Professional Documents
Culture Documents
TDA2030 Audio Amplifier
TDA2030 Audio Amplifier
the audio output instrument such as mobile phone jack or a simple microphone so that
you can play it over a speaker or any stereo set. You can use simple opamp circuits
for this case too but if you need a higher amplification then you would need a high
power amplifier IC like this TDA2030 Audio Amplifier. You can use this simple
TDA2030 based Power Supply Audio amplifier board module to directly connect the
input from you instrument to the speaker. It can only be connected to single output
speaker and has an onboard potentiometer to change the volume of the amplified
signal. It also has power indicator to identify the power state of the module.
Working voltage:6-12V
On board 10 k adjustable resistance, can adjust the volume of the
amplification
On board power indicator light
18W Power amplifier circuit
On board TDA2030A Audio amplifier IC
Product Description
To use this module you need to power this with Vcc pin with 6-12V power supply and
connect the audio input to its pins and take the speaker output from PCB connector.
Additional Resources
Package Contents
Working voltage:6-12V
On board 10 k adjustable resistance, can adjust the volume of the
amplification
On board power indicator light
18W Power amplifier circuit
On board TDA2030A Audio amplifier IC
Product Description
o TDA2030A