Professional Documents
Culture Documents
01-09 Energy Saving and Environmental Protection
01-09 Energy Saving and Environmental Protection
01-09 Energy Saving and Environmental Protection
Mode Measure
Normal mode N N
Power-saving Y N
mode
Enhanced power- Y Y
saving mode
● Idle board: Before logical boards are added, service boards automatically enter
the power saving state, and no power is applied to the boards.
● Idle port:
– Power saving is implemented by adding or deleting ports.
– When the logical port of a pluggable optical module is deleted, the laser
on this port is turned off automatically.
Heat dissipation is also an effective way to save power. Huawei OptiXtrans DC908
provides an adjustable fan speed mode and an auto fan speed mode. In auto
speed mode, the speeds of the fans in different partitions are adjusted separately
and steplessly according to the board temperature. The speed of the fans in the
low-temperature partition is automatically adjusted to a low level for power
saving. In adjustable speed mode, the fan speed can be set to any of the following
levels: low speed, mid-low speed, medium speed, mid-high speed, and high speed.
The fans in all fan tray assemblies rotate at the same speed and the speed of
individual fans cannot be adjusted.