Professional Documents
Culture Documents
Brochure Brochure 687-7-2 2
Brochure Brochure 687-7-2 2
EL687
Training Programme
by
Dream Catcher Consulting Sdn Bhd
Synopsis
The course is aimed to cover the electrical wiring system based on the Electricity Supply Act 1990 and The
Electricity Regulation 1994. It is intended to ensure that participant are conversant with the basic guidelines for
electrical wiring system and to provide participants with a sufficient level of competence so that they will be able
to work safely, efficiently and legally on electrical installations. Under the Electricity Supply Act 1990 and
Electricity Regulations 1994, any electrical wiring in domestic dwellings are to be carried out by a competent
person. A competent person is someone who is approved by Energy Commission (Suruhanjaya Tenaga); the
Malaysian governing bodies, whom will be qualified with the ability to thoroughly check a wiring system for
safety. They are required to issue an Electrical Installation Certificate that complies with Building Regulation
requirements when the works has been completed.
Prerequisite
Course Methodology
Presentation, case review and work example for knowledge dissemination. This course is presented classroom
style, with practical demonstration to illustrate the concepts taught
Course Duration
Course Structure
Day 1
INTRODUCTION
Purpose
SUPPLY SYSTEM
ELECTRICAL WIRING
CABLE SELECTION
Earthing
Classification of Earthing
Types and Function of Earthing Accessories
Earthing arrangement using a TT system
Parts That Are Required To Be Earthed
Parts That Are Not Required To Be Earthed
Termination To Earth
Earth Electrode Resistance
Day 2
Legal Requirements
Testing
Continuity Test
Insulation Resistance Test
Polarity Test
Earth Electrode Resistance test; and
Residual Current Device Test.
HI Pot testing and PAT testing
Appendix I : Safety Requirements For Electrical Wiring Works in Residential Buildings
Appendix II : Table of Cable Current Carrying Capacity
Appendix III : Table of Cable Voltage Drops
Appendix IV : Examples of Cable Voltage Drop (Vd) Calculations
Appendix V : Form G (Supervision and Completion Certificate)
Appendix VI : Form H (Test Certificate)
Appendix VII : Symbols
Practical On How To Use Multimeter & Test Pen
Course Instructor(s)
Ir. Yap Chee Wah, IEM/BEM Pt. 2, P.ENG, MIEM is a Professional Engineer registered with the Board of
Engineers Malaysia. He has more than 10 years of experience in the electrical consultancy services. He is
experienced in housing, commercial, SREP and Feed-In-Tariff(F.I.T.) projects of different sizes and
complexities. The example of projects he involved are Mixed Township Development at Bdr. Bkt. Beruntung,
Government Office Building Lot 5G2 Putrajaya, UiTM Jengka Pahang, 1MW & 3.2MW Power Generation by
Landfill Gas at Bkt. Tagar, Electrical Cabling Works Identification and Related Tests of Existing Electrical
Installation for Data Centre at Affin Bank. In the 1MW & 3.2MW power generation projects at Bkt Tagar, Ir. Yap
has experience the design, installation, testing and commissioning and operating the LV, 11KV and 33KV
distribution and transmission network. His involvements includes but not limited to tendering & bidding, contract
management, engineering & project management, construction, procurement, quality assurance, Factory
Acceptance Test, Pre-Commissioning and Commissioning.
Ir. Yap has registered with Jabatan Pembangunan Kemahiran of Kementerian Sumber Manusia, Malaysia as
Pakar Industri(PIND), Panel NOSS(PNOSS), Pegawai Pengesah Luaran(PPL), Pegawai Pengesah Luaran-
Sistem Latihan Dwi Nasinal(PPL-SLDN), Pegawai Penilai Pengiktirafan Pencapaian Terdahulu (PPL-PPT), Sijil
Kemahiran Malaysia (SKM) tahap 2 & 3 (Electrical).
Prior to passing his IEM/BEM Pt. 2 graduate examination, Ir. Yap worked as a production executive in a
production assembly lines, controlling and managing the day to day production operation in the assembly
department. During this period, Ir. Yap has undergone several training courses as to upgrade the skill and
knowledge which are beneficial to his workplace such as Good Manufacturing Practices for Shopfloor
Improvement, Poka Yoke Mistake Proofing, Effective Supervisors, ISO 9000: Documentation and
Implementation, Supervisory Method And Effectiveness (PSME) From AOTS, JAPAN.
After completing his secondary high school, Ir. Yap started his technical education in Institute Latihan
Perindustrian(ILP), Kuala Lumpur. As a part-time student, he further pursued his electrical engineering diploma,
higher diploma, City & Guilds (803) in Institute Megatech, Kuala Lumpur.
Ir. Yap is also a Registered Wireman NIL(PW4) with Suruhanjaya Tenaga. During the employment with a
contractor firm, Ir. Yap worked as a Project Engineer. He has gained the experiences of hands-on wiring works
in different industries.
Administrative Details
Programme Logistics
Your Investment
Additional cost may incur for customization or extra material request. Course fee is 100% claimable from PSMB
(SBL scheme) in accordance to PSMB guidelines.
For pricing in Singapore dollars, convert the price per pax after SST to SGD and add 8% GST. Please write to
us at enquiry@dreamcatcher.asia to obtain an exact quotation and method of payment.
Method of Payment
Crossed cheque / bank draft made in favour of DREAM CATCHER CONSULTING SDN BHD. Registration form
together with payment to be couriered to :
Payment must be received no later than 10 working days before the course commences. An undertaking may
be accepted in cases where payment is delayed. However all payments must be made before the course
commences.
Closing registration date is 15-Jan-2024.
Fees will only be refunded in full for cancellation received in writing more than 10 working days prior to the
commencement date. Substitute attendee(s) will be accepted at no extra charge.
Disclaimer
Dream Catcher Consulting Sdn Bhd reserves the right to change the instructors, date and to vary/cancel the
programme should unavoidable circumstances arise. All effort will be taken to inform participants of the
changes. Upon sending the registration form, you are deemed to have read and accepted the terms.
Enquiries
Registration Form
(Emails are required to ensure notification of any changes reach the participant)
No. Name Job Title Department Email Mobile Number
1
Total Amount
(Emails are required to ensure notification of any changes reach the participant)
Submitted by:
Company Name:
Company Address:
Contact Person: Designation:
Dept: Phone:
Email:
Please complete this form with an authorised signature below and fax to fax registration form to +604 640 7110 or email to
email egistration form to register@dreamcatcher.asia. Call us at phone +604 640 7111 / 7112 for any enquiry
Authorised Signature:
* Please print full name (authorised signature) if you submit via email
Name: Designation:
Dept: Date:
This registration is invalid without a signature. Payment must be made no later than 10 working days before the course
commences. An undertaking may be accepted in cases where payment is delayed, However all payment must be made
before the course commences. Participants who registered but did not attend will be invoiced accordingly. Fees will only be
refunded in full for cancellation received in writing more than 10 working days prior to the commencement date. Substitute
attendee(s) will be accepted at no extra charge.
Enclosed cheque/bank draft no ____________________ made in favour of DREAM CATCHER CONSULTING SDN BHD