Professional Documents
Culture Documents
Honeywell Sensing Micro Switch Hdls Limit Product - 1845785
Honeywell Sensing Micro Switch Hdls Limit Product - 1845785
Tracking interchangeability
of actuator levers for single-
Twin shaft seals for an and double-pole switches,
extra measure of plug-in and non-plug-in.
protection. Optional
fluorocarbon or
fluorosilicone seals.
Dual bearings deliver
enhanced mechanical life.
Exclusive teller tab ensures
proper torque. When it cannot
be moved, the lever is tight
enough to prevent
slippage.
Boss-and-socket
head design for secure
head-to-body retention.
Each switch has four mounting holes; two “through” holes for front mount, and
two tapped holes in back for rear mount
2 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
Table 1. Specifications
Characteristic Parameter
Product type MICRO SWITCH heavy-duty limit switches
Certifications UL, CE, CSA, CCC
Reference standards UL508, CSA 22.2 #14, EN/IEC60947-5-1, GB 14048.5
Housing material Electrostatic epoxy coated zinc
Housing type HDLS Plug-in, HDLS Non-Plug-in
Side plunger - adjustable Side plunger - pin Side plunger maintained - pin
Side roller plunger Side rotary Side rotary maintained
Acutators/heads Top plunger - adjustable Top plunger - pin Top roller plunger
Top rotary Wobble - cable Wobble - cat whisker
Wobble - coil spring Wobble - plastic rod Wobble - spring wire
1NC 1NO SPDT snap action, double break
2NC 2NO DPDT center neutral, snap action, double break
Circuitry
2NC 2NO DPDT snap action, double break
2NC 2NO DPDT sequential, snap action, double break
0.5 in - 14NPT conduit 0.75 in - 14NPT conduit 12 ft cable, 6 ft cable
PG 13,5 conduit 20 mm conduit 4-pin micro-style connector
Termination types
4-pin mini-style connector 5-pin mini-style connector 9-pin mini-style connector
Manifold mounting
Contact type Snap action double break (form Za) same polarity each pole
Contact material Silver alloy (standard), optional gold-plated (low energy applications)
Utilization category AC-15, A600; DC-13, R300 (electrical ratings on page 5)
Rated operational voltage (Ue) 600 Vac, 250 Vdc
Rated operational current (Ie) 1.2 A, 0.1 A
Rated thermal current 10 A, 2.5 A
Rated insulation voltage 600 V
Rated impulse withstand volt-
2500 V
age (Uimp)
Short circuit protection device
Class J fuse, rated 10 A, 600 V
(SCPD) type and rating
Pollution degree 3
Sealing IP65/66/67; NEMA 1, 3, 4, 4X, 6, 6P, 12, 13
Operating temperature1 -12°C to 121°C [10°F to 250°F]; optional: -40°C to 121°C [-40°F to 250 ’F]
Vibration 10 g conforming to IEC 60068-2-6
Shock (actuator not fitted) 50 g conforming to IEC 60068-2-27
UNSPSC code 302119
UNSPSC commodity 302119 Switches and controls and relays
1
Reference page 8 for additional temperature detail.
LS A 1A 1 –
4 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
ASSEMBLY MODIFICATIONS • ROTARY HDLS Series Electrical Ratings:
10 A Continuous Carry
Momentary action rotary switches can be furnished in other
ac Volts; Pilot Duty: AC-15, A600/B600
than the normal assembled conditions. To specify modifica-
tions, add the numbers shown below to the catalog listings. Electrical Circuitry Vac Amps at 0.35 Amps at 0.35
Modification number suffixes are: Rating Power Factor Power Factor
1 Clockwise actuation only Make Break
2 Counterclockwise actuation only A* SPDT 120 60 6
3 Shaft to right of switch front AC-15, DPDT 240 30 3
A600
4 Shaft to left of switch front 480 15 1.5
5 Shaft to back of switch 600 12 1.2
7 Indicator light wired to NC circuit
B D 120 30 3
AC-15, 240 15 1.5
For example, B600
Catalog listing LSA1A23 is an LSA1A switch adjusted for coun- 480 7.5 0.75
terclockwise actuation only. The operating shaft is to the right 600 6 0.60
side of the switch when viewing it from the front (label side). D Gravity return (Model LSS..) and extra-low torque (Model
No lever. LST..)
Catalog listing LSA8A7 is an LSA8A switch with the 240 volt
indicator light wired to the NC circuit. No lever. HDLS Series Electrical Ratings:
dc Volts; Pilot Duty: DC-13, R300
Electrical Circuitry Vdc Make & Break Make & Break
PLUNGER ASSEMBLY MODIFICATIONS Rating Amps Amps
Inductive Resistive
Add the following modification numbers to the catalog listing
in the plunger switch: A, B* SPDT 125 0.25 0.8
DPDT 250 0.15 0.4
3 Side plunger to right of switch front
4 Side plunger to left of switch front
* For switches with an indicator light, use only at voltage stated
5 Side plunger to back of switch
for indicator light.
6 Roller on top plungers perpendicular to mounting sur-
face
MICRO SWITCH HDLS limit switches are capable of the follow-
7 Light on indicator versions wired to NC circuit
ing low voltage dc loads
8 Roller on side plungers in vertical position
For example, Circuitry Vdc Amps Amps
Catalog listing LSF1A3 is an LSF1A switch with the side roller Inductive Resistive
plunger to the right side. SPDT 24 10 10
DPDT 24 10 10
6 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
LSE - Side pin plunger: For actuating LSW - Adjustable side pin plunger:
motion inline with the plunger travel. Ac- Has the same features of the side plain
tuating head may be faced in any of four plunger plus the means to adjust the
positions, 90° apart. A boot seal on the operating points of the switch from
plunger and a seal between the head 41 mm to 47,4 mm [1.615 in to 1.865
and housing keep out coolant, dust, and in]. Seals are same as side pin plunger.
chips. Momentary action. Momentary action.
LSF - Side roller plunger: Fits close LSG - Maintained contact side pin
quarters under cams and slides. The plunger: Offers a maintained contact
head may be faced in any of four posi- on actuation of the switch. A reverse
tions, 90° apart. The roller can be turned motion of the plunger resets the
vertical or horizontal to the switch. Seals switch. Sealing is the same as other
are same as side pin plunger. Momen- side plunger actuation heads. Operat-
tary action. ing temperature range is -1°C to 93°C
[30°F to 200°F].
WOBBLE LEVER ACTUATING HEADS: Heads come with either a spring wire, Delrin® plastic rod, or steel cat whisker. Any move-
ment of the lever (except pull) will actuate the switch. Standard temperature range of -12°C to 93°C [10°F to 200°F].
LSJ1A-7M - Spring LSJ1A-7N - Flexible LSK1A-8C - Coil LSJ1A-7A - Plastic LSK1A-8A - Cat
wire: 300 Series SST actuator: Designed spring: Designed with rod: Recommended whisker: 300 Series
wire may be formed for with a tin-plated cable. a 300 Series SST coil where possible scratch- SST actuator designed
special applications. spring. ing or marring by for low operating force
the actuator is to be applications.
avoided.
Table 2. Temperature Limits Standard HDLS Low Temperature HDLS High Temperature HDLS
(Fluorosilicone Sealed): Y_B (Fluorocarbon Sealed)*: Y_C
Low Limit High Limit Low Limit High Limit Low Limit High
Limit
-12°C -1°C 93°C 121°C -40°C -29°C 93°C 121°C -12°C -1°C 121°C
[10°F] [30°F] [200°F] [250°F] [-40°F] [-20°F] [200°F] [250°F] [10°F] [30°F] [250°F]
LSA - Side Rotary Momentary X X X X X X
LSB - Top Rotary X X X X X X
LSC - Top Plain Plunger X X X X X X
LSD - Top Roller Plunger X X X X X X
LSE - Side Plain Plunger X X X X X X
LSF - Side Roller Plunger X X X X X X
LSG - Side Plunger, Maintained X X X X X X
LSH - Side Rotary, Low PT, Low Torque X X X X X X
LSJ - Wobble Stick X X X X X X
LSK - Cat Whisker X X X X X X
LSL - Side Rotary, Sequence X X X X X X
LSM - Side Rotary, Center Neutral X X X X X X
LSN - Side Rotary, Maintained X X X X X X
LSP - Side Rotary, Low Pretravel X X X X X X
LSR - Side Rotary, Low Torque X X X X X X
LSU - 5º Low Pretravel X X X X X X
LSV - Top Adjustable Plunger X X X X X X
LSW - Side Adjustable Plunger X X X X X X
* For HDLS application wherein the upper temperature limit is normally above 93°C [200°F], much longer switch life can be obtained by using
completely fluorocarbon-sealed switches rather than standard HDLS.
8 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
3 7
1st 2nd
2 6
Same
polarity
1 5 each
pole
T.T.
O.P.
NC = Normally closed contact(s) O.T.
NO = Normally open contact (s) NC
NO > Actuation
NO < Release
contact closed NC
contact open R.T. D.T.
F.P.
10 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
Table 3. Side Rotary • MICRO SWITCH HDLS Series Order Guide/Recommended Listings
3 4 3 4 3 4 3 4 3 4
3 4
1 2 1 2 1 2 1 2 1 2
1 2
7
1-2
3-4
3-4
1-2
7 8 7 8 8
1-2
3-4
3-4
1-2
1-2
3-4
3-4
1-2
0° 5 6 5 6 0° 2° 5 6
0° 5°
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
10° 6°
15° 9°
0° 0° 0° 1°
5° 5°
8° 9°
15°
75°
75°
75°
Contact closed n 75°
75° 75°
Contact open o
Non-plug-
Silver 0.5 in LSA3K LSP3K LSU3K
in
Silver Plug-in 0.75 in LSA2B LSP2B LSU2B
Gold 4
Plug-in 0.75 in LSA2S – –
Silver Plug-in 0.5 in LSA6B LSP6B LSU6B
Gold4 Plug-in 0.5 in LSA6S – –
DPDT
Table 4. Side Rotary • MICRO SWITCH HDLS Series Order Guide/Recommended Listings
1-2
3-4
3-4
1-2
7
1-2
3-4
3-4
1-2
7 8 8
0° 5 0° 5 6
6
6°
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
10° 9°
15°
0° 0°
5°
8° 9°
15°
75° 75°
Contact closed n 75° 75°
Contact open o
Pretravel 15° max. 15° max. 9° max. 9° max.
Different. travel 5° max. 7° max. 3° max. 4° max.
Overtravel 60° min. 60° min. 66° min. 66° min.
Oper. torque 0,19 Nm [1.7 in-lb] max. 0,19 Nm [1.7 in-lb] max.
Action CW & CCW (Momentary)
Op. temp range3 -1°C to 121°C [30°F to 250°F] (for low temp, high temp, or preleaded versions, see pages 8-9)
Circuitry Contacts Body Style2
Conduit Options
(NPT)
Silver Plug-in 0.5 in LSR1A LSH1A
Gold4 Plug-in 0.5 in LSR1E LSH1E
Silver Plug-in 0.5 in 120 V Ind. lite1
LSR5A LSH5A
SPDT
12 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
Table 5. Side Rotary • MICRO SWITCH HDLS Series Order Guide/Recommended Listings
1-2
3-4
5-6
7-8
7-8
5-6
3-4
1-2
1
1 2
Maintained
Contact 7
2
8 75°
0°
0°
1-2
3-4
3 4 5 6 10°
15°
0° 1 2 8°
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
20°
25°
18°
1-2
3-4
3-4
1-2
0° 0°
90°
25° 25°
18°
180°
8°
1-2
3-4
3-4
1-2
5-6
7-8
7-8
5-6
Contact closed n
Contact open o 0° 85° 85°
Pole 1: 15°
Pretravel 65° max. 65° max. 18° max.
Pole 2: add’l 10°
Different. travel 40° max. 40° max. 10° max. each pole: 5°
Overtravel 20° min. 20° min. 57° min. 48° min.
Oper. torque 0,45 Nm [4 in-lb] 0,45 Nm [4 in-lb] 0,45 Nm [4 in-lb]
Action Maintained CW & CCW (Momentary)
-12°C to 121°C
-1°C to 121°C [30°F to 250°F] [10°F to 250°F]
Op. temp range6 (for low temp, high temp, or preleaded versions, see pages 8-9) (for low temp, high temp, or pre-
leaded versions, see pages 8-9)
Figure 2. MICRO SWITCH HDLS side rotary (single pole) di- Figure 3. MICRO SWITCH HDLS side rotary (double pole)
mensions dimensions
7,32 7,32
[.29] [.29]
106,7
[4.20]
59,4 119
[2.34] 70,4 [4.69] 59,4
[2.77] [2.34]
82,6
74,9 89,5 [3.53]
[2.95] [3.53]
119
[4.69] 59,4
59,5 [2.34]
[2.34] 70,4 82,6
[2.77] 89,7 [3.25]
75,9 [3.53]
[2.97]
20,3 21,3
[0.8] 29,4 [.84]
29,4
CONDUIT OPENING [1.16] [1.16]
LOCATION 41,1 CONDUIT OPENING 38,1
36,6 [1.62] LOCATION [1.50] 47,8
[1.44] 45,3 [1.88]
2X 10-32 UNF [1.78]
44,5 TAPPED FROM REAR ONLY 2X 10-32 UNF
[1.75] TAPPED FROM REAR ONLY
2X 5,2 [.20] Ø MTG HOLES
2X 5,2 [.20] Ø MTG HOLES
8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH
14 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
Table 6. Top Rotary • MICRO SWITCH HDLS Series Order Guide/Recommended Listings
1-2
3-4
3-4
1-2
0° 5 6
15°
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
25°
0°
13°
25°
135°
Contact closed n 135°
Contact open o
Pretravel 25° max. 25° max.
Different. travel 10° max. 12° max.
Overtravel 110° min. 110° min.
Oper. torque 0,28 Nm [2.5 in lb] max.
Action CW and CCW (Momentary)
Op. temp range3 -12°C to 121°C [10°F to 250°F] (for low temp, high temp, or preleaded versions, see pages 8-9)
Circuitry Contacts Body Style2 Conduit Options
(NPT)
Silver Plug-in 0.5 in LSB1A –
Gold 4
Plug-in 0.5 in LSB1E –
Silver Plug-in 0.5 in 120 V Ind. lite1 LSB5A –
SPDT
Figure 4. MICRO SWITCH HDLS top rotary (single pole) dimen- Figure 5. MICRO SWITCH HDLS top rotary (double pole)
sions dimensions
57,2
[2.25]
127.6 57,2
[5.02] 36,4 42,4 [2.25]
36,4 42,4
[1.43] [1.67] [1.43] [1.67]
139,8
[5.5]
59,4 59,5
[2.34] 70,4 89.7 [2.34]
74,9 82,6
[2.95] [2.77] [3.53] [3.25]
16,5 29,4
[.65] [1.16] 18,8 29,4
25,4 [.74] [1.16]
[1.00] 41,1 26,4
39,1 [1.62] [1.04] 47,8
[1.54] 44,4 [1.88]
[1.75] 2X 5,2 [.20] Ø MTG HOLES 45,3
CONDUIT OPENING [1.78] 2X 10-32 UNF
LOCATION CONDUIT OPENING TAPPED FROM REAR ONLY
2X 10-32 UNF LOCATION
TAPPED FROM REAR ONLY 2X 5,2 [.20] Ø MTG HOLES
8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH
21,6 21.6
[.85] 39,6 [.85] 39.8
[1.56] [1.56]
MTG PADS 7,32 DIA
MTG PADS 7,4 DIA [.29]
[.29]
57,2
[2.25]
36,4 36,4 42,4 36,4
42,4 [1.43]
[1.43] [1.67] [1.43] [1.67]
127,6 139.8
[5.02] [5.5]
59,5
75,8 59,4 [2.34]
[2.34] 70,4 89.7
[2.98] [3.53] 82.6
[2.77] [3.25]
20,3 29,4
[.80] [1.16] 21,3
[.84] 29,4
36,6 41,1 38,1 [1.16]
[1.44] [1.62] [1.50]
39,0
[1.54] 47.8
44,4 2X 5,2 [.20] Ø MTG HOLES CONDUIT OPENING 45,3 [1.88]
[1.75] LOCATION [1.78]
CONDUIT OPENING 2X 10-32 UNF
LOCATION 2X 10-32 UNF TAPPED FROM REAR ONLY
TAPPED FROM REAR ONLY
2X 5,2 [.20] Ø MTG HOLES
8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH
16 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
Table 7. Common levers for use with MICRO SWITCH HDLS Rotary Switches
Levers for use with side or top rotary actuated switches are available in a wide choice of sizes and materials. The most common
listings are shown below. Rollers may be on either side of the lever to best match the external acutating mechanism.
LSZ55A,LSZ55B,
LSZ60 LSZ53A, LSZ53B, LSZ53D LSZ54R
LSZ55C,LSZ55D
one-way yoke lever, nylon and steel rollers, spring wire
offset lever,
roller lever front/back placement 305 mm [12 in]
front/back
Catalog Material Rod/Roller Rod/Roller Roller Catalog Material Rod/Roller Rod/Roller Roller
Listing Dia. mm Width mm Mounting Listing Dia. mm Width mm Mounting
[in] [in] [in] [in]
Fixed 38,1 mm [1.5 in] radius Fixed 38,1 mm [1.5 in] radius
– Rollerless n/a n/a n/a – Rollerless n/a n/a n/a
LSZ51A Nylon 19 [0.75] 6,35 [0.25] Front LSZ55A Nylon 19 [0.75] 6,35 [0.25] Back
LSZ51B Steel 19 [0.75] 6,35 [0.25] Front LSZ55B Steel 19 [0.75] 6,35 [0.25] Back
LSZ51C Nylon 19 [0.75] 6,35 [0.25] Back LSZ55C Nylon 19 [0.75] 6,35 [0.25] Front
LSZ51D Steel 19 [0.75] 6,35 [0.25] Back LSZ55D Steel 19 [0.75] 6,35 [0.25] Front
LSZ51F Nylon 25,4 [1.0] 12,7 [0.50] Front LSZ55E Nylon 19 [0.75] 12,7 [0.50] Front
LSZ51G Nylon 38,1 [1.5] 6,35 [0.25] Front LSZ55K Nylon 38,1 [1.5] 6,35 [0.25] Front
LSZ51J Nylon 25,4 [1.0] 12,7 [0.50] Back Short fixed - 33 mm [1.3 in] radius
LSZ51L Ball bearing 19 [0.75] 6,35 [0.25] Back LSZ59A Nylon 19 [0.75] 6,35 [0.25] Front
LSZ51M Nylon 19 [0.75] 31,7 [1.25] Back LSZ59B Steel 19 [0.75] 6,35 [0.25] Front
LSZ51N Steel 19 [0.75] 31,7 [1.25] Front LSZ59C Nylon 19 [0.75] 6,35 [0.25] Back
LSZ51P Nylon 19 [0.75] 12,7 [0.50] Front LSZ59D Steel 19 [0.75] 6,35 [0.25] Back
Adjustable 38,1 mm to 89,0 mm [1.5 in to 3.5 in] radius
– Rollerless n/a n/a n/a
LSZ52A Nylon 19 [0.75] 6,35 [0.25] Back
38,1 mm [1.5 in] radius one-way roller lever
LSZ52B Steel 19 [0.75] 6,35 [0.25] Back
LSZ60A Nylon 19 [0.75] 6,35 [0.25] Front
LSZ52C Nylon 19 [0.75] 6,35 [0.25] Front
LSZ60B Steel 19 [0.75] 6,35 [0.25] Front
LSZ52D Steel 19 [0.75] 6,35 [0.25] Front
LSZ52E Nylon 19 [0.75] 33,0 [1.30] Front
LSZ52J Nylon 25,4 [1.0] 12,7 [0.50] Front
LSZ52K Nylon 38,1 [1.5] 6,35 [0.25] Front
LSZ52L Ball bearing 19 [0.75] 6,35 [0.25] Front Flexible loop
LSZ52M Nylon 50,8 [2.0] 6,35 [0.25] Front LSZ61 Ø 4,8 [Ø 0.19] 152 mm [6 in] flexible loop
LSZ52N Nylon 19 [0.75] 12,7 [0.50] Front Plastic
Yoke – 38,1 mm [1.5 in] radius LSZ618 Ø 4,8 [Ø 0.19] 241 mm [9.5 in] flexible loop
Plastic
LSZ53A Nylon 19 [0.75] 6,35 [0.25] Front/Back
LSZ54 Hub only n/a n/a n/a
LSZ53B Steel 19 [0.75] 6,35 [0.25] Front/Back
LSZ53D Steel 19 [0.75] 6,35 [0.25] Front/Front
LSZ53E Nylon 19 [0.75] 6,35 [0.25] Back/Front
LSZ53M Nylon 19 [0.75] 31,7 [1.25] Back/Front
LSZ53P Steel 19 [0.75] 6,35 [0.25] Back/Back
LSZ53S Nylon 19 [0.75] 6,35 [0.25] Back/Back Spring rod
Rod LSZ68 Delrin rod, 305 Ø 6,35 n/a n/a
– Hub only n/a n/a n/a [12 ] [Ø 0.25]
LSZ617 Delrin rod, 406 Ø 6,35 n/a n/a
LSZ54M Alum, 140 mm Ø 3,2 n/a n/a [16] [Ø 0.25]
[5.5 in] [Ø 0.125] LSZ686 Delrin rod, Ø 6,35 n/a n/a
152 [6] [Ø 0.25]
LSZ54N Stainless, 330 Ø 3,2 n/a n/a
mm [13 in] [Ø 0.125]
LSZ54R SST spring Ø 1,9 n/a n/a
wire, 305 mm [Ø 0.075]
[12 in]
LSZ54V Flex cable (tin Ø 4,8 n/a n/a
plated steel), [Ø 0.19] Rubber roller levers
122 mm
[4.8 in] LSZ51Y Rubber 50 [2.0] 12,7 front
38,1 mm [1.5 in] [0.50]
LSZ54P Plastic rod, Ø 6,85 n/a n/a radius (std.)
533,4 mm [Ø 0.27]
[21 in] LSZ55Y Rubber 50 [2.0] 12,7 front
38,1 mm [1.5 in] [0.50]
LSZ54W Plastic rod, Ø 6,85 n/a n/a radius (offset)
183 mm [Ø 0.27]
[7.2 in] LSZ52Y Rubber 50 [2.0] 12,7 front
38,1 mm to 89,0 [0.50]
LSZ54T 330 [13] Ø 4,8 n/a n/a mm [1.5 in to
stainless steel [Ø 0.19] 3.5 in] radius
Spoke (adjustable)
LSZ69CA 152 mm [6.0 3,2 [0.125] n/a n/a Plastic roller levers
in] Stainless LSZ67AA* Plastic 38,1 [1.5] 96,5 [3.8] n/a
(conveyor)
* may require orientation of switch and lever to enable gravity to help restore free position of switch.
18 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
Figure 6. LSZ51 type levers cam tracking Figure 7. LSZ52 type levers cam tracking
57,4 - 63,8 6,35 mm x 19,0 mm dia
[2.26 - 2.51] 56,4 mm to 62,7 mm
ADJUSTMENT [2.22 in to 2.47 in] [0.25 in x 0.75 in dia] OR
LEVER INVERTED 58,9 - 65,3 adjustment 6,35 mm x 38,1 mm dia
51,0 - 57,4 [2.32 - 2.57]
[2.01 - 2.26] ADJUSTMENT [0.25 in x 1.5 in dia] OR
ADJUSTMENT 42,9 - 49.3 12,7 mm x 25,4 mm dia
[1.69 - 1.94]
6,35 X 19,0 DIA ADJUSTMENT [0.50 in x 1.0 in dia]
[.25 X .75 DIA]
LEVER 6,35 X 19,0 DIA
INVERTED [.25 X .75 DIA]
21,3
[.85]
21,3 mm
21,3 [0.85 in]
38,1 [.85]
[1.5]
38,1 mm to 91,1 mm
38,1
[1.50] [1.5 in to 3.6 in]
25,4 adjustment
[1.00] 25,4
[1.00]
19,0
[.75] 25,4 mm
19,05
[.75]
[1.00 in]
19,0 mm
11,0 [0.75 in]
[.43] 6,35
[.25] 11,0 6,35
ADJUSTMENT [.43] [.25]
ADJUSTMENT
6,35 mm
11,0 mm [0.25 in]
[0.43 in] adjustment
Figure 8. LSZ54 type levers cam tracking Figure 9. LSZ55 type levers cam tracking
78,2 mm to 84,6 mm
58,7 mm to 65,0 mm [3.08 in to 3.33 in]
[2.31 in to 2.56 in] adjustment
adjustment
70,9 mm to 77,2 mm 6,35 mm x 19,0 mm dia.
[2.79 in to 3.04 in] [0.25 in x 0.75 in dia.]
adjustment
21,3 mm
21,3 mm [0.85 in]
127,0 mm [5.0 in] max. aluminum rod
[0.85 in]
330,2 mm [13.0 in] max. stainless steel rod
38,1 mm
[1.50 in]
25,4 mm
25,4 mm
[1.00 in]
[1.0 in]
19,05 mm
9,05 mm [0.75 in]
[0.75 in]
Table 9. Top Plungers • MICRO SWITCH HDLS Series Order Guide/Recommended Listings
1-2
3-4
3-4
1-2
1-2
3-4
3-4
1-2
1-2
3-4
3-4
1-2
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
0 in 0 in 0 in
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
0 in 0 in
1,4 mm 0 in
1,78 mm 1,4 mm 1,4 mm
[0.055 in] 1,78 mm
[0.07 in] 1,27 mm 1,78 mm [0.055 in]
1,27 mm
[0.055 in] 1,27 mm
[0.050 in] [0.07 in] [0.07 in]
1,4 mm [0.050 in] 1,4 mm [0.050 in]
1,4 mm
[0.07 in] [0.07 in] [0.07 in]
6,6 mm
[0.26 in] 6,6 mm 6,6 mm
[0.26 in] [0.26 in]
6,6 mm 6,6 mm
[0.26 in]
6,6 mm
[0.26 in]
[0.26 in]
Contact closed n
Contact open o
Non-plug-
Silver 0.75 in LSC4L LSD4L LSV4L
in
DPDT
Double Break
Non-plug-
Silver 0.5 in LSC7L LSD7L LSV7L
in
1
Use at voltage indicated for light. Wired to NO circuit. Upper temperature limit for lighted units is 93°C [200°F]
2
Plug-in listings include base receptacle
3
Completely fluorocarbon sealed switches are preferred for use in temperatures above 93°C [200°F]
4
Gold-plated contacts
NOTE: Same polarity each pole.
To order a fluorocarbon sealed switch, insert the letters Y and C into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAC1A limit switch.
To order a low temperature, fluorosilicone sealed switch, insert the letters Y and B into the catalog listing as follows. The LSA1A limit switch is changed to a LSYAB1A
limit switch.
20 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
Figure 10. MICRO SWITCH HDLS LSC Series (single pole Figure 11. MICRO SWITCH HDLS LSC Series (double pole
plunger dimensions plunger dimensions
46,0 46,0
MTG PADS [1.81] [1.81]
OPERATING POINT 28,7 MTG PADS OPERATING POINT 28,7
[1.13] [1.13]
59,4 59,5
[2.34] 70,4 [2.34]
[2.77] 82,6
74,9 [3.25]
[2.95] 89,7
[3.53]
46,0
46,0 [1.84]
MTG PADS [1.81] MTG PADS OPERATING POINT
28,7 28,7
OPERATING POINT
[1.13] [1.13]
59,5
89,7 [2.34]
59,4 82,6
70,4 [3.53]
[2.34] [3.25]
[2.77]
75,8
[2.98]
29,4
[1.16]
29,4
CONDUIT OPENING [1.16] 47,8
CONDUIT OPENING
LOCATION LOCATION 21,3 [1.88]
41,1
20,3 [0.84]
[1.62]
[.80] 38,1
2X 10-32 UNF
[1.50]
36,6 2X 10-32 UNF TAPPED FROM REAR ONLY
45,3
[1.44] TAPPED FROM REAR ONLY [1.78] 2X 5,2 [.20] Ø MTG HOLES
39,0 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH
[1.54] 2X 5,2 [.20] Ø MTG HOLES
44,4
[1.75]
55,9 55,9
[2.20] [2,20]
OPERATING OPERATING
28,7 POINT POINT
28,7
[1.13] [1.13]
74,9 59,4
[2.95] [2.34] 70,4 59,5
[2.77] 89,7 [2.34]
82,6
[3.53]
[3.25]
CONDUIT OPENING
LOCATION 29,4
16,5 [1.16] CONDUIT OPENING
[.65] LOCATION
41,1 29,4
25,4 [1.62] 21,3 [1.16]
[1.00] [.84] 47,8
39,1 2X 5,2 [.20] Ø MTG HOLES 26,4 [1.88]
[1.54] [1.04] 2X 10-32 UNF
2X 10-32 UNF 45,3
44,4 TAPPED FROM REAR ONLY [1.78] TAPPED FROM REAR ONLY
[1.54]
2X 5,2 [.20] Ø MTG HOLES
9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH
DIMS: MM
[IN]
LSD SPDT PLUG-IN PRODUCT DIMENSIONS
39,6 39,6
[1.56] [1.56]
21,6
25,4 [.85] 25,4
21,6 [1.00] [1.00]
4,8 14,7
[.85] MTG PADS [0.19]
14,7 Ø12,7 [.58]
4,8 [.58] [.50]
Ø12,7
[1.19] [.50]
55,9
[2.20]
55,9 OPERATING
MTG PADS [2.20] POINT
28,7
OPERATING
POINT [1.13]
28,7
[1.13]
59,5
89,7 [2.34]
[3.53] 82,6
75,8 59,4 [3.25]
[2.34] 70,4
[2.98] [2.77]
22 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
Figure 14. MICRO SWITCH HDLS LSV Series top adjustable Figure 15. MICRO SWITCH HDLS LSV Series top adjustable
plunger (single pole) dimensions plunger (double pole) dimensions
59,5
[2.34]
89,7 82,6
59,4 [3.53] [3.25]
[2.34] 70,4
[2.77]
74,9
[2.95]
CONDUIT OPENING
LOCATION 29,4
CONDUIT OPENING 29,4 [1.16]
LOCATION [1.16] 18.8 47,8
41,1 [.74] [1.88]
16,5 26,4
[.65] [1.62]
[1.04] 2X 10-32 UNF
25,4 38,1 TAPPED FROM REAR ONLY
[1.00] [1.50]
39,0 2X 5,2 [.20] Ø MTG HOLES 45,3 2X 5,2 [.20] Ø MTG HOLES
[1.54] [1.78] 9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH
44,5 2X 10-32 UNF
[1.75] TAPPED FROM REAR ONLY DIMS: MM
[IN]
DIMS: MM
[IN] LSV DPDT PLUG-IN PRODUCT DIMENSIONS
(FOR REFERENCE ONLY)
LSV
SPDT SPDT PLUG-IN(mm[in])
Non-plug-in PRODUCT DIMENSIONS DPDT Non-plug-in (mm[in])
(FOR REFERENCE ONLY)
14,7
14,7
Ø 25,4 [.58]
[.58]
21,6 7,9 [Ø1.00]
7,9
[.85] [.31] 21,6
[.31]
36,6 [.85]
25,4 [1.56]
[1.00] 17,5 28,7 59,4
MTG PADS [.69] [1.13]
17,5 59,4 [2.34]
28,7 [2.34] 53,1 MAX OPERATING
[.69] [1.13] POINT
MTG PADS 53,1 MAX OPERATING [2.09]
POINT MIN OPERATING
[2.09] POINT
MIN OPERATING
POINT
59,5
89.65 [2.34]
82,6
59,4 [3.25]
75,8 70,4
[2.98] [2.34]
[2.77]
CONDUIT OPENING
LOCATION 29,4
CONDUIT OPENING 29,4 [1.16]
LOCATION [1.16] 21,3
[.84]
47,8
20,3 41,1 38,1
[1.88]
[.80] [1.62] [1.50]
45,3 2X 10-32 UNF
36,6 [1.78] TAPPED FROM REAR ONLY
[1.44] 2X 5,2 [.20] Ø MTG HOLES
39,0 2X 5,2 [.20] Ø MTG HOLES
[1.54] 2X 10-32 UNF 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH
44,4 DIMS: MM
[1.75] TAPPED FROM REAR ONLY [IN]
DIMS: MM
[IN] LSV DPDT NON PLUG-IN PRODUCT DIMENSIONS
(FOR REFERENCE ONLY)
Table 10. Side Plungers • MICRO SWITCH HDLS Series Order Guide/Recommended Listings
Heads may be positioned to accept actuation Plain (LSE) Roller (LSF) Adjustable Maintained (LSG)
(LSW)
from any of four directions, 90° apart.
Snap Action
2NO/2NC
Snap Action
1NO/1NC 3 4
1 2
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
3 4
7 8
1-2
3-4
3-4
1-2
1 2 0 in 0 in
5 6
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
1-2
3-4
3-4
1-2
0 in
2,03 mm 2,03 mm
[0.08 in] [0.08 in]
0 in reset reset
1,4 mm
2,54 mm [0.055 in] 1,4 mm
[0.10 in] 2,54 mm [0.055 in] 4,32 mm 4,32 mm
[0.10 in] [0.17 in] [0.17 in]
trip trip
6,35 mm 6,35 mm
[0.25 in] [0.25 in]
7,36 mm 7,36 mm
Contact closed n [0.29 in]
[0.29 in]
Contact open o
24 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
Figure 16. MICRO SWITCH HDLS LSE Series side plain plunger Figure 17. MICRO SWITCH HDLS LSE Series side plain plunger
(single pole) dimensions (double pole) dimensions
DIMS: MM
[IN] LSE DPDT PLUG-IN PRODUCT DIMENSIONS
33,0 14,7
[1.30] [.58] MTG PADS 33,0 14,7
21,6
21,6 OPERATING [1.30] [.58]
[.85]
MTG PADS [.85] POINT OPERATING
39,6 POINT 39,6
[1.56] [1.56]
59,4 59,5
75,8 70,4
[2.34] 89,7 [2.34]
[2.98] [2.77] 82,6
[3.53]
[3.25]
CONDUIT OPENING
LOCATION 29,4
[1.16] CONDUIT OPENING 29,4
20,3 LOCATION [1.16]
[.80] 41,1 47,8
36,6 [1.62] 21,3
[1.88]
[1.44] [.84]
2X 5,2 [.20] Ø MTG HOLES
38,1
39,0 [1.50]
[1.54] 2X 10-32 UNF
44,4 2X 10-32 UNF TAPPED FROM REAR ONLY
TAPPED FROM REAR ONLY 45,3
[1.75] [1.78]
2X 5,2 [.20] Ø MTG HOLES
8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH
Figure 18. MICRO SWITCH HDLS LSF Series side roller plunger Figure 19. MICRO SWITCH HDLS LSF Series side roller plunger
(single pole) dimensions (double pole) dimensions
59,5
74,9 59,4 89,7 [2.34]
[2.95] [2.34] 70,4 82,6
[3,53]
[2.77] [3.25]
CONDUIT OPENING
CONDUIT OPENING 29,4 LOCATION 29,4
LOCATION [1.16] [1.16]
16,5
[.65] 41,1 47,8
[1,62] 18,8 [1.88]
25,4 [.74]
[1.00] 26,4 2X 10-32 UNF
39,1 2X 5,2 [.20] Ø MTG HOLES [1.04] TAPPED FROM REAR ONLY
38,1
[1.54] [1.50]
44,4 2X 10-32 UNF 2X 5,2 [.20] Ø MTG HOLES
TAPPED FROM REAR ONLY 45,3 9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH
[1.54]
[1.78]
DIMS: MM
[IN]
LSF
SPDT SPDT PLUG-IN
Non-plug-in PRODUCT DIMENSIONS
(mm[in]) LSF DPDT
DPDT PLUG-IN PRODUCT
Non-plug-in (mm[in])DIMENSIONS
(FOR REFERENCE ONLY) (FOR REFERENCE ONLY)
44,2 44,2
[1.74] 14,7 [1.74]
OPERATING [.58] OPERATING
21,6 POINT POINT
[.85] 39,6 MTG PADS
MTG PADS 12,7 [1.56] 14,7
[.50] 21,6 [.58]
ROLLER 4,8 12,7
[.85]
DIAMETER [.19] [.50] 39,6
ROLLER DIAMETER [1.56]
20,3
[.80] 19,0 31,5 4,8
[1.24] 20,3 [.19]
[.75] [.80]
19,0 31,5
25,4 [.75] [1.24]
[1.00] n 25,4
[1.00]
CONDUIT OPENING
LOCATION 29,4
[1.16]
20,3
[.80] 41,1 CONDUIT OPENING
[1,62] LOCATION 29,4
36,6 [1.16]
[1.44] 2X 5,2 [.20] Ø MTG HOLES 21,3
39,0 [.84] 47,8
[1.54] [1.88]
2X 10-32 UNF 38,1
44,4 [1.50]
[1.75] TAPPED FROM REAR ONLY 45,3 2X 10-32 UNF
[1.78] TAPPED FROM REAR ONLY
26 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
Figure 20. MICRO SWITCH HDLS LSW Series side adjustable Figure 21. MICRO SWITCH HDLS LSW Series side adjustable
plunger (single pole) dimensions plunger (double pole) dimensions
Ø 25,4
Ø 25,4
[1.00]
[1.00]
7,9
[.31]
7,9 ACROSS
74,9 59,4 59,4
[.31] FLATS
[2.34] 70,4 89,7 [2.34]
[2.95] ACROSS 82,6
FLATS [2.77] [3.53]
[3.25]
29,4
CONDUIT OPENING [1.16]
LOCATION CONDUIT OPENING
16,5 LOCATION 29,4
[.65] 41,1 [1.16]
[1.62]
25,4 18,8
47,8
[1.00] [1.88]
[.74]
39,0 26,4
[1.54] 2X 5,2 [.20] Ø MTG HOLES 2X 10-32 UNF
[1.04]
38,1 TAPPED FROM REAR ONLY
44,5 2X 10-32 UNF
[1.75] [1.50]
TAPPED FROM REAR ONLY 2X 5,2 [.20] Ø MTG HOLES
45,3 9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH
[1.78]
DIMS: MM
[IN] DIMS: MM
[IN]
LSW SPDT PLUG-IN PRODUCT DIMENSIONS LSW DPDT PLUG-IN PRODUCT DIMENSIONS
(FOR REFERENCE ONLY) (FOR REFERENCE ONLY)
LSW SPDT NON PLUG-IN PRODUCT DIMENSIONS LSW DPDT NON PLUG-IN PRODUCT DIMENSIONS
19,0 2X n 25,4
[.75] [1.00]
19,0 2X Ø 25,4
[.75] 119,1
[1.00] [4.69] 59,4
89,7 [2.34]
59,4 82,6
74,9 [3.53]
[2.34] 70,4 [3.25]
[2.95] [2.77]
CONDUIT OPENING
LOCATION 29,4
29,4 [1.16]
CONDUIT OPENING [1.16]
LOCATION 47,8
16,5 18,8 [1.88]
[.65] 41,1 [.74]
25,4 [1.62] 26,4 2X 10-32 UNF
[1.04] TAPPED FROM REAR ONLY
[1.00] 38,1
39,1 [1.50] 2X 5,2 [.20] Ø MTG HOLES
[1.54] 2X 5,2 [.20] Ø MTG HOLES
45,3 9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH
44,5 2X 10-32 UNF [1.78]
[1.75] TAPPED FROM REAR ONLY
25,4 2X Ø 25,4
19,0 19,0
[1.00] [.75] [1.00]
[.75]
101,7
119,1
[4.0] 75,8 [4.69] 59,4
[2.98] 59,4
70,4 89,7 [2.34]
[2.34] 82,6
[2.77] [3.53]
[3.25]
20,3 29,4
[.80] [1.16] 21,3 29,4
[.84] [1.16]
36,6 38,1
[1.44] 41,1 47,8
[1.62] [1.50] [1.88]
39,0
[1.54] CONDUIT OPENING
2X 5,2 [.20] Ø MTG HOLES LOCATION 45,3
CONDUIT OPENING 44,4 [1.78] 2X 10-32 UNF
LOCATION [1.75] TAPPED FROM REAR ONLY
2X 10-32 UNF
TAPPED FROM REAR ONLY 2X 5,2 [.20] Ø MTG HOLES
8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH
28 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
Table 11. Wobbles • MICRO SWITCH HDLS Series Order Guide/Recommended Listings
LSJ Series LSJ Series LSJ Series LSK Series
7A Actuator 7N Actuator 7M Actuator 8A-8C Actuator
Plastic rod lever Flexible cable lever Spring wire lever - Cat whisker actuator for low
Description (wobble stick) may be formed for operating force applications
special needs
Snap Action
1NO/1NC
Snap Action
1NO/1NC
Snap Action -8A** -8C
1NO/1NC
Snap Action Snap Action
3 4 3 4 3 4 1NO/1NC 1NO/1NC
1 2 1 2 1 2 3 4
3 4
1-2
3-4
3-4
1-2
1-2
3-4
3-4
1-2
1 2
1-2
3-4
3-4
1-2
0° 1 2
0°
0°
1-2
3-4
3-4
1-2
1-2
3-4
3-4
1-2
8° 0° 0°
12°
16° 10°
20° 16°
20° 15°
25° 25°
Snap Action Snap Action
Snap Action Snap Action Snap Action
2NO/2NC 2NO/2NC
2NO/2NC 2NO/2NC 2NO/2NC
Contact closed n 3 4 3 4
3 3 3 4
Contact open o 4
1 2
4
1 2
1 2
1 2 1 2
7 7 7 8
7 8 7 8
8 8 5
5 5 6 6
5 6 5
6 6
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6
1-2/5-6
3-4/7-8
3-4/7-8
1-2/5-6 0° 0°
0°
0° 0°
10°
8° 15°
12° 16°
20° 16° 25° 25°
20°
Lever length 8A act.: 140 mm [5.5 in] SST
Actuator: Actuator: Actuator:
from top mount- 8C act.: 140 mm [5.5 in]
140 mm [5.5 in] 140 mm [5.5 in] 330 mm [13 in]
ing hole steel plated
Pretravel 25,4 mm [1.0 in] 38,0 mm [1.5 in] 102 mm [4.0 in] 51,0 mm [2.0 in]
LSJ1A-7A LSJ1A-7M LSJ1A-7N LSK1A- LSK1A- Oper. force 2,78 Nm [10 oz] 1,95 Nm [7 oz] 1,39 Nm [5 oz] 8A: 1,39 Nm [5 oz];
- Plastic - Spring - Flexible 8A - Cat 8C - Coil 8C: 1,95 Nm [7 oz]
rod wire actuator whisker spring
Op. temp range3 -12°C to 93°C [10°F to 200°F] (for low temp, high temp, or preleaded versions, see pages 8-9)
Circuitry Contacts Body Style 2
Conduit Options
(NPT)
Silver Plug-in 0.5 in LSJ1A-7A LSJ1A-7N LSJ1A-7M LSK1A-8A LSK1A-8C
Gold4 Plug-in 0.5 in LSJ1E-7A – LSJ1E-7M LSK1E-8A LSK1E-8C
SPDT
Silver Plug-in 0.5 in LSJ6B-7A LSJ6B-7N LSJ6B-7M LSK6B-8A LSK6B-8C
DPDT
Figure 24. MICRO SWITCH HDLS LSJ_ _-7A Series wobble Figure 25. MICRO SWITCH HDLS LSJ_ _-7A Series wobble
(single pole) dimensions (double pole) dimensions
23,6 39,6
[1.56] 21,6 [1.56]
14,7 14,7
21,6 [.85] Ø 6,4 [.58]
[.85] [.58]
Ø 6,4 [.25]
[.25]
139,7
139,7 [5.50]
[5.50]
59,5
[2.34]
59,4 82,6
74,9 [2.34] 70,4 [3.25]
[2.77] 89,7
[2.95] [3.53]
139,7
[5.50]
139,7
[5.50]
59,5
[2.34]
89,7 82,6
59,4 [3.53] [3.25]
75,8 70,4
[2.98] [2.34]
[2.77]
29,4
29,4 CONDUIT OPENING [1.16]
CONDUIT OPENING [1.16] LOCATION
LOCATION 47,8
20,3 41,1 21,3
[.80] [1.88]
[1.62] [.84]
36,6
[1.44] 38,1
39,0 [1.50] 2X 10-32 UNF
2X 5,2 [.20] Ø MTG HOLES 45,3 TAPPED FROM REAR ONLY
[1.54]
44,4 [1.78]
[1.75] 2X 10-32 UNF 2X 5,2 [.20] Ø MTG HOLES
TAPPED FROM REAR ONLY 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH
DIMS: MM
DIMS: MM [IN]
[IN]
LSJ PLASTIC ROD DPDT NON PLUG-IN PRODUCT DIMENSIONS
(FOR REFERENCE ONLY)
LSJ PLASTIC ROD SPDT NON PLUG-IN PRODUCT DIMENSIONS
(FOR REFERENCE ONLY)
30 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
Figure 26. MICRO SWITCH HDLS LSJ_ _-7N Series wobble Figure 27. MICRO SWITCH HDLS LSJ_ _-7N Series wobble
(single pole) dimensions (double pole) dimensions
39,6 39,6
21,6 21,6
[1.56] [1.56]
[.850] [.85]
14,7 14.7
Ø 4,75 [.58] 6,4 [.58]
[.187] [.25]
139.7 139,7
[5.50] [5.50]
MTG PADS
15,2
15,2 63,5 [.60] 63,5
[.60] [2.50] [2.50]
MTG PADS
26,4
[1.04]
59,4 59,5
[2.34] 70,4 [2.34]
74,9 82,6
[2.77]
[2.95] [3.25]
89,7
[3.53]
29,4
CONDUIT OPENING [1.16] CONDUIT OPENING
LOCATION LOCATION
16,5 29,4
[.65] 41,1 [1.16]
[1.62] 18,8
25,4
[1.00] [.74] 47,8
39,0 26,4 [1.88]
[1.54] 2X 5,2 [.20] Ø MTG HOLES [1.04] 2X 10-32 UNF
38,1
TAPPED FROM REAR ONLY
44,5 [1.50]
2X 10-32 UNF
[1.75] TAPPED FROM REAR ONLY 45,3 2X 5,2 [.20] Ø MTG HOLES
[1.78] 9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH
DIMS: MM
[IN] DIMS: MM
[IN]
LSJ FLEXIBLE CABLE SPDT PLUG-IN PRODUCT DIMENSIONS LSJ FLEXIBLE CABLE DPDT PLUG-IN PRODUCT DIMENSIONS
SPDT Non-plug-in
(FOR REFERENCE ONLY) DPDT Non-plug-in
(FOR REFERENCE ONLY)
(mm[in]) (mm[in])
39,6
21,6 39,6 [1.56]
[.850] [1.56] 14,7 21,6 14,7
[.58] [.85] 6,4 [.58]
Ø 4.75 [.25]
[1.87]
139,7
[5.5]
139,7
[5.50]
MTG PADS
63,5
[2.50]
15,2
[.60] 63,5 26,4
MTG PADS [1.04]
[2.50]
59,4
89.7 [2.34]
82,6
[3.53]
[3.25]
75,8 59,4
[2.34] 70,4
[2.98] [2.77]
CONDUIT OPENING
LOCATION 29,4
[1.16]
CONDUIT OPENING 29,4
LOCATION 21,3 47,8
[1.16]
[.84] [1.88]
20,3 41,1
38,1
[.80] [1.62] [1.50] 2X 10-32 UNF
36,6 45,3 TAPPED FROM REAR ONLY
[1.44] [1.78]
2X 5,2 [.20] Ø MTG HOLES
39,0 2X 5,2 [.20] Ø MTG HOLES
[1.54] DIMS: MM 8,0 [.32] Ø C'BORE X 7,8 [.31] DEPTH
2X 10-32 UNF
44,4 TAPPED FROM REAR ONLY [IN]
[1.75]
DIMS: MM
[IN]
LSJ FLEXIBLE CABLE DPDT NON PLUG-IN PRODUCT DIMENSIONS
(FOR REFERENCE ONLY)
330,2
[13.00]
66,8
330,2
15,2 [2.63]
[13.00]
[.60]
26,4
[1.04]
59,5
[2.34]
82,6
[3.25]
74,9 59,4
[2.34] 70,4 89,7
[2.95] [2.77] [3.53]
2,0 21,6
[.08] 21,6 [.85]
21,6
[.85] [.85] 39,6
21,6
39,6 [1.56]
[.85]
[1.56]
330,2
330,2 [13.00]
[13.00] 66,8
66,8 MTG PADS [2.63]
[2.63] 15,2
MTG PADS 15,2
[.60] [.60]
26,4
26,4 [1.04]
[1.04]
59,5
[2.34]
75,8 59,4 89,7 82,6
[2.98] [2.34] 70,4 [3.53] [3.25]
[2.77]
32 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
Figure 31. MICRO SWITCH HDLS LSK_ _-8A Series wobble
Figure 30. MICRO SWITCH HDLS LSK_ _-8A Series wobble
(double pole) dimensions
(single pole) dimensions
1,3 39,6 Ø1,3 39,6
[.05] [1.56] [.05] [1.56]
14,7
21,6 [.58] 14,7
[.85] 21,6 [.58]
[.85]
139,7
[5.50]
139,7
[5.50]
MTG PADS
15,2 15,2
[.60] 65,0 [.60] 65,0
[2.56] [2.56]
26,4 MTG PADS 26,4
[1.04] [1.04]
29,4
CONDUIT OPENING [1.16]
LOCATION CONDUIT OPENING
41,1 29,4
16,5 LOCATION
[1.62] [1.16]
[.65] 18,8
25,4 [.74] 47,8
[1.00] 26,4 [1.88]
39,0 2X 5,2 [.20] Ø MTG HOLES [1.04]
[1.54] 38,1 2X 10-32 UNF
44,5 2X 10-32 UNF [1.50] TAPPED FROM REAR ONLY
[1.75] TAPPED FROM REAR ONLY 45,3
[1.78] 2X 5,2 [.20] Ø MTG HOLES
9,5 [.37] Ø C'BORE X 7,8 [.31] DEPTH
DIMS: MM
[IN]
LSK
SPDTCATNon-plug-in
WHISKER SPDT PLUG-IN PRODUCT DIMENSIONS DPDT Non-plug-in
(FOR REFERENCE ONLY) LSK CAT WHISKER DPDT PLUG-IN PRODUCT DIMENSIONS
(mm[in]) (mm[in])
Ø1,3
(FOR REFERENCE
Ø1,3
ONLY)
[.05] [.05] 39,6
39,6
[1.56]
[1.56] 21,6
21,6 14,7 14,7
[.85] [.58] [.85] [.58]
139,7
139,7 [5.50]
[5.50]
59,5
89,7 [2.34]
59,4 70,4 82,6
[3.53]
[2.34] [2.77] [3.25]
75,8
[2.98]
140
140 [5.50]
[5.50]
59,5
[2.34]
59,4 82,6
74,9 [2.34] 70,4 [3.25]
[2.95] [2.77]
89,7
[3.53]
DIMS: MM
[IN]
LSJ SPRING WIRE DPDT PLUG-IN PRODUCT DIMENSIONS
SPDT Non-plug-in DPDT Non-plug-in
LSK COIL SPRING SPDT PLUG-IN PRODUCT DIMENSIONS (FOR REFERENCE ONLY)
(mm[in]) (FOR REFERENCE ONLY) 39,6
(mm[in]) 39,6
21,6 21,6 [1.56]
[.850] [1.56]
[.850] 14,7
14,7 Ø 6.35
Ø 6,35 [.25] [.58]
[.58]
[.25]
140 140
[5.50] [5.50]
59,5
75,8 59,4 [2.34]
[2.34] 70,4 82,6
[2.98] [2.77] [3.25]
89,7
[3.53]
0.75 in conduit
0°
LSQ052 Double pole, plug-in, 0.75
in conduit 9°
17°
75°
LSQ053 Single pole, non-plug-in,
1-2
3-4
3-4
1-2
0.5 in conduit 0°
75°
LSZ616 Replacement lever for above listings
Pretravel 17° max.
Diff. travel 8° max.
Overtravel 58° min.
Oper. torque 0,45 Nm [4 in-lb] max.
Action CW and CCW (spring return)
SPECIAL APPLICATIONS
Gravity Return Side Rotary Switches (LSS) Extra Low Torque Side Rotary Switches (LST)
LSS1H gravity-return, side-rotary switches have no return LST1H extra-low torque, side-rotary switches have a low force
spring mechanism. The weight of the actuating lever must pro- return spring and a maximim operation torque of 12 in-oz. It is
vide the force to restore it to the free position. The 5 in-oz. max. rated as NEMA 1 due to an unsealed head. The switch cavity is
operating torque is useful in conveyor applications since it sealed to protect the switch contacts.
enables operation by small or lightweight objects. Because the
head is unsealed, the LSS1H is classified as NEMA 1. However, LST1H
the switch cavity is sealed to protect the switch contacts. Description Extra-low torque side rotary
Circuitry SPDT, double break
LSS1H
1-2
3-4
3-4
1-2
Contacts Silver
0°
Description Gravity-return side Sealing NEMA 1
rotary 10°
Electrical rating (B) NEMA B600 15°
Circuitry SPDT, double break
Body style Plug-in
Contacts Silver
Conduit (NPT) 0.5 in
Sealing NEMA 1
Pretravel 15° max.
Electrical rating (B) NEMA B600
Differential travel 5° max.
Body style Plug-in
Overtravel 60’ min.
Conduit (NPT) 0.5 in
Total travel 75° nom. 75°
Differential travel 12° max.
Operating torque 0,085 Nm [12 in-oz] max.
Total travel (no stop)* 360°
NOTE: Same polarity each pole.
Operating torque 0,035 Nm [5 in-oz]
max.
* Switch has approximately 180° dwell of the
normally closed and normally open switch contacts.
NOTE: Same polarity each pole.
36 sensing.honeywell.com
MICRO SWITCH Heavy-Duty Limit Switch, HDLS Series
ALSO AVAILABLE
Fully potted MICRO SWITCH HDLS heavy-duty limit switches provide an extra degree of protection in
harsh environments by sealing the basic switch cavity with epoxy. These switches are the same as the non-
plug-in HDLS except that the entire switch cavity is filled with epoxy in addition to the conduit entrance. The
fully potted HDLS switches are pre-leaded, with either cable or connectors.
• Excellent sealing capability for harsh-duty food and beverage wash downs and severe machine tool envi-
ronments
• Diaphragm sealing
• 12 inch STOOW-A cable (other lengths available) or connector version
• Cable versions: NEMA 1, 6, 6P, 12
• Connector versions: NEMA 1, 6, 6P, 12, 13
• All fluorocarbon seals (low temperature fluorosilicone seals available)
• UL, CSA, CE, CCC
MICRO SWITCH HDLS switches are also available in all stainless-steel versions. Designed for use in
highly corrosive environments, such as petrochemical plants, food processing plants, shipboard, and dock-
side locations. The type 316 cast stainless steel body is designed to minimize crevices where food particles
could become trapped in water. The actuator, operating head, and screws are also stainless steel. All seals
are fluorocarbon to provide excellent chemical resistance and to withstand operating temperatures up to
121°C [250°F] and pressurized steam cleaning. Pre-leaded and epoxy-filled versions also available.
Warranty/Remedy
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship during the appli-
cable warranty period. Honeywell’s standard product warranty
applies unless agreed to otherwise by Honeywell in writing;
please refer to your order acknowledgement or consult your
local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge
those items that Honeywell, in its sole discretion, finds defec-
tive. The foregoing is buyer’s sole remedy and is in lieu of all
other warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special,
or indirect damages.
Authorized Distributor
Honeywell:
LS4D3K LSJ7L-7A LSK7L-8C LSW4L LSC3K LSC4L LSC7L LSF3K LSF4L LSF7L LSF7L4 LS3D3K LS4C3K
LSD3K LSD4L LSD7L LSJ3K-7A LSJ3K-7M LSJ3K-7N LSJ7L-7M LSJ7L-7N LSE3K LSE4L LSE7L LSK3K-8A
LSK3K-8B LSK3K-8C LSK4L-8C LSK7L-8A LSV3K LSV4L LSV7L LSW3K LSW7L LS3A3K LSA3K LSA3N
LSA4L LSA7L LS4A3K LSA4S LSH3K LSH4L LSH7L LSP3K LSP4L LSP7L LSN3K LSN3N LSN4L LSN7L
LSR3K LSR4L LSR7L LSB3K LSB7L LSL4M LSL7M LSM4N LSM7N LSU3K LSU4L LSYAB3K LSYAB4L
LSYAB7L LSYAC3K LSYAC3N LSYAC4L LSYBB3K LSYCC3K LSYCC4L LSYCC7L LSYDB3K LSYDB4L
LSYDB7L LSYDC3K LSYFB4L LSYFC3K LSYFC7L LSYHC3K LSYJB3K-7M LSYJB3K-7N LSYKB3K-8C
LSYKB4L-8C LSYKB7L-8C LSYLB7M LSYMB4N LSYMB4N-2K LSYMB7N LSYMC4N LSYMC7N LSYNB3K
LSYNB4L LSYPB3K LSYPB4L LSYPB7L LSYRC4L LSYVC7L LSYWB3K LS3A3K-7AA