SOLE DISTRIBUTOR AGENT :

® CV. MULTI SARANA INDUSTRI

MOLPHIDE
A Division of MPH Corporation
Kalianak Madya I Kav. 14
Phone: 6231-7494333; Fax.: 6231-7494666
MOLPHIDE
Contact Address : 22 Roxburycourt Niantic CT 06357 - USA Kalianak Barat No. 55 PJ
Contact Person : Ang Wei Ming Phone: 6231-7481440; Fax.: 6231-7491550
Phone : 1-860-7396902 Surabaya ,Jawa Timur
INDONESIA

DESCRIPTION:
MOLPHIDE 399
A Super Silicone designed to lubricate and preserve any material against heat, cold,
moisture, weathering and corrosion. Aerosol packed.
TYPICAL APPLICATIONS FOR MOLPHIDE399:
¨ In the work-shop:
Lubricate threads of studs, chains, bolts,
and adjusting screw. Spray MOLPHIDE 399
in a nut and you can tighten the bolt tighter to
ensure greater holding power, thus
preventing machinery from going out of line
because of loose bolts. Lubricates and
preserves all rubber parts, wiring, and
seals, gaskets and threads. Prevents glass
from misting. Use to keep solder from
sticking where it is not wanted.
¨
In the Home:
Keep stove burner reflectors clean; makes
oven cleaning easier. Protects aluminum
screens and doors. Keeps power mover
ignitions systems dry. Prevents freezer trays
from sticking. A waterproof fishing lines and
keeps lines afloat. Prevents shorting of
ignition coils and spark plugs on outboard
motors.
¨
In the Garage:
Eliminates squeaks and sticking of weather
stripping. Lubricates trunk lids, rubber
contact points, doors, and windows.
Excellent as preservative for under carriage
mountings, fan belts. Eases lowering and
rising of window channels. Keeps locks
t ro u b l e f re e. L u b r i c at e s a n t e n n a .
Waterproofs ignition wiring, spark plug
insulators, distributor caps, magnetos and
prevents shorts.
ADVANTAGES OF MOLPHIDE399:
High Silicone content:
In a Silicone lubricant, it is the silicones that do the work. Ordinary silicone aerosol
products contain two to six percent silicones. Unlike MOLPHIDE 399, which has much
higher silicone content? MOLPHIDE 399 was originally developed for U.S. Government
military aircraft ignition systems, but now is available for all industry. The special
silicones used in MOLPHIDE 399 are not affected by extreme heat or cold. In most
applications, neither water nor weather can wear it away.
MOLPHIDE 399 will make any sticky spot slick and provide better protections than most
ordinary materials. There are other silicone aerosol products on the market, but these
generally have low silicone content.
MOLPHIDE 399 is high in silicone – the other products are priced lower because they are diluted
with solvents and cheap fatty acids, which are cheaper than silicone. They are thin and watery
and run off weather stripping. Ordinary silicone lubricants are sticky and gummy and attract
harmful dirt.
MOLPHIDE 399 leaves a clear film with moisture resistant, non-flammable, longwearing and
odorless properties.
MOLPHIDE 399 super silicone aerosol is a special greaseless lubricant with exceptional non-
stick properties and which preserves all treated material against heat, cold, moisture,
weathering and corrosion.
MOLPHIDE 399 leaves a clear film that is non-flammable, long wearing, odorless and will not
melt, freeze, gum or become rancid. It contains a high percentage of silicones unlike other
silicone spray, which peak at between 2 to 6 percent.
MOLPHIDE 399 lubricates all surfaces including wood, plastics, metals, fabrics and rubber. It
also waterproofs and protects leather, wood, chrome, canvas and ignition systems.
APPLICATION
¨ Shake can thoroughly.
¨ Hold cans 100 – 150 mm (4 – 6“) from area to be treated and spray.
¨ This aerosol product operates best at room temperatures of between 150 to 300 C ( 600 – 860 F )
¨ After application, invert can and sprays until clear gas appears to prevent nozzle clogging.
IMPORTANT
Strictly observe all safety precautions relevant to the use of an aerosol product and/or printed on the
cans label.
MOLPHIDE 399 is pail package.