Professional Documents
Culture Documents
Brochure Specificatitions (KS EN050)
Brochure Specificatitions (KS EN050)
HYDRAULIC EXCAVATOR
Engine Gross Power : 1 450 kW (1 944 HP)
Operating Weight : EX3600-6
Loading Shovel : 361 000 kg
Backhoe: 359 000 kg
Loading Shovel Bucket : PCSA (2:1) Heaped : 21.0 m3
23.0 m3
Backhoe Bucket : PCSA (1:1) Heaped : 22.0 m3
CECE (2:1) Heaped : 19.2 m3
SPECIFICATIONS
EX3600-6
SPECIFICATIONS
Tracks Loading Shovel Boom and arm are of all-welded, low-stress, high-tensile strength steel full-
Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame Equipped with 21.0 m3 (PCSA heaped) bottom dump bucket box section design. Efficient, automatic level crowding achieved by one-
and X-form center frame assures durability. Heavy-duty track frame Shoe Shoe Width Operating weight Ground pressure lever control because parallel link mechanism keeps the bucket digging
of all-welded, stress-relieved structure. Top-grade materials used for Triple 189 kPa angle constant, and level cylinder circuit maintains the bucket height
toughness. Lifetime-lubricated induction-hardened track rollers, idlers 1 270 mm 361 000 kg constant. (Auto-Leveling Crowd Mechanism)
grousers (1.93 kgf/cm2)
and drive tumblers with floating seals. Specially heat-treated connection
pins. Hydraulic track adjuster provided with N2 gas accumulator and Bucket (PCSA heaped 2:1 angle of repose)
relief valve. Track adjuster provided with protection device against Backhoe
abnormal tension. Travel motion alarm device.
3
Equipped with 9.6 m BE-boom, 4.5 m BE-arm and 22.0 m (PCSA Capacity Width No.of teeth Weight Type Materials density
heaped) bucket 21.0 m3 4 160 mm 6 26 900 kg 1 800 kg/m3
Shovel-type Undercarriage Shoe type Shoe Width Operating weight Ground pressure 23.0 m3 4 160 mm 6 27 300 kg 1 600 kg/m3
Triple grouser shoes of induction-hardened cast steel. Triple 188 kPa
Shoe width ............................................................................ 1 270 mm 1 270 mm 359 000 kg
grousers (1.92 kgf/cm2) WORKING RANGES
Numbers of Rollers and Shoes on Each Side
Upper rollers ....................................................................................... 3 SERVICE REFILL CAPACITIES
Lower rollers ....................................................................................... 8
Track shoes ...................................................................................... 38
liters
Fuel tank 7 450
Traction Device
Each track driven by high-torque, axial piston motors, allowing Engine coolant 614
counterrotation of tracks. 2-stage planetary gear plus spur gears Engine oil Engin oil pan 261
reduction device. Dual-support-type traction device. Parking brake of Reserve tank 284
spring-set/hydraulic-released disc type. This parking brake is manually Pump transmission device 52
releasable. Swing reduction device 4 x 75
Travel reduction device 2 x 220
Travel speeds ........................................................ High : 0 to 2.2 km/h Hydraulic system 4 000
Low : 0 to 1.7 km/h Hydraulic tank 1 900
Maximum traction force .................................... 1 760 kN (179 500 kgf) Unit: mm
Gradeability .................................................................. 30˚ (60 %) max. A Min. digging distance 5 850
B Min. level crowding distance 8 870
C Level crowding distance 5 050
D Max. digging reach 15 220
E Max. cutting height 16 300
E’ Max. dumping height 10 990
F Max. digging depth 3 910
Working radius at max.
G 8 650
dumping height
H Max. bucket opening width 1 950
1 200 kN
Arm crowding force (SAE)
(122 000 kgf)
1 130kN
Breakout force (SAE)
(115 000 kgf)
SPECIFICATIONS / EQUIPMENT
BACKHOE ATTACHMENTS STANDARD EQUIPMENT Standard equipment may vary by country, so please consult your Hitachi dealer for details.
Boom and arm are of all-welded, low-stress, full-box section design. ENGINE MONITOR SYSTEMS
Bucket of all-welded, high-strength steel structure. • 140 A alternator • Meters:
• Heavy-duty type air cleaner with dust Hourmeter. Fuel gauge. Hydraulic oil DATA LOGGING SYSTEM
ejector temperature gauge. Engine coolant • DLU (Data-logging unit) continuously
Bucket temperature gauge. Tachometer. records performance of the engine and
• Cartridge-type engine oil filter
Capacity Width • Cartridge-type engine oil bypass filter Engine oil pressure gsuge.Engine oil the hydraulic system. The record can be
No.of Materials
PCSA CECE Without With Weight Type • Cartridge-type fuel filter temperature gauge. downloaded by PC and PDA.
teeth density
heaped heaped side cutters side ctters • Fan guard Battery voltage gauge. Ambient
22.0 m3 19.2 m3 3 790 mm - 6 18 400 kg 1 800 kg/m3 • Isolation-mounted engine temperature. LIGHTS
• Auto-idle system • Pilot lamps (Green): • 9 working lights. 2 entrance lights.
General purpose bucket Prelub. Auto-Idle. Travel Mode.
• Emergency engine stop system 7 maintenance lights. 2 cab lights.
• Hydraulic drive cooling-fan system
• Warning lamps (Red): UPPERSTRUCTURE
WORKING RANGES Allternator. Engine stop. Coolant • Lockable machine covers
HYDRAULIC SYSTEM
overheat. Hydraulic oil level. Auto- • 40 200 kg counterweight
• E-P control system
Lubrication. Fast-filling. Tension. Electric • Hydraulic drive grease gun with hosereel
• OHS (Optimum Hydraulic System)
lever. Emergency engine stop. Top • Retractable ladder with
• FPS (Fuel-saving Pump System) valve. Engine over run. Coolant level.
Unit: mm • Hydraulic drive cooling-fan system springtypebalancer
Engine oil pressure. Pump transmission • Swing parking brake
BE-boom length 9.6 m • Forced-lubrication and forced cooling oil level indicator.
pumpdrive system
BE-arm length 4.5 m UNDERCARRIAGE
• Control valve with main relief valve • Warning lamp (Yellow):
A Max. digging reach 18 190 • Travel parking brake
• Suction filter Exhaust temperature. Fuel temperature.
A' Max. digging reach (on ground) 17 600 • Full-flow filter • Travel motion alarm device
Engine warning. Hydraulic oil overheat.
B Max. digging depth 8 580 • Bypass filter • Hydraulic track adjuster with N2
Stairway position. Electlical equipment
B' Max. digging depth (8' level) 8 490 • Pilot filter box. Pump contamination. Air cleaner gasaccumulator and relief valve
C Max. cutting height 17 690 • Drain filter restriction. • 1 270 mm triple grouser shoes
D Max. dumping height 11 590 • High-pressure strainer
E Max. vertical wall 4 060 • Alarm buzzers: MISCELLANEOUS
1 050 kN CAB Overheat. Engine coolant pressure. • Standard tool kit
Bucket digging force ISO Engine coolant level.Fuel temperature. • Stairs and handrails (Meeting ISO)
(107 000 kgf) The sturdy cab, with the top guard
932 kN conforming to OPG Level (ISO), helps Engine oil pressure.Engine oil • Recirculation air filter for air conditioner
Bucket digging force SAE: PCSA protect the operator from falling objects. temperature. Air intake manifold • Ventilation air filter for air conditioner
(95 000 kgf)
Fulid-filled elastic mounts. temperature. Crank case pressure. • 12 V power terminal board
951 kN
Arm crowd force ISO Laminated glass windshield. Reinforced/ Pump transmission oil level.Hydraulic oil • Stop valve for transport and reassem-
(97 000 kgf)
tinted (bronze color) glass side and rear level. Stop valve close. Fast-fill system bly
922 kN
Arm crowd force SAE: PCSA windows. Parallel-link-type intermittent panel position(option) Ladder position. • Auto-lubrication system (Lincoln) for
(94 000 kgf)
windshield wiper. Front windshield Electric lever fault. front-attachment pins, swing bearing,
washer. Adjustable reclining seat with and center joint
air suspention. Footrest. Air horn with
electric compressor. Auto-tuning AM-FM
radio with digital clock. Seat belt. Storage
spaces. Floor mat. Air conditioner with
defroster. Rearview mirror. Evacuation
hammer. Emergency escape device.
Trainer's seat. Pilot control shut-off lever.
OPTIONAL EQUIPMENT Optional equipment may very by country, so please consult your Hitachi dealer for details.
• wiggins couplers • Satellite data transmitting system.
• High brightness working lights. • Travel motor guard.
• Back and right side color monitor camera. • Travel device guard.
• Electric oil pump to draw hydraulic oil from suction and
return pipe lines.
TRANSPORTATION
3 190
2 510
2 130
2 830
2 130
1 660 1 860 2 000
2 520
1 290
1 290
1 290
1 290
3 140 5 050 2 580
Wt=1740kg
Width : 1 880 Width : 409 Width : 407 Width : 709 Width : 682 Sidewalk Sidewalk Sidewalk Sidewalk Hose reel
Weight : 250 kg Weight : 223 kg Weight : 254 kg Weight : 184 kg Weight : 50 kg
Sidewalk Handrail Handrail Bed (left) assembly 2 010 2 430 1 695
Weight : 82 kg Weight : 6 kg Weight : 22 kg Weight : 8 460 kg
729
1 810
1 460
2 146
1 810
1 810
560
409
3 190
1 290
710
2 460
2 030
1 670
312
1 090
1 020
1020
1 020
2 170
1 810
1 280
1 280
1 960 2 600
2 210
Width : 400 Width : 97 Width : 97 Width : 285 Width : 223 Width : 285
Width : 560 Width : 419 Width : 364 Width : 682 Width : 833
335
2 510
364
3 380
3 250
1 700
610
580
290
563 1050 865 865
2 560
8 940
Width : 422 Width : 342 Width : 290 Width : 290 Width : 2 590
Width : 250 Width : 820 Width : 3 510
TRANSPORTATION
Unit: mm Unit: mm
Aircleaner and muffler Suction manifold Reserve tank Bracket Bracket Counterweight Reservetank ( engine oil )
Weight : 1 310 kg Weight : 422 kg ( coolant ) Weight : 13 kg Weight : 13 kg Weight : 40200 kg Weight : 155 kg
Weight : 118 kg
1 900 8 150 1 570
315 315
1 040
1 580
955
661
550
550
1 330 832
3 220
Width : 2 520 Width : 1 380 Width : 913 Width : 125 Width : 125 Width : 1 450 Width : 543
1 410
1 010
1 010
1 230
1 210
1 010
1 010
1 010
707
3 190 910 2 360 997 804
Width : 866 Width : 280 Width : 97 Width : 685 Width : 997 Width : 199 Width : 261 Width : 199 Width : 316
1310
1 010
1 020
529
1870
1 010
10 11
TRANSPORTATION
12 13
TRANSPORTATION / LIFTING CAPACITIES
BACKHOE ATTACHMENT
Unit: mm
A: Load radius
B: Load point height
C: Lifting capacity
METRIC MEASURE
Load radius
At max. reach
8m 10 m 12 m 14 m 15 m 16m
Load point
Conditions
height
m
14 15
These specifications are subject to change without notice.
Illustrations and photos show the standard models, and may or may not include optional equipment,
accessories, and all standard equipment with some differences in color and features.
Before use, read and understand the Operator’s Manual for proper operation.