabled Disabled Apply
disabled.
EXIT MENU Access 3 MORE EXIT MENU Access 3 MORE You can disable several outputs
at the same time.