Professional Documents
Culture Documents
0025 MERCEDESBENZ ACTROS 1863 LS-iu2uio
0025 MERCEDESBENZ ACTROS 1863 LS-iu2uio
Wide : 15 cm
High : 19.5 cm
Long : 28.5 cm
PICTURE
Main Image
ACTROS 1863 LS
Ready to print PDF
It’s all quick and easy to make
A4
Build it using common tools and Sheet
easy materials to find.
WARNING
COPYRIGHT INFORMATION
Plans and pa erns in this Package For personal use only, the content owner gives non-exclusive buyer permission
to view, download and copy content. buyers must comply with the content owner rules. The content owner has
exclusive rights to the content that is owned in the present and in the future.
1. Use of content for commercial purposes is prohibited, content cannot be resold, re-licensed or sub-licensed,
leased and mass produced.
2. Distribu ng or sharing content for any reason is prohibited. Sharing of content is only permi ed via the official
website link of the content owner h ps://kayunganjuk.com
3. The reuse of content in the form of photo or video files is permi ed by giving credit to the content owner at
h ps://kayunganjuk.com
Notes to Readers:
Due to individual condi ons, tools and skills, we are not responsible for any damage, injury suffered, or loss that
occurs as a result of following the informa on published in this set of plans. Before star ng any instruc ons
carefully review the project. If you have any doubts or ques ons, please con nue to consult with local experts or
authori es.
CONTENT
Cover ....................................................................... 1
Front View
Rear View
Top View
Bo om View
Rigth View
Le View
2 30
46
51 43 1 4 32
34 28
52 27
29
15
31
53
19
20
49 22
62
63 21
64
65 62
58
59
60
61
IMPORTANT NOTE
1. Before cu ng the material, cover the surface with masking tape or vinyl s ckers, this is to make it easier to s ck
or remove the cut pa ern on the material without leaving glue marks on the material.
2. Make sure the thickness of the material is in accordance with the instruc ons on the cu ng pa ern that we set,
this will greatly affect the construc on and other parts during assembly.
3. Assemble each part using wood glue or PVA glue on the wide part, use a clamp for maximum results, use super
glue or all-purpose liquid glue in small parts.
ALTERNATE DOWELS
In general, we use 5mm diameter food chops cks as a dowel on the wheel and a 3mm diameter toothpick as the
steering wheel.
1
4
Step 1 Step 2
Combine parts 1, 2 and 3 into one sec on, use liquid glue / Combine parts 4 into one sec on (see picture) use super glue /
super glue liquid glue
6
5
Step 3 Step 4
Combine parts 5 into one sec on (see picture) use super glue / Combine parts 6 into one sec on (see picture) use super glue /
liquid glue liquid glue
10
9
Step 5 Step 6
Combine parts 7, 8 and 9, 10 into one sec on, use wood glue / Combine parts into one sec on, use super glue (see picture)
PVA glue then clamp and wait for it to dry.
a er
12
11
before
Step 7 Step 8
Combine parts 11 into one sec on, use super glue / liquid glue Cut part 12 according to the pa ern (see picture)
(see picture)
14
13
12
Step 9 Step 10
Combine part 12, 13 and 14 use super glue / liquid glue (see Combine parts into one sec on, use super glue (see picture)
picture)
17
16
15
Step 11 Step 12
Combine parts 15 and 16 into one sec on, use super glue / Combine parts 17 into one sec on, use super glue / liquid glue
liquid glue (see picture) (see picture)
18 20 19
21
22
Step 13 Step 14
Combine parts 18 into one sec ons, use super glue / liquid glue Combine parts 19, 20, 21 and 22 into one sec on, use super
(see picture) glue (see picture)
24
23
25
26
Step 15 Step 16
Combine parts 23, 24, 25 and 26 into one sec on, use super Combine parts on the le and right side into one sec on, use
glue (see picture) super glue (see picture)
27
30
29 32
28
31
Step 17 Step 18
Combine parts 27 into one sec on, use super glue (see picture) Combine parts 28, 29, 30, 31 and 32 into one sec on, use super
glue (see picture)
42
41
40
39
38
35
37
33 36
34
Step 19 Step 20
Combine parts 33, 34 and 35 into one sec on, use super glue Combine parts 36, 37, 38, 39, 40, 41, and 42 into one sec on,
(see picture) use wood glue / PVA glue then clamp and wait for it to dry.
44
45
43
Step 21 Step 22
Combine parts 43 and 44 on the le and right side into one Combine parts 45 into one sec on, use super glue (see picture)
sec on, use super glue
47
46
Step 23 Step 24
Combine parts into one sec on, use wood glue / PVA glue then Combine parts 46 and 47 on the le and right side into one
clamp and wait for it to dry. sec ons, use super glue / liquid glue (see picture)
48
49 50
Step 25 Step 26
Combine parts 48 into one sec on, use super glue (see picture) drill 3mm diameter on the red marked area, then insert parts 49
and 50, use super glue / liquid glue (see picture)
51 54
52 55
53 56
Step 27 Step 28
Combine parts 51, 52 and 53 into one sec on, use super Combine parts 54, 55 and 56 into one sec on, use super glue
glue/liquid glue (see picture) (see picture)
57
Step 29 Step 30
Combine parts on the le and right side into one sec on, use Combine parts 57 into one sec on, use super glue (see picture)
super glue (see picture)
58
59
60
62
61
Step 31 Step 32
Combine parts 58, 59, 60 and 61 into one sec on, use super insert parts 62 on the inner side, use super glue / liquid glue
glue / liquid glue (see picture) (see picture)
63
64
63
65
Step 33 Step 34
Combine parts 63, 64 and 65 into one sec on without glue (see insert parts 63 on the inner side, use super glue / liquid glue
picture) (see picture)
Step 35 Step 36
insert parts into one sec on(see picture) Combine two parts into one sec on, use super glue (see
picture)
IMPORTANT NOTE
1. Print the cut pa erns that we have set, make sure the print size of the printer is accurate, print as original
documents and do not use a scale, measure the print on each cut pa ern with a ruler, if the size does not match
then adjust the printer se ngs.
2. Use paper glue and paste print cut pa erns on the material according to the thickness we have set, cut follow
the black outline and remove the white area.
18
back cover
material thick 4mm
floor
material thick 4mm
4
material thick 10mm
hole 6mm
hole 6mm
2
3
hole 6mm
hole 6mm
57
5
material thick 10mm
For personal use only 14 https://kayunganjuk.com
Cut Pa ern Actual Size 40 30 20 10 0 10 20 30 40
17
roof
material thick 4mm
11
inner bumber
material thick 4mm
12
hole 3mm material thick 10mm
14
hole 3mm 13
17
24 20
40
23 19
30
20
10
25 21
0
10
NOTE
= drill 1mm diameter to insert blade saw
26 22
20
30
40
https://kayunganjuk.com
Cut Pa ern Actual Size 40 30 20 10 0 10 20 30 40
46 47
45 material thick 5mm
mirror camera material thick 4mm
front 50 49 side
29 30
mirror mirror
4mm 4mm
27
31 28 32
NOTE
= drill 1mm diameter to insert blade saw
right
51
right
52
right
53
left
54
left
55
left
56
62
60 60
61 61
58 58
63 63
65 65
We are basically ordinary human beings, have the wrong nature and forget.
If you find any errors in this plan set, Please forgive and remind us.
Your cri cisms and sugges ons mean a lot to us, so that we can develop and get be er in the future.
Posi ve benefits to the world community.
Contact us
Email : kayunganjuk@gmail.com
Website : kayunganjuk.com
Pinterest : id.pinterest.com/kayunganjuk
Instagram : instagram.com/kayunganjuk
Facebook : facebook.com/fbkayunganjuk
Youtube : youtube.com/c/kayunganjuk