Professional Documents
Culture Documents
007z en Userguide 05
007z en Userguide 05
Settings
Settings............................................................................................................................. 5-2
Overview........................................................................................................................ 5-2
WLAN & WAN Information.......................................................................................... 5-3
Advanced Settings......................................................................................................... 5-4
Changing Security....................................................................................................... 5-20
Internet Connectivity.................................................................................................. 5-21
Settings
Overview Activating SoftBank 007Z Utility
Use SoftBank 007Z Utility to change network settings, etc. Install 1 Power on computer and connect Wi-Fi router via
SoftBank 007Z Utility on a computer to use it. Micro USB Cable or WLAN
Connect Wi-Fi router to computer via Micro USB Cable or WLAN;
use utility software through web browser to change Wi-Fi router 2 On computer desktop, double-click
settings, etc. Browser activates and SoftBank 007Z Utility opens.
3 Change SoftBank 007Z Utility Interface
5 • Using SoftBank 007Z Utility to change Wi-Fi Settings while Wi-
To switch language to English, select 言語 → English.
Fi router is wirelessly connected to computer, may sever WLAN
4 Enter Administrator Password → Login
Settings
5-2
SoftBank 007Z Utility WLAN & WAN Information
cd e f g
h
i 1 In SoftBank 007Z Utility, click Home
j WLAN and WAN Information appears.
k
a
5
Settings
b
5-3
Advanced Settings 3G Settings
5
Settings
5-4
Network Operator APN Setting
Select Network Operator. Setting cannot be changed during Select Unlimited Data Discount Area or Sub Area profiles
Internet use. (connection settings). Create, edit and delete profiles.
Settings
1 Perform these steps for APN Setting for Unlimited
Data Discount Area, etc.:
■Create
■ New Profile
1 Set each item Click Add and proceed to Step 2.
■Delete
■ Profile
Item Used to Options Default In Profile Selection, select one and click Delete .
For Manual: Click ■Edit
■ Profile
Network Apply → Select Automatic, In Profile Selection, select one and proceed to Step 2.
Automatic
operator network operator → Manual • Default profiles/those in use cannot be edited/deleted.
Apply
2 For Unlimited Data Discount Area and Sub Area, set
each item and click Save
2 Click Apply
5-5
Item Used to Options Default Traffic Information
Save up to View data packets and connection times.
Profile Select profile to edit/ ten profiles
-
Selection delete including two
defaults
Alphanumerics
Enter optional profile
Profile Name /symbols -
name (initial setup)
(except \)
5
Alphanumerics/
Settings
symbols (. , -)
(. and - cannot
APN Set APN -
be used for
the first or last
characters)
Auto DNS,
DNS Set DNS Auto DNS
Manual DNS
DATA MAIN:
Set authentication CHAP, CHAP 1 View each item
Authentication
method PAP DATA SUB:
PAP Item Used to Options Default
5-6
2 Perform these operations Data Communication Area Setting
■Refresh
■ Traffic Information
These settings cannot be changed while Wi-Fi router is connected
Click Refresh .
to Internet.
• Data packets and connection time values are updated.
■Change
■ Traffic Information Units
In Unit Setting, click Byte /Packet → Apply .
• Unit is changed.
■Clear
■ Value
Check box next to item → Click Clear .
• Data packets or connection time values are cleared.
5
• Most recent and total connection times are reset to 0 if
Settings
power is turned off or Internet is disconnected from.
• To reset total transmitted data packets or total connection
times, reset values with these procedures or reset to
factory default.
2 Click Apply
5-7
Wi-Fi Settings Station List
View a list of WLAN MAC addresses connected to Wi-Fi router.
1 Click item to set/check
5
Settings
■Station List
■Basic (P.5-9)
■Security (P.5-10)
■WPS (P.5-11)
■MAC Filtering (P.5-12)
5-8
Basic Item Used to Options Default
Set basic settings for wireless network. Set Wi-Fi device
communication
option. Setting
AP Isolation Disabled Enable/Disable Disable
prevents file
sharing between
Wi-Fi devices
Frequency Specify frequency
5
Select from list Auto
(Channel) to select
Settings
Specify rate to
Rate Select from list Auto
select
Specify the
maximum
MAX Station
number of 1 to 10 10
Number
Wi-Fi devices to
connect
1 Set each item 1In these cases, 11n Only is unavailable.
Item Used to Options Default • WEP is set in Security.
• TKIP is set in WPA Algorithms.
Auto (11b/g/n),
Network Select operation • Security mode is set to WPA-PSK and WPA Algorithms is set to
11b Only, 11g Only, Auto (11b/g/n)
Mode mode for WLAN Auto.
11n Only1 2See WLAN Initialization Sticker for SSID and WEP key.
Available
• After completing settings, reconnect Wi-Fi devices.
characters: 32 007Z_
Network Set network • Wi-Fi communications cannot be used overseas.
alphanumerics/ ************
Name (SSID) name SSID
symbols (except " (MAC address)2
' < > & * ¥ , ; : [ ]) 2 Click Apply
Broadcast Set whether
Network Name to show access Enable/Disable Enable
(SSID) point
5-9
Security Item Used to Options Default
Set security settings for wireless network. Appears if Security Mode
is set to OPEN system.
Select Encrypt Type. WEP,
Encrypt Type WEP
Cannot be set to WEP NO ENCRYPTION
when Network mode
is 11n.
Appears if Security
5 mode is set to OPEN or
Default Key 1 to 4 1
SHARED. Set default
Settings
WEP key
Hex (64-bit key):
5 alphanumerics/
symbols (except , ":
; ¥ /), or 10-digit hex
Appears if Security number (0-9, A-F)
WEP Keys mode is set to OPEN or *
SHARED. Set WEP key ASCII (128-bit key):
13 alphanumerics/
1 Set each item symbols (except , " :
; ¥ /), or 26-digit hex
Item Used to Options Default number (0-9, A-F)
Select security mode. Appears if WPA-PSK, WPA-
The following cannot be WPA2-PSK, WPA-PSK/ PSK:
set when Network mode OPEN, SHARED, WPA2-PSK are selected. TKIP
Security is 11n. WPA-PSK, WPA2- Select encryption mode. WPA2-
OPEN The following cannot be PSK:
Mode • Security mode cannot PSK, WPA-PSK/ WPA
be set to WPA-PSK. WPA2-PSK set when Network mode TKIP, AES, Auto AES
Algorithms
• WPA Algorithms is 11n. WPA-
cannot be set to Auto. • TKIP PSK/
• Auto and Security WPA2-
mode cannot be set to PSK:
WPA-PSK. Auto
5-10
Item Used to Options Default WPS
Available Appears if PIN is selected. Set PIN for WPS compatible Wi-Fi
Appears if Security characters: 8-63 devices.
Mode is set to WPA-PSK, alphanumerics/
Pass Phrase WPA2-PSK, WPA-PSK/ symbols (except , " *
WPA2-PSK. Set WPA pre- : ; ¥ /), or 64-digit
shared key hex number (0-9,
A-F)
5
*See "Factory Default Settings" (iv).
Settings
2 Click Apply
2 Click Apply
• Wi-Fi router WPS function activates automatically. Connect
Connect WPS compatible Wi-Fi devices within two minutes.
5-11
MAC Filtering Firewall & Port Filtering Settings
Set up to ten MAC addresses.
1 Click item to set/check
5
Settings
5-12
IP/Port Filtering Item Used to Options Default
Set/apply rules whether to connect or not if setting IP addresses Default Policy -- The
and port numbers. packet that doesn't Set action for IP/ Accepted,
Accepted
match with any rules Port Filtering Dropped
would be:
Set destination IP Four sets of
Dest. IP Address address to apply numbers (0 to -
rules 255)
5
Set source IP Four sets of
Settings
Src. IP Address address to apply numbers (0 to -
rules 255)
Select protocols
Protocol TCP, UDP, ICMP TCP
that apply rules
Set destination 1 to 65535
port number or Link with “-”
Dest. Port Range -
range to apply when specifying
rules range
1 to 65535
Set source port
Link with “-”
Src. Port Range number or range -
when specifying
to apply rules
range
Select action to set
Action Drop, Accept Drop
rules
Enter comments
1 Set each item
Comment
regarding rules
Alphanumerics -
5-14
Advanced Status
View hardware information.
1 Click item to set/check
Settings
■Status (P.5-15)
■Management (P.5-16)
■Restore (P.5-16)
■PIN Management (P.5-17)
■Router (P.5-18)
■Sleep Settings (P.5-19)
5-15
Management Restore
Change SoftBank 007Z Utility default Administrator Password Reset all Wi-Fi router settings to their factory defaults.
("admin").
5
Settings
1 Click Restore
1 Enter current Password, new Password, then enter
2 Click OK to reset to factory defaults
new Password again for verification
Defaults are restored. Wi-Fi router automatically restarts and
Item Used to Options Default Login window opens. Log in to continue.
Available
characters:
alphanumerics/
Password - admin
symbols (except
"'<>&*¥,
; : [ ])
2 Click Apply
5-16
PIN Management ■Changing
■ PIN
Personal Identification Number (PIN) is USIM security code.
Change PIN, or Enable/Disable PIN Authentication to control USIM
access.
Settings
1 Select Modify → Enable
■To
■ Enable/Disable PIN Authentication
2 Set each item
Enable PIN Authentication, power on Wi-Fi router, then use Item Used to Options Default
SoftBank 007Z Utility to enter PIN.
Four to eight-
PIN Enter current PIN 9999
1 Select Enable/Disable from Action digit number
5-17
• SoftBank 007Z Utility required to change PIN. Disable PIN Router
operations for Wi-Fi devices other than computers. These settings cannot be changed while Wi-Fi router is connected
• Log into SoftBank 007Z Utility to enable PIN Authentication. to Internet.
PIN Authentication window appears: Enter PIN → Click Apply
• Incorrectly entering PIN three consecutive times activates PIN
Lock. PUK Code is required to unlock it. For details about PUK,
contact SoftBank Customer Support, General Information
(P.7-3). Entering PUK Code ten consecutive times locks
5 Wi-Fi router completely. If Wi-Fi router is completely locked,
predefined procedures are required. Contact SoftBank
Customer Support, General Information (P.7-3).
Settings
5-18
Item Used to Options Default Sleep Settings
Four sets of If ON, idle Wi-Fi router (no transmissions/battery charged) goes
numbers (0 to to sleep. Activate/cancel sleep mode; set sleep activation timer.
255)
• Starting address 1 Set each item
Set DHCP IP pool value must be
smaller than 192.168.3.2
starting address
DHCP IP Pool ending address to
and ending
address
• Do not include IP
address in pool
192.168.3.253
5
• Starting IP address
Settings
and ending IP
address must be in
LAN subnet pool
DHCP Lease Set IP address
1 to 65535 24
Time lease time
2 Click Apply
Item Used to Options Default
A confirmation appears.
ON/OFF Activate/cancel
ON/OFF ON
Setting sleep mode
Sleep Timer Set sleep mode
1/3/5/10/15 1
Setting(min) activation timer
1 Click Apply
5-19
Changing Security 3 Click Security
5
Settings
5-20
4 Open Security Mode menu to select security Internet Connectivity
• Select WPA-PSK, WPA2-PSK or WPA-PSK/WPA2-PSK.
Connection
Manage Internet connectivity manually via SoftBank 007Z Utility.
Settings
5 Set items as required
• See "Security" (5-10).
6 Click Apply
5-21
Data Roaming Setting
5
Settings
5-22