Professional Documents
Culture Documents
Granite EPIK Data Sheet
Granite EPIK Data Sheet
Granite EPIK
Granite EPIK offers a POTS alternative that is fully compatible with alarm, POS, and voice lines, and provides
savings along with the best service in the industry. Our patented technology is delivered over the 4G LTE
network, with intelligent failover to internet or PRI connections for redundancy. Granite EPIK offers universal
US availability, even at locations no longer served by traditional copper circuits.
Based on a Class 5 Softswitch, the Granite EPIK device fully emulates a central office, delivering service quality
and reliability – and allowing alarm providers a code-compliant network handoff for existing fire or intrusion panels
and enabling compliance with both HIPAA and PCI standards.
866-847-1500 epik.granitenet.com
V8_0922
Data Sheet • Granite EPIK
Solution capabilities
Traditional analog line compatibility
866-847-1500 2
V8_0922
Data Sheet • Granite EPIK
Front
Granite EPIK Gen3
5 6
1 2
Back
Granite EPIK Gen3
WiFi
Grounding Antenna
RJ21 Connector Screw T1/E1 Ports Connector
NET 1 NET 2
T1 0/1 T1 0/2
PRI/CAS
VOICE / RJ21
ETH 0/3 SERIAL ETH 0/1 ETH 0/2 USB-2
120V AC USB-1
60HZ GIG E GIG E
AUX
866-847-1500 3
V8_0922
Data Sheet • Granite EPIK
Technical Specifications
Physical Interfaces
Dimensions 13.6" (L) x 6.44" (W) x 3.37" (H) Ports Male Amphenol RJ21 connector (up to 8 line FXO/
Height including cellular antennas: 8.75" FXS capable), direct punch down to 66 block or
Height including WiFi antennas: 9.25" 8 individual RJ11 jacks
Weight 8 lbs 3X 1 Gbps Ethernet (software configurable as
WAN or LAN ports)
Mounting Desk, wall/shelf or rack mounted (2U)
Male DB-9 serial port console connector
Case Black steel extrusion Grounding screw
Fanless, vented 2X PRI T1/E1, CAS/super trunk (optional)
CPU AMD Embedded, quad-core processor Optional 24 FXS ports
RAM 4 GB expansion unit
LEDs and Power indicator
Power notifications Internal battery “on” indicator
AC Input 120 VAC (front) Battery voltage indicator
AC Frequency 60 Hz EPI port status indicators (1, 2 or 4, depending on
model): power, internet, network activity,
AC Current 1.6 A
2X call ports
Internal battery 11.1 VDC
Switches Primary power (AC)
10400 mAh Lithium Ion
Field replaceable Battery power switch (DC)
24 hours standby usage Analog device Voice, fax, alarm line, SCADA, modem, DTMF
8 hours under full line usage compatibility
Battery alarm Integrated low battery and no charge alert and Security and encryption
notification
IoT firewall Yes, stateful
UPS system Supports UPS extended battery backup
End-to-edge Yes
Environmental voice encryption
Operating -20° C to +70° C (-4° F to +158° F) Signaling Proprietary
temperature Integrated environmental alert and notification protocol
Storage -20° C to +85° C (-4° F to +185° F) VLAN capable Yes
temperature
Regulatory and compliance approvals
Operating 20% to 90% non-condensing
humidity •P ermitted under NFPA 72 (National • Approved for other Fire/
Fire Protection Association) for fire Life Safety applications,
Radios alarms as a Managed Facility-based including elevators,
Voice Network (MFVN) escalators and other
WiFi Dual WiFi antennas (removable, SMA connector) alarm systems*
• Listed and approved for use as
WiFi 2.4 GHz (802.11 b/g/n, MIMO 300 Mbps) as MFVN by California State • HIPAA and PCI compliant
WiFi 5 GHz (802.11 a/an/ac, MIMO 867 Mbps) Fire Marshal • RoHS
Cellular LTE Dual 4G antennas (removable, SMA connector) • Tested extensively and accepted • UL 62133;
Dual SIM slots (Micro SIM 15 mm x 12mm 3FF) by leading fire and burglar panel UL 62368
Dual path capable manufacturers
LTE CAT 4, CAT 6 (optional), 5G-capable
Verizon and T-Mobile networks Included accessories
QoS protocol enables priority access to private • North America power cord • 10' Amphenol RJ21 cable
4G networks • Wall mount screw pack • 66 block and brackets
LTE Bands: • Rubber feet for desktop • Installation guide
-F DD B2[1900], B4[1700], B5[850], B12[700], mounting
B13[700], B14[700], B66[1700], B71[600]
- DC-HSPA+ Optional accessories
• Rack mounted kit
All specifications subject to change Country of origin Patent status
*Some jurisdictions may require wireline connections for certain applications Assembled in USA US Patent 10,986,555
(Fire/Life Safety), and wireline connections may be necessary to furnish service
(filed September 25, 2019;
at some locations.
issued April 20, 2021)
866-847-1500 4
V8_0922