Professional Documents
Culture Documents
For Printing Test Questions Q4 TLE6
For Printing Test Questions Q4 TLE6
Department of Education
REGION I
SCHOOLS DIVISION OFFICE OF URDANETA CITY
Urdaneta City, Pangasinan
______________________________________________________________________
DIRECTIONS: Read each item carefully. Write the letter of the correct answer on your
answer sheet.
1. It is the art or technique of decorating wood by burning a design on the surface with a
heated metallic point.
A. pyrography B. staining C. hand carving D. wood turning
2. What is the process of using a lathe to make various forms and shapes of wood?
A. pyrography B. staining C. hand carving D. wood turning
3. How can you make your product attractive and more saleable?
A. Use expensive materials.
B. Copy the work of other people.
C. Enhance and decorate the product.
D. Look for materials from outside the country.
4. The following are reasons why there is a need to enhance your finished product,
EXCEPT one. Which reason is it?
A. It is durable and more beautiful. C. It has a lot of considerations to be done.
B. It is attractive and more saleable. D. It increases sales and brings more profit.
5. What tools are commonly used to polish rough surfaces and edges of the materials to
achieve a very fine texture of the finished product?
A. mallet and chisel C. screwdriver and plier
B. saw and hammer D. sandpaper and hand plane
6. Which type of paint is best used for bamboo and wood products?
A. acrylic paint B. enamel paint C. latex paint D. plastic paint
10. What is used as the fastest way to gather data from a target audience?
A. letter B. newspaper C. radio D. technology
12. What should be given the emphasis on innovating or adding accessories to a product?
A. artist’s style C. number of products
B. customer’s preference D. size of the product
13. It is the process of developing a product that will make it more attractive.
A. boost C. patronage
B. enhancement D. salability
14. What word best describes a product that can withstand extreme weather conditions?
A. accountability C. durability
B. creativity D. marketability
15. How would a customer feel if he receives a product that matches his needs?
A. angry B. disappointed C. sad D. satisfied
16. Which of the following is NOT an effect of innovative finishing materials on the
marketability of the product?
A. It makes the product salable.
B. It gives satisfaction to the customers.
C. It makes the product durable and long-lasting.
D. It doesn’t improve the quality and marketability of the product.
17. This is used as your model in making, sketching, outlining, and shading your product.
A. brush B. paint C. pencil D. subject
18. This is used to produce a rough sketch with thick and dark ink to make the figure of an
image more distinct.
A. outlining B. painting C. shading D. sketching
CID/CES/JAT Page 2 of 6
Document Code: SDOUC-QF-OSDS-SDS-006
Revision: 00
Effectivity date:09-18-2022
Control No. ____________
19. What is the primary purpose of shading in creating an image?
A. To make an image.
B. To make the image more realistic.
C. To make a simple appearance of an image.
D. To darken or brighten the color of an image.
20. Which of the following sentences states a correct procedure for enhancing a product?
A. Start shading from a source of light.
B. Apply finishing material before shading.
C. Use dark colors in the parts with shade.
D. Start sketching using a fine-tip brush with paint.
21. What do you call a document designed to guide you in the execution of a project?
A. Action Plan C. Project Plan
B. Budget Plan D. Proponent Plan
22. Which part of the project plan contains the quantity of the materials to be used?
A. Bill of Materials C. Tools Needed
B. Procedure Plan D. Work Drawing
23. What part of the rubric identifies the learner’s level of performance?
A. indicator B. performance C. rating scale D. tool
24. What will you do to get a rating of 5 as the highest in an output that uses indigenous
materials?
A. Use 25% indigenous materials in making the project.
B. Use 50% indigenous materials in making the project.
C. Use 75% indigenous materials in making the project.
D. Use 100% indigenous materials in making the project.
25. What is the fastest and easiest way to look for information and details on how to
construct gadgets?
A. books B. electrician C. internet D. neighbors
26. What tool is used to remove insulators from the electrical wire?
A. electric drill B. hand pliers C. soldering tools D. wire stripper
28. Who is the best person to call in case you have a new gadget or device that needs
repair or maintenance?
A. fireman B. teacher C. technician D. policeman
CID/CES/JAT Page 3 of 6
Document Code: SDOUC-QF-OSDS-SDS-006
Revision: 00
Effectivity date:09-18-2022
Control No. ____________
29. What electrical equipment is used to know if there is an electric current flow in a
source?
A. gauge B. tester C. screwdriver D. steel tape
32. What is the importance of wearing rubber gloves while working with electrical gadgets?
A. To avoid electrical surges.
B. To make hands free from dirt.
C. To follow the instructions of your teacher.
D. To earn additional grades from your teacher.
33. What characteristics does one need to produce the desired output?
A. efficiency B. effectiveness C. skill D. talent
34.Ruben is making handicraft project. What finishing method can be apply to finish his
project in a fastest possible way?
A. brush method B. dip coating C. roller coating D. spray method
36. The grade 6 pupils prepared boxes with labels plastic, paper and glass. What principle
of Five S did the grade 6 pupils consider?
A. Sorting C. Systematic Cleaning
B. Straightening D. Service
37. Sonia and her group cleaned the work area and restored everything to its place after
their activity. What principle of 5S did they apply?
A. Sorting C. Systematic Cleaning
B. Straightening D. Service
41. What do we call the materials or substances which are discarded after primary use?
A. construction B. product C. recyclable D. waste
42. What is the process of turning waste products into useful products?
A. recycling B. reducing C. refusing D. reusing
43. Which of the following are examples of construction and demolition waste?
A. wood and metals C. surgical wastes and needles
B. cellphones and televisions D. cement and processed food
45. It is the process where non-recyclable and recyclable materials are separated.
A. collecting B. processing C. segregating D. sorting
46. What is the first step of recycling where you gather materials from different sources?
A. collecting B. processing C. segregating D. sorting
47. When working on a project that is new to you, what is the best thing to do before you
start?
A. Ask the assistance of a friend.
B. Ask for the assistance of an expert.
C. Ask for assistance from your classmates.
D. Ask for the assistance of the person available.
48. These materials can be transformed into garden decorations such as birds, swans, and
other figures.
A. heavy metal B. papers C. used tires D. wood
49. Which of the following materials can be used to beautify our walls or cabinets?
A. metal B. used tires C. wine bottles D. wood
50. What are the best waste materials you can recycle?
A. Waste materials that can be found abroad.
B. Waste materials that can be found in hospitals.
CID/CES/JAT Page 5 of 6
Document Code: SDOUC-QF-OSDS-SDS-006
Revision: 00
Effectivity date:09-18-2022
Control No. ____________
C. Waste materials that can be found in far places.
D. Waste materials that can be found in your community.
Prepared by:
JELLIE M. GIRAY
Test Constructors
MICHAEL S. BARROZO
Test Constructors
Facilitator:
TERESA C. ASPIRAS
Master Teacher I
JEAN A. TROPEL
Education Program Supervisor I- EPP/TLE/ TVL
Noted:
CID/CES/JAT Page 6 of 6
Document Code: SDOUC-QF-OSDS-SDS-006
Revision: 00
Effectivity date:09-18-2022
Control No. ____________