Professional Documents
Culture Documents
Statical Calculation Slab
Statical Calculation Slab
For
Slab Formwork System
Main Contractor
CANAR
Project
Prepared by
M.A.
Page 1 of 19
GENERAL REMARKS
1. Permissible Loads
Plywood:
Secondary Beam
Primary Beam
Page 2 of 19
2.LOADS
Static calculation for bending moment, shear force and deflection are done using TIPOS Beam.
Loads
Supporting scaffolding according to DIN 4421 generallay 20% of the fresh concrete dead load at
Total Load, q = b + g + p + d
Page 3 of 19
STATIC CALCULATION
Page 4 of 19
3.Slab bottom formwork - 275 mm slab
Load Calculation- Slab Depth = 0.275 m
=26 X 0.275
=7.15 kN/m2
= 1.43 kN/m2
= 0.36 kN/m2
= 8.95 kN/m2
Page 5 of 19
3.a. Plywood 18mm
Distributed load on the plywood (w) = 8.95 kN/m2
= 0.21 kNm/m
O.K.
=0.0068((8.95 x 0.4884)/3.26)
= 1.06 mm
= 1.807 mm
O.K.
Page 6 of 19
3.b.a - H20-2.90M SECONDARY-TIMBER BEAM
Distributed load = 8.95 kN/m2
= 4.37 kN/m
Page 7 of 19
3.c.b - H20-5.90M PRIMARY-TIMBER BEAM
Max reaction on the primary =5.97 kN
Page 11 of 19
3.d.Layher TG60 Tower AR-TG-C-02-0
- Maximum reaction on the tubes = 28.3 kN
Page 12 of 19
4.Beam bottom formwork – 600X600 mm Beam
Load Calculation
= 15.6 kN/m2
= 3.12 kN/m2
Page 13 of 19
Plywood 18mm
= 0.244 kNm/m
Permissible bending moment = 0.456
O.K.
kNm/m
Maximum shear force = [0.525(L-b-t)/L] W x L
=0.0068((19.9 x 0.354)/3.26)
= 0.63 mm
Permissible deflection = Span / 270
= 350 /270
= 1.30 mm
O.K.
Page 14 of 19
4.a.H20- 1.5 M SECONDARY BEAM
Distributed load from the beam = 19.9 kN/m2
Total load from the beam 600x600 mm = 19.9 x 0.35 =6.97 kN/m
Total load from the Slab 275 mm = 8.95 x 0.35 =3.13 kN/m
Page 15 of 19
4.b.Primary beam – DOUBLE H 20 TIMBER BEAM
Max reaction on the primary 3.20= kN Spacing
= 3.77
Page 16 of 19
5.d.Layher TG60 Towers
- Maximum reaction on the Supports = 15.86 kN
No. of Towers needed for one floor = (47 x4 +5) for Slab shoring + (16X42)/3
= 417 Tower
Page 17 of 19
APPENDIX - 1
Page 18 of 19
Page 19 of 19