Professional Documents
Culture Documents
208 Manualmanual Kisssoft
208 Manualmanual Kisssoft
KISS_PROE_INTERFACE_NO_MENU = NO
If you set this environment variable to "No", a warning is displayed if no direct connection to
ProEngineer can be set up.
The warning message describes what you must do to generate the gear even though the connection
to ProEngineer is not present.
KISS_PROE_INTERFACE_CLASSIC = YES
The extra dialog in which you can select either "Generate gear in a new file" or "Generate gear on
shaft" is not now displayed.
KISS_PROE_INTERFACE__CLASSIC = NO
A dialog is displayed in which you can select either "Generate gear in a new file" or "Generate gear
on shaft".
If no environment variables are set, both these values are set to NO.
If you have installed Creo Parametric on the server and started it from the client, temporary files are
written to the server, not to the client. To prevent this, set the variables listed below in the "setup.txt"
file with this path.
APSF_WORK_DIR C:\temp