Professional Documents
Culture Documents
EA440 Hypack
EA440 Hypack
By John Lindberg
EA440 SOFTWARE
1. Set Operation to Inactive mode.
2. Create a LAN Port.
a. In the Installation dialog, select I/O Setup and click [Add].
FIGURE 1. Adding a LAN Port
May / 2016 1
Configuring the Kongsberg EA440 in HYPACK®
c. Configure the output in the Processed Data Output Configuration dialog and click
[OK].
FIGURE 4. Processed Data
Output Configuration
Dialog
• Choose Port as
Output Destination.
• Select the LAN port
you set up earlier.
• Select
echosounder
channels available.
• Click [OK].
2
Configuring the Kongsberg EA440 in HYPACK®
HYPACK® HARDWARE
1. In HARDWARE, add the KONGSBERG NETWORK driver (KongsbergNetwork.dll).
FIGURE 6. Adding the Kongsberg Network Driver to the HYPACK® HARDWARE Configuration
May / 2016 3
Configuring the Kongsberg EA440 in HYPACK®
4. Test the configuration. Click [Test Device] to see the SURVEY display and verify
everything is working properly.
4
Configuring the Kongsberg EA440 in HYPACK®
May / 2016 5