Professional Documents
Culture Documents
CJ615-01 WPC R222.346.en-02
CJ615-01 WPC R222.346.en-02
346 en
SANDVIK CJ615:01
This document is valid for:
SANDVIK CJ615:01
© Copyright 2004 Sandvik SRP AB.
All rights reserved. No parts of this document may be reproduced or
copied in any form or by any means without written permission from
Sandvik SRP AB. All data and information in this manual may be
changed without further notice. Reservations for misprints.
Sandvik SRP AB
Stationsplan, SE-233 81 Svedala, Sweden
Tel: +46 40-40 90 00, Fax: +46 40-40 92 60
www.sandvik.com
Wear Parts Catalog
General
Ordering information
When ordering parts, always state the machine type and serial number
according to the identification plate on the jaw crusher. State quantity, article
number and denomination for each ordered part. (Quantities listed in this
catalog are number of parts that are usually exchanged at the same time in a
certain position or function.)
Identification plate
The figure below shows an example of the crusher’s identification plate. The
identification plate contains data needed when contacting Sandvik SRP AB
concerning wear parts.
Please enter the serial number of the associated machine in the intended field
on the first page of this wear part catalog (the copyright page).
1 2
1 Machine type
2 Serial number
Think ahead!
Avoid unnecessary downtime and increased freight charges by ordering parts
well in advance.
Adjustment shims
5002-0
1211-1 1211-0
1211-2 1210-0
1211-5
1211-6
1211-5
Stationary jaw
Cat. no. Qty. Part number Alternative Description Remarks
1210-0 2 402.5793-01 Clamping bar wear plate only
1211-0 4 650.0313-01 Screw M48×405
1210-0 2 402.4408-01 Clamping bar with jaw shim plate configuration
1211-0 4 650.0313-02 Screw M48×435
1211-1 8 845.0343-00 Nut M6M M48
1211-2 4 847.0026-00 Washer BRB 50×92
1211-5 8 402.3915-06 Washer D190/53×10
1211-6 4 650.0235-01 Flexible washer
3401-5
3401-6
3500-0 3401-5
3401-2
3401-0 3401-1
3400-0
Moving jaw
Cat. no. Qty. Part number Alternative Description Remarks
3400-0 2 402.2005-01 Clamping bar
3401-0 4 650.0314-97 Screw M48×1115
3401-1 8 845.0343-00 Nut M6M M48
3401-2 4 847.0026-00 Washer BRB 50×92
3401-5 8 402.3915-06 Washer D190/53×10
3401-6 4 650.0235-01 Flexible washer
3500-0 1 402.4500-00 Deflector plate
Jaw plates
1208-1
1209-1
1209-2 1208-2
1209-5 1209-0
1209-6
1209-5
Stationary jaw
Cat. no. Qty. Part number Alternative Description Remarks
1208-1 1 400.0485-001 CC, M1 Jaw plate coarse corrugated, material M1
400.0490-001 ST, M1 sharp teeth, material M1
2 400.0434-001 HD, M1 Jaw plates, top and bottom heavy duty, material M1
requires middle plate
400.0434-002 HD, M2 heavy duty, material M2
(Continued)
3301-5
3301-6
3300-1 3301-5
3301-2
3301-1
3300-2
3301-0
Moving jaw
Cat. no. Qty. Part number Alternative Description Remarks
3300-1 1 400.0488-001 CC, M1 Jaw plate coarse corrugated, material M1
400.0491-001 ST, M1 sharp teeth, material M1
2 400.0434-001 HD, M1 Jaw plates, top and bottom heavy duty, material M1
requires middle plate
400.0434-002 HD, M2 heavy duty, material M2
(Continued)
Coarse corrugated
CC
Sharp Teeth
ST
Wear plates
1300-0
3100-0
1303-3
1303-2
1303-0
1302-0
Support bars
Stationary jaw
Cat. no. Qty. Part number Alternative Description Remarks
1205-0 1 402.4386-01 Support bar wear plate only
1206-0 6 840.1117-00 Screw M6S 48×180 wear plate only
1205-0 1 402.4386-01 Support bar with jaw shim plate configuration
1206-0 6 840.1208-00 Screw M6S 48×240 with jaw shim plate configuration
1206-1 6 845.0274-00 Self-locking nut M48
1206-2 6 847.0026-00 Washer BRB 50×92
Moving jaw
Cat. no. Qty. Part number Alternative Description Remarks
3200-0 1 402.4386-01 Support bar
3201-0 6 840.1209-00 Screw M6S M48×320
3201-1 6 845.0274-00 Self-locking nut M48
3201-2 6 847.0026-00 Washer BRB 50×92
Cheek plates
1103-1 1103-2
1106-6
1106-2 1106-0
1106-1 1106-4
1106-5
1106-2
1106-1
Cheek plates
Cat. no. Qty. Part number Alternative Description Remarks
1103-1 1 402.4521-01 Cheek plate, upper left-hand side
1103-2 1 402.4522-01 Cheek plate, lower left-hand side
1104-1 1 402.4521-01 Cheek plate, upper right-hand side
1104-2 1 402.4522-01 Cheek plate, lower right-hand side
(Continued)
1106-7
1106-2
1106-5
1106-4
1106-3
1106-7
1106-3
Sign assembly
420
8 6
1000
9
1 3
2 7
5 4
2
1 3
9