Professional Documents
Culture Documents
Catalogo General Serie PROFLO ANSI 73.1
Catalogo General Serie PROFLO ANSI 73.1
Catalogo General Serie PROFLO ANSI 73.1
Table of contents
General Introduction
Structure
1 POSITIVE SEALING; Fully confined gasket at 5 LABYRINTH OIL SEAL; Carbon filled PTFE
casing joint protects alignment fit from labyrinth seals for chemical resistance
liquid. prevent premature bearing failure caused by
2 ONE INCH OIL SIGHT GLASS; Actual oil level lubricant contamination and loss of oil.
and conditions easily monitored. 6 HEAVY WALLED CASING; The casing has a
3 SOLID SHAFT or REPLACEABLE SLEEVE; Your top centerline discharge for self-venting air.
choice! Maximum shaft deflection less than All pumps have a class 300 wall thickness
,002 inch / ,05mm at face of the stuffing box as standard for longer life under
insures long seal and bearing life and low corrosive/erosive conditions. The Casing
maintenance. A hook-type shaft sleeve features a back pull-out design and integral
(available in a wide variety of corrosion feet.
resistant materials) is free to expand with 7 UNIQUE OPEN IMPELLER; The back pump-
temperature variation. out vanes assure best performance and
4 SIMPLE AND FAST EXTERNAL IMPELLER efficiency and lowest NPSH requirements.
ADJUSTMENT; High efficiency can be 8 MAXIMUM SEALING FLEXIBILITY; Choice of
maintained by adjusting the impeller, packed box or mechanical seal.
resulting in long term energy savings 9 CASING DRAIN STANDARD
Structure
COMPONENT FEATURE BENEFIT
SHAFT Optimum overhung vs. Low deflection (less than ,002 inch) at seal
diameter faces for longer seal and bearing life.
Cross-sectional Drawings
Cross-sectional Drawings
Power Frames “LTX / XLTX”
Optional Features
Jacketed stuffing box: Cooling or heating
of jacket can be provided, depending on
liquid handled and type of sealing.
Optional Features
Dynamic sealing: A repeller can be placed between the stuffing box cover
and impeller to avoid leakage during operation. This eliminates the need
for a mechanical seal and is the best solution for corrosive and slurry
application with low suction.
This also means that our product won’t me diluted. Standard Proflo series
pumps can easily be converted to dynamic sealing.
Performance Curve
12
PROFLO PF SERIES
Standard chemical process pumps designed according to ANSI B73,1M
Standard Dimensions.
Capacity: up to 6000 GPM / 1364 m3h
Head: 730 Feet / 223 Meter
Pressure: up to 375 PSI / 2586 kPa
Temperature: up to 360° F / 180° C
Applications:
For chemical projects in steel plants, power plants, paper and pulp
industry, pharmaceutics, food and sugar industry and other
(Petro)chemical processes.