WORK INSTRUCTION Control Number REV History Established Date
Lathe Machine COP-IPODS-W-PR-01-01 Rev.00 September 5,2023
Step 1 Step 2 Step 3 WORKING PROCEDURE
Note : Always perform 5s before and after work
1. Set-up the machine.
2. Review drawing and prcoess requirements. 3. Check the machine parts and tool holder. 4. Set-up the workpiece to be cut. 5. Check and set-up cutting tools to be use. 6. Switch "ON" the power. Step 6 Step 5 Step 4 7. Push start button for process operation. 8. Remove workpiece. 9. Check and measure workpiece for the required 10. Fill up Traveller Card.
SAFETY REMINDER
● Environmental / Work place Cleaning.
Step 7 Step 8 Step 9 ● Check Switch / Emergency switches. ● Concentrate while setting. ● Keep thing at designated place after use.